Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹41.3 LAccepted-AOC 20 1 B M BANERJEE ROAD BELGHARIA KOLKATA 700056 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700056 | L-1 | Accepted-AOC ACCEPTED | |
| 2 | L-2₹44.5 L+₹2.3 L (5.47%)Rejected-Finance | L-2 | Rejected-Finance Being higher bid value. | |
| 3 | L-3₹45.7 L+₹3.5 L (8.25%)Rejected-Finance | L-3 | Rejected-Finance Being higher bid value. | |
| 4 | L-3₹45.7 L+₹3.5 L (8.25%)Rejected-Finance 3 IBRAHIM ROAD KHIDDERPORE KOLKATA 700023 | KOLKATA | WEST BENGAL | 700023 | L-3 | Rejected-Finance Being higher bid value. | |
| 5 | L-4₹46.1 L+₹3.9 L (9.26%)Rejected-Finance 51 1 FULBAGAN ROAD BAGHAJATIN KOLKATA 700086 WEST BENGAL | KOLKATA | WEST BENGAL | 700086 | L-4 | Rejected-Finance Being higher bid value. |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
20 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alipore Kolkata
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
REPAIR TO E/M INSTALLATION, MES ESTABLISHMENT AT TURF VIEW AND WATER SUPPLY INSTALLATION OF OLD IMH COMPLEX UNDER GE ALIPORE KOLKATA
2023_MES_634989_1
GE/ALP(8291B) KOLKATA OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Alipore Kolkata
CLASS D Category a (i)
9 documents required · 9 mandatory
₹500
Garrison Engineer Alipore
₹80,000
Yes
GE Alipore Kolkata
20 Feb 2024
30 Dec 2023
27 Jan 2024
30 Dec 2023
20 Jan 2024
13 Jan 2024
30 Dec 2023 - 6 Jan 2024
8 Jan 2024
Amount
Excavation over area n.exc 1.5 m in depth and getting out in soft/loose soil for foundation etc complete all as directed.
Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and directed.
Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc. of any descriptions complete all as specified and directed.
M&L for 40 mm thick damp proof course in cement concrete (1:2:4), type B-0 (using 12.5 mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
Material and labour for brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
All as per Item No 7 above but except brick etc complete all as pecified and directed.
Material and labour for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc complete all as specified and directed.
Chipping of unsound/weak concrete materials from slabs , lintel,chajja, fin, facia etc. by any means as directed including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting including foreign matrials , loose concrete/aggregate etc for 25mm average thickness. and disposal of all debris out of MOD land (upto ten storey bldg) complete all as specified and directed
All as per item No 11 above but 50 mm average thickness for beams/column complete all as specified and directed.
M&L for removing of concrete all around reinforcement including from behind the reinforcing bars to give an avrage 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer's instruction to give it a totally rust free finished steel surface upto 12 mm dia bar (upto ten storey bldg) complete all as specified and directed. (Make: SIKA/FOSROC)
All as per Item 13 above but for above 12mm dia bars complete all as specified and as directed.
Supply and application of a coat of epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 (upto ten storie bldg) complete all as specified and directed. (Make: SIKA/FOSROC).
M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed )upto ten storey bldg).
M&L for introducing new reinforcement bars up to 12mm dia for structural connections in RCC beam, lintels, columns and slabs including power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling , fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc (upto ten storey bldg) complete all as specified and directed.
Supply, mixing and application two component structural grade polymer modified reinstatement morter, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm 2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm 2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm 2 upto 25 mm average thickness (upto ten storey high building) complete all as specified and directed. Make :- Sika/Fosroc NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand ) with polymer admixed in proportions approved by Engr-in-charge)
M&L for applying curring compound or equivalent, over concrete surface as curing compound as per manufactures instructions, (upto ten storey building) complete all as specified and directed.
Materials and labour for 15 mm thick rendering on other then fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement (upto 12 storeys bldgs) complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick walls or concrete surface, finishing even and smooth (without using extra cement) etc including necessary working platform upto 12 storeys bldgs complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement including necessary scaffolding upto 12 storeys bldgs complete all as specified and directed.
Material and labour for 10mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling and finished the surface even and smooth without using extra cement complete all as specified anddirected.
