Supply, Delivery Installation of Submersible Pumping Machinery alongwith allied Electro Mechanical works, Voltage Stabilizer and Automatic Chlorinator etc. for Augmentation to Accommodate FHTC at Pump House NoII under Senpur WS Scheme in Krishnaga

Amount

Supply & delivery at site the following pumping machinery & electrical accessories etc. Submersible pumping machinery directly coupled with water proof suitable size motor having following specification: P U M P DISCHARGE ( 612 -LPM/ 37 M3/HR) H E A D: 55 mtr.) S H A F T: S.S/MS IMPELLER: G.M./Bronze/S.S./Chrom Steel/Noryl OUTLET SIZE: 80mm/100mm/125mm PUMP EFFICIENCY IN PERCENTAGE: Minimum 65% M O T O R Submersible type, 3 ph.,50 Hz.,415V,.± 10%/ Volts, RPM—2900 with wet type winding (Preferably 12.5 H.P.) *N.B. (A) H/Q charateristic curve chart of pump set should be submitted before delivery. (B) Test certificate of pump & motor should be submitted during delivery.

4 sq.mm.3 core, 1.1 KV grade, PVC insulated, water proof flat Submersible Cu. cable .

100A, TP, 415V main switch in sheet steel enclose with neutral link rewireable porcelain fuse unit .

Supply and delivery at site pipes,valves specials,gauges etc. as per following specification :- a) 80 mm. dia. UPVC column pipe with suitable thread on both side and pvc socket at one end with following dimension.

i) 3 mtrs long

ii) 1.5 mtrs long

iii) C.I. adapter (top)

iv) C.I.adapter (bottom)

b) Heavy type suitable dia.M.S.suspension clamp made of 80mm. X 10 mm. M.S. flat with nuts,bolts,washer etc.

I) 80 mm. dia. CIDF Sluice valve (Non rising spindle type) - 1 no, CIDF Non return valve (Single door type) - 1 no, M.S. cross -1 no, CIDF/MS enlarger - 1 no, CIDF short piece - 2 nos. of required length, flanged tail piece - 1no, CIDF bend - 1 no, steel plug, MS nipple, flange, nuts, bolts etc. and other required materials for the job i.e. for making complete construction of delivery & wash out line conforming to relevant IS (i.e. IS 14846 for SV and IS 5312, Part - I for NRV). NB:- (A) Test certificate of valves should be submitted at the time of the delivery. M.S. specials should be minimum 7 mm thick.

ii) Three-Phase actuator operated wafer type butterfly valve (PN-1.0 rating, N.B dia. 80 mm) as per BS-5155 having valve body of CI (Grade IS 210 FG 260) and shaft stainless steel (AISI-410)

iii)Installation of above main switch etc. in the pump housse and actuator operated CI butterfly valve including supply of 12 core, 2.5 sq. mm. copper control cable, CI short piece, bend, compensating MS flange, nuts, bolts, gaskets and other fixing materials required to complete the job in all respect along with testing the installation upto entire satisfaction of EIC. (incl. supply of necessary Spirals’ reqd for orientation of pipeline).

iv) 100 mm dia, 0-7 kg/cm2 range, wall mounted pressure gauge complete with steel & brass stop cocks. i) Tubewell inside the pump house. ii) Tubewell outside the pump house (This cost includes 15 mm. Dia. G.I. Pipes of approx 30 ft. length & specials)

v) Split type M.S.fabricated suitable size tubewell cover having thick- ness 6 mm. for housing pipe with necessary fastening arrangement alongwith provision of colomn pipe, air pipe, cable entry gland etc.

vi) 100 mm. Dia.wall mounted depth gauge with all suitable dia.and length of steel air pipe with all fittings including supply of one good quality Hand pump. Tubewell outside the pump house. (This cost includes 15 mm. Dia. G.I. Pipe of required length and specials).

vii) Anti - snapping safety device for above pump by supplying suitable size heavy type M.S. clamp ( 3 sets ) and 1'' dia. nylon rope of required length ( double ) including supply of all necessary materials as required .