Demolition of cement concrete (reinforced) in any position (below or above G.L) etc complete all as specified and directed
M&L for RCC 1:2:4 (Nominal Mix) in type-B1 (using 20mm graded stone aggregate) as in foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.
M&L for RCC 1:2:4 (Nominal Mix) in type-B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specifed and directed.
M&L for RCC 1:2:4 (Nominal Mix) in type-B1 (using 20mm graded stone aggregate) as in beams cantilevers, bressummers,lintels over 1.5m span etc complete all as specifed and directed.
M&L for RCC 1:2:4 (Nominal Mix) in type-B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specifed and directed.
M&L for formwork to flat rough finished surfaces of concrete sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L for formwork to flat rough finished surfaces of concrete sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L for formwork to flat rough finished surfaces of concrete sides and soffits of floor or roof beams, beam aunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed.
M&L for formwork to flat rough finished surfaces of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.
M&L for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Dismantling of plain or corrugated aesbestos sheet any gauge, thickness in roof coverings complete all as specified and directed.
M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.56mm of an colour having tensile strength of Alloy 31000 H4 as in ridges, valley gutter, drip and straight to flashing (length and, fixed girth as fixed) with self tapping screws complete all as specified and directed.
S&F for steel work of MS Square/round pipe or angles, Tee etc as in purlin, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specfied and directed.
S&F in repair for fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc with L-type or J-type or cranked hook bolts etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick , watering, and removing surplus soil to a distance n.exc 50 m and making good surface in any type of soil complete all as specified and directed..
M&L for PCC 1:3:6 , type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
S&F for MS section for post and struts in fencing including cutting tops to shape as directed drilling holes etc and simmilar work including all nesecery work conforming to FE-290 Gde E-165 complete all as specified and directed.
Fixing only MS section for post and struts in fencing including cutting tops to shape as directed drilling holes etc and similar work including all necessary work conforming to FE-290 Gde E-165 complete all as specified and directed.
Supply and fixing for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming Fe-290, Gde E-165 complete all as specified and directed.
Supply and fixing for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars, barred iron doors, iron gate, ladders; framed balusters, ways : railing : frame work of watertanks and similar work conforming Fe-290, Gde E-165 complete all as specified and directed.
Supply and fixing in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)
Supply and fixing for stainless steel razor concertina coil, fencing 600 mm dia, consisting of spiral with sharp edged tape crimped to a steel wire duly galvanised with scrapper barb having 51 spirals with 125 clips (when strtched to a length of 6 m) and fixed to MS frame work, including necessary boards or GI barbed wire tied with angle iron complete all as specified and as directed.
Supply only M.S Galvanised chain link fencing any size or type.
Fixing only chainlink fencing including line wire any mesh size and type of any type of standard, rails, straining bolts etc. including provision of binding wire.
S&F for MS flats to receive expanded metal or fabric etc and staining with welding complete all as per specified and directed.
M & L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long with dia 11 to 15 mm complete all as specified and directed.
S&F for 10 mm dia of mild steel round bars for holding chain link fencing conforming to Fe-410-s or Fe 410-0, cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends complete all as specified and directed.
M & L for two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces exc 0.10mtrs in girth (first grade quality) complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing debris and rubbish off the premises complete all as directed.
Material and labour for non-skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.
Material and labour for non-skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15 mm thick cement plaster for backing coat in CM (1:6) complete all as specified and directed.
Material and labour for non - skid ceramic coloured floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.
Material and labour for glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.
M&L for 10 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Material and labour for 20mm thick pre-polished cement concrete designed coloured pavement/chequered tiles having area of each tile not exc -16 sqm in size glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, apronsm paved laid dry or laid dry and pointed etc complete all as specified and directed.
Material and labour for 80 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-40 grade with grey cement and pigment complete all as specified and directed.
All as per item 63 above but except tiles complete all as specified and directed.
Material and labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 grade with grey cement and pigment complete all as specified and directed.
All as per item 65 above but except tiles complete all as specified and directed.
Material and labour for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, coooking platform and other similar situations
Demolition of cement concrete (unreinforced) of any descriptions, below or above ground floors (Floor topping, sub base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.
Material and labour for providing plain cement concrete (1:2:4) , type B1 (using 20mm graded stone aggregate) as in coping and the like including weathering, slightly rounded or chamferred angles and throating complete all as specified and directed.
Material and labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.
Material and labour for 100mm thick plain Cement concrete (1:2:4),type B- 2 (using 40mm graded stone aggregate) as in floor, hard standing and like complete all as speficied and directed.
Material and labour for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving finished the surface even & smooth without using extra cement complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.
M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and removing from site complete all as specified and directed.
All as per item No 76 above here in before but exc 1.5 sqm but not exc 4 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area exc 1 Sqm but n exc 2 sqm each, all as specified and directed.
Supply & fixing for 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred put together with glue, pinned at joints complete all as specified and directed.
Supply and fixing for mild steel flat iron of size 25x3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O (upto 12 storied bldg) complete all as specified and directed.
Supply & fixing for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for 35mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (wihout sash bars), edge of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc sizes of memebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.
Supply and fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match,reinforced with MS Sq tube in opening all as shown on drawing (upto 12 storied bldg) and specified and as directed.
S&F for factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.
Supply and fixing for 75mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and directed.
S&F for stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed.
S&F for 125mm long aluminium anodised extruded handles fabricated type, all as specified and directed.
S&F aluminum anodised barrel tower bolt of extruded section 150 mm size.
S&F for aluminium anodized barrel tower bolts, extruded section 200mm long.
S&F for aluminium sliding door bolt 300mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.
Supply & fixing for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples complete all as specified and directed.
Supply & fixing in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.
Hacking out old broken glass of any thickness, sizes quality on description from metal frames including punching or drilling out old glazing pins/spring clips.
Supply and fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and directed.
S&Supply & fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sqm in each pane complete all as specified and directed.
S&F for 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane.
Supply and fixing as in repair drapery rod made of electric resistance welded MS pipe of 21 mm dia having a coating of corrugated virgin PVC extrusion and cover with ABS plastic incuding brackets and knobs etc complete all as specified and directed.
Supply & fix as in repair for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per item No 99 above here-in-before but without glazing bars.
S&F for powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and directed.
Taking down 15 mm dia old steel water tubing and connections in any position complete all as specified and directed.
Taking down 20 mm dia old steel water tubing and connections in any position complete all as specified and directed.
Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed.
Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed.
Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and directed.
Supply and fixing in repair vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts including PVC seat cover and making all necessary connections complete all as specified and directed.
S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest including P or S trap complete including cement concrete(excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete all as specified and directed.
S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed.
S&F in repairs vitreous china wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.
S&F in repairs vitreous china wash basin (coloured), pedestral pattern, bowl size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.
S&F in repairs vitreous china wash basin (coloured), oval size for counter top, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.
S&F in repair 15mm bore brass CP bibcock fancy type long body with crutch or butterfly handle complete all as specified and directed.
S&F in repair 15mm bore brass CP stopcock concealed type fancy type,with crutch or butterfly handle complete all as specified and directed.
S&F in repair 15mm bore brass CP angular stopcock type with crutch or butterfly handle complete all as specified and directed .
S&F in repair PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and directed.
S&F in repair brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and directed.
S&F in repair 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete with brass chromium plated screw complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair brass CP health fucet with chromium plated brass screws etc complete all as specified and as directed.
M&L for preparation of newly plaster surfaces of wall and applying two coats of oil bound distemper etc complete all as specified and directed.
M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old distempered and painted surface and applying one coat of oil bound distemper etc all as specificed and directed.
M&L for preparation of newly plaster surfaces of ceiling surface and applying three coats of white wash on walls complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling surface etc complete all as specified and directed.
M&L for preparation of old surfaces of ceiling and applying one coat of white wash on ceiling surfaces complete all as specified and directed.
M&L for preparation of newly plaster surfaces of wall and applying two coats exterior acrylic emulsion paint on external surface including nescessary scaffolding complete all as specified and directed.
Material & labour for preparation on new plastered surfaces of wall and applying two coats of cement base paint (upto ten storey bldg) complete all as specified and directed
M&L for preparation of old surfaces of wall and applying one coat exterior acrylic emulsion paint on external surface including nescessary scaffolding complete all as specified and directed.