Supply & fitting fixing of 100A Fuse unit (Both base & bridge) on the wall by supplying of all necessary materials as per I.E. Rules and direction .

Installation of above supplied P/Machinery along with coloum pipes, safety device, submerssible cable etc. after withdrawing the existing P/M set & accessories as per direction. This cost includes the cost of interconnection of submerssible cable with starter through conduit pipes as required and also in concealed manner under the floor including cutting & mending damages of floor as required as per direction. a) Inside P/H. b) Outside P/H. (This cost includes arrangement of derrick and drawing of cable and supplying of lifting tools & accessories) after withdrawing the existing P/M set & accessories.

Fitting & fixing of above supplied valves, specials etc. with existing rising main by supplying of all necessary materials as required to complete the work as per direction. This also includes the cost of painting of valves and specials with enamel paint over a coat of anticorrossive paint. The colour coat and brand will be decided by the EIC .

Part B - Voltage Stabilizer Supply and delivery at site of 20 KVA, 3phase, oil cooled type Servo Motor operated copper wound line voltage corrector conforming to IS-9815 (Pt.-1)-1994 suitable for unbalanced input voltage with following specification including first filling oil as per IS-335 where applicable.

Supply & delivery of the following materials at site :-

a) 100A 4 Pole On load change over switch.

b) 100A TPN Rewireable type main switch.

c) 100A 4Way Cu Bus bar chamber by 16 BG sheet steel enclosure including porcelain chair with painting complete.

d) 25 Sq.mm. 3.5 core 1.1 KV grade, Al., Armoured cable.

Making brick built foundation with supplying of all required materials suitable for the above voltage stabilizer by 4:1 cement mortar including holding down foundation boalts ( If requird) and plaster with neat cement finish as per direction of E.I.C

Fitting, Fixing and connection of above supplied changeover switch, bus-bar and main Switch on the wall by supplying all necessary materials to complete the job.

Installation of the above voltage stabilizer on the foundation including all connection complete as per direction of E.I.C.

Drawing and connection of cable on wall [Item no. 8.40 and all connection complete with all equipment as per requirement and as per direction.

Making joints of the cable by supplying compression type gland thimble, socket etc.as per requirement and as per direction of EIC.

Earthing with 50 mm dia. G.I. pipe, 3.65 mm thick & 3mtrs long (2 sets) and conn. by 25 x 6 mm G.I. strip ( for reqd length) upto the earth bus-clamp with the equipments on wall/floor with staplesburied inside as reqd. at site and with 25 mm x 6mm GI flat strip to earth electrode pipe,fastening with 13mmx80mm S.S bolts,nuts,washers, including all f & f of materials & filling & restoring the surface by ramming &making suitable earthpit with brick structure & MS lid on top as per direction.

Making internal/external electrification of P/House by 2 x 1.5 sq.mm. P.V.C. cu wire through suitable size casing/capping for 4 nos. point ( 1 no. bracketpoint , 1 no. tube light point , 1 nos. bulk head point and 1 fan point ) and 1 no. 5A ,5 pin plug point with earthing attachment of 1 x 1.5 sqmm cu. Wire with supplying of tube light fittings (Make-As per approved vendor list.), fan(5* rating), bulbs as per approved make including suppying and fixing 10 A. DP MCB (As per approved vendor list.) make on wall all complete as per I.E. rules and direction. (including making external illumination by Supply & fixing of 1 no. 40W LED IP 66 fixing of Supply & installation of MS bracket & connection complete) Make : As per Approved Vendor List.

Testing the entire installation as per satisfaction of Engineer-in-Charge.

Add: GST @ 18%

Add: LW Cess @ 1%

DAS ENTERPRISE

RAKA ENTERPRISE