S & F for 2mm thick wall care putty on wall/ceiling complete all as specified and directed.
M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and applying one coat of cement base paint etc all as specificed and directed.
M&L for two coats of synthetic enamel paint to wooden surfaces (frame & shutter) over a coat of primer including preparation of wooden surface of any description, not otherwise descri-bed, over 10cm width or girth all as specificed and directed.
M&L for preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for two coats of synthetic enamel paint to steel surfaces (frame & shutter) over a coat of red oxide primer incling preparation of steel surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.
M&L for preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc all as specified and directed.
Supplying and fixing in repair 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and directed.
S & F for oiling/greasing existing rolling shutters for easing adjusting for smooth functioning of steel rolling shutter complete all as specified and directed.
S&F for lock plate bracket made of angle 40X40X5 mm, flat 25X6 mm, cleat, latice flat & locking arrangement etc of rolling shuttes including necessary welding / riveting and one coat of red oxide primer including taking down old lock plate compe all as specified.
S&F for mild steel slot profiles of 1mm thick including taking down old profiles complete all as specified and directed.
Supply and fix in repairs PVC (SWR) pipes 110 mm dia, single socketed, in any length with rubber ring joints fixed to wall with bracket complete all as specified and directed .(upto 12 storey of building)
Supply and fix in repairs PVC (SWR) pipes 75 mm dia, single socketed, in any length with rubber ring joints fixed to wall with bracket complete all as specified and directed.(upto 12 storey of building).
Supply and fixing for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. (upto 12 storey of building)
Supply and fixing for 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. (upto 12 storey of building)
Supply and fixing for 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed. (upto 12 storey of building)
Material and labour for 50mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in flooring and finished the surface even and smooth with using extra cement complete all as specified and directed.
Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in surface channel and drains including necessary formwork complete all as specified and directed.
Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds,mi-tred/stopped ends etc complete all as specified and directed.
All as per item No 148 above but add or deduct for each 25mm girth or part there of over or under 30cm and complete all as specified and directed.
M&L for PCC 1:4: 8, type D2 (using 40mm graded stone aggregate) as in foundations, filling mass concrete complete all as specfied and directed.
Dismantling bitumenous felt/old water proofing treatment of any type and disposed of the same complete all as specified and directed.
M&L for PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as roof kerbs/pading, with water proofing compound etc complete all as specified and directed . (WPC will be measured and paid seperately).
M&L for water proofing treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and directed :- (a) Rendering 10mm thick in cement mortar 1:4, plastered surfaces finished even and smooth. The plastered surfaces shall be cured properly for 7 days by ponding of water over roof. (b) Preparing and cleaning of fully dry plastered surfaces as per IS:3067-1966. (c) Applying bitumen primer conforming to IS-3384-1986 over the cleaned plastered surface @ 0.30 Litre per Sqm. (d) Applying evenly one coat blow hot bitumen of grade 85/25 @ 1.20 Kg per Sqm on primed surfaces. (e) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weighing 3.50 Kg per Sqm (reinforced) with Polyster Non-woven fabric weighing not less than 160 grams per Sqm by torch application. The Overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (f) Applying one coat of aluminium Paint @ 0.10 Litre per Sqm over APP based polymeric membrane.(Up to 12 storey Bldg)
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm hick screed bed CM (1:6) complete all as specified and directed.
M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dedo and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as specified and directed.
M&L for preparing old surface and complete removal of existing treatment including application of 2mm thick wall care putty(each 1mm thick) also appling two coats of exterior emultion weather paint for over head tank having staging height approx 21m consisting 12 nos of coulmn and 20 Nos of beam having size of storage thick approx(L=11m, W=9m and ht=3.5m) including all scaffoding etc complete all as specified and directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5mm) including making drainage opening wherever required complete all as specified and directed.
M&L for preparation of new concrete surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed.
M&L for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 sqmm two runs single core for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade ISI Marked complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylum/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.
All as per item No. 160 above but for 5 Amps socket on same board complete all as specified and directed.
All as per item No. 160 above but for 05 A socket on independent board complete all as specified and directed.
All as per item No. 160 above but for 15 A independent socket with 2.5 sqmm copper conductor complete all as specified and directed.
Dismantling and taking down carefully sub-main wiring any size including wooden batten etc and making good the disturbed surfaces of wall/ floor to match the existing wall/ floor etc complete all as specified & directed.
Material and labour for circuit/sub-main wiring concealed with two runs of 1100 V grade FRLSH PVC insulated & unsheathed 1.5 Sqmm single core multi stranded copper conductor cable alongwith one run of 1.5 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable green for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and directed. Note : (i) Three runs of 1.5 Sqmm cable and one run of concealed conduit shall be measured as one length.
Material and labour for circuit/sub-main wiring with two runs of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and directed .. Note : (i) Three runs of 4.0 Sqmm cable and one run of concealed conduit shall be measured as one length.
Material and labour in for replacement of three phase sub-main wiring with four (R,Y,B, N) run of 1100 V grade PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC concealed conduit complete all as specified and directed. Note : (i) Five runs of 6.0 Sqmm cable alongwith one length of concealed conduit shall be measured as one length.
S & F for ceiling rose, 3 terminal, PVC/ polycarbonate insulated body, 230 V.
S & F for piano switch flush type single pole one way 5 Amps, 230 V complete all as specified and directed.
S & F for socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified and directed.
S&F for socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed.
S & F for switch piano flush type, single pole one way 15 Amps, 230 V complete all as specified and directed
S & F for electronic ceiling fan regulator (2 Module stepped type) flush type suitable for 230 V AC complete all as specified and directed.
Supply and fixing for MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/Schineider.
Supply and fixing for MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : C&S /Legrand/ Havells/L&T.
Supply and fixing for MCB 40 Amps to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.
Supply and fixing for SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.
S&F for LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : (Crompton Cat No:CCS-103-05-65-SL-DP-NWH)/Baja(Cat No:- BCLSB 20 W WH)/ Havells (Cat No- LHEXBLP7PN1W020)
All as per item No 178 above but LED tube light of 2 ft and 1 x 10 Watt LED lamp complete all as specified and directed. Make : Crompton( Cat No- CCS-102-10-65-SL-DP-NWH)/ Havells(Cat No- LHEXACP5IN1W010)/ Bajaj(Cat No- BCLSB 10 W WH).
Taking down carefully celing fan/exhaust fan and depositing to MES Store.
Fixing only ceiling fan complete all as directed. Note:- New/Repaired ceiling fan shall be issued from MES Store free for fixing
Supply and fixing for LED street light with IP 66 protection and front toughen glass luminaries of capacity 45 watt with high power LED and ensure uniform light distribution including taking down old HPSV/MH light fitting complete all as specified and directed Make- CROMPTON (CAT NO-LSTS-45-CDL-M)/BAJAJ (CAT NO- BRLEP 45W LED V2)/HAVELLS (CAT NO- ENDURASUNDOWNSL45WLED765PASYBOPC)
S&F for GI bracket for street light of 40 mm dia light grade GI pipe 1.20mtr length bent to shape including fixing clamps, nuts and bolts,/cement work and painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation or for laying of cable , fixing of pole etc and getting out in soft/loose soil complete all as specified and directed.
Disconnecting and taking out old unserviceable cable of any size from wall, trench, floor etc complete all as specified and directed.
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of under ground cable including spreading and punning down to desired thickness complete all as specified and directed.
Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 10 sq. mm 4 core in trenches / through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc complete all as specified and directed. Note:- Earth work, bricks protection, sand cushioning shall be measured and paid seperately.
S & F for GI pipe light grade 50mm tubes with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
Supply and laying for burnt brick sub class 'B' of size 25 X 12.5 X 7.5 cm locally available best quality laid in trenches for protections of under ground cable complete all as specified and directed.
Returning, filling in trenches including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level , not exceeding 1.5 metre above the starting point complete all as specified and directed.
NESAIL CORPORATION
DILIP CONSTRUCTION
M/S J S ENTERPRISES
NUPUR CONSTRUCTION
DIPAK ENTERPRISE
RADHA ENTERPRISE
SEN ELECTRIC WORKS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .