Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.4 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹47.2 L+₹19,906.90 (0.42%)Rejected-Finance SAHEBPARA RAOD UPPER BAGDOGRA P O BAGDOGRA DISTRICT DARJEELING WEST BENGAL PIN 734014 | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹47.2 L+₹21,840.55 (0.46%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹47.4 L+₹40,706.45 (0.87%)Rejected-Finance UPPER BAGDOGRA PO BAGDOGRA DIST DARJEELING PIN 734014 WB | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹47.6 L+₹57,468.60 (1.22%)Rejected-Finance STALIN NAGAR PANIGHATA ROAD PO BAGDOGRA DIST DARJEELING WB | BAGDOGRA | DARJEELING | WEST BENGAL | 734422 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹45.3 L
EMD Value
₹90,600
Closing Date
24 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BENGDUBI
Bengdubi Military Station PO-Bengdubi, Dist-Darjeeling, Pin 734424
ADDN ALTN OF DISTRIBUTION PIPE LINES OF MD ACCN KP CS C ZONE AND CERTAIN MINOR WORK UNDER AGE E M OF GE BENGDUBI MIL STN
2022_MES_533714_2
8370/E8
Open Tender
Civil Works
Item Rate
180 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class D and above with category a(ii)
8 documents required · 8 mandatory
₹500
GE BENGDUBI
₹90,600
Yes
12 Nov 2022
10 Sept 2022
26 Sept 2022
10 Sept 2022
24 Sept 2022
19 Sept 2022
Amount
SCHEDULE 'A' (B/R Items)
Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified.
Excavation in trenches not exceeding 1.50 m wide and 1.5 mtr depth for foundation etc, not exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.
Excavation over areas not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
Ditto all as per item No. 3.00 here-in-before but exceeding 1.50mtr wide and not exceeding 3.0mtr deep
Returning filling in including spreading, leveling watering well ramming in layers not exc 25cm thick complete all as specified and as directed.
Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.
Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.
Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick in rough finish of concrete surface etc., complete all as specified and directed.
M&L for brick work with fly ash brick (old size), straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed.
M&L for brick work with with sub class 'B' brick, straight or curved on plan to any radius half brick thick honey comb walling built in In cement mortar 1:4 complete all as specified and directed.
M&L for brick work with fly ash brick (old size), straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.
M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per item No. 17.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.
M&L for Rendering 15mm thick in on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)
Supply only water proofing compound (Liquid) complete all as specified and as directed.
M&L for rendering 10 mm thick in CM (1:6) on ceiling concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed.
M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde -E-165 etc complete all as specified and directed.
S&F Hard drawn steel wire fabric in available size weight not exc 4.00 Kg /sqm for the tank caging etc including welding, riveting, framing etc, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.
S&F 15mm bore medium grade, galvanized steel tubing (concealed) with and including all fittings, fixed to walls & ceiling or laid in floors (including short length) complete all as specified and as directed.
Ditto all as per item 26.00 here-in-before but 20 mm bore pipes.
Ditto all as per item 26.00 here-in-before but 25 mm bore pipes.
S&F rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including inlet, outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position complete all as specified and directed.
S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed etc complete all as specified and directed.
S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20mm bore and fixed as in repair complete all as specified and directed.
S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25mm bore and fixed as in repair complete all as specified and directed.
S&F mild steel rolled sections Fe 410-W (Gde E-250) quality - B as in main and cross beams, hip and jack rafters; truss, purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate, framing for cladding, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and directed.
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.
M&L for precast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.
M&L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.
M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.
S&F 100mm bore cast iron soil, waste and vent pipes (sand cast), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast/fixed in wall complete all as specified and directed.
S&F 110 mm dia cast iron vent cowl complete all as specified.
M&L for Plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.
M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.
Cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar(1:1) 150mm internal dia of pipe complete all as specified and directed.
S&F in repairs Salt-glazed stoneware gully traps, square or round mouthed, type `P', 'q' or 'S' of size 150x150 including for conecting to drains and setting in cement mortar 1:1 complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints to be given every 3m interval and corners of building and filled with bituminious mastic mortar or equivalent fillar complete all as specified and directed.
M&L for cement concrete chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete including provision of 20mm screed in CM 1:6, complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed including formwork if required complete all as specified.
SCHEDULE 'A' (E/M Items)
M&L for PCC 1:3:6 type C2 using 40 mm grade cruhed stone aggregate for making good the road/path etc. complete all as specified and directed.
Taking down GI pipes 15 mm dia from trenches/walls etc all as directed
Taking down GI pipes 20 mm dia from trenches/walls etc all as directed
Taking down GI pipes 25 mm dia from trenches/walls etc all as directed
Taking down GI pipes 40 mm dia from trenches/walls etc all as directed
Taking down GI pipes 50 mm dia from trenches/walls etc all as directed
Taking down GI pipes 80 mm dia from trenches/walls etc all as directed
Taking down GI pipes 100 mm dia from trenches/walls etc all as directed
M&L for 15 mm Bore of steel water tubing medium grade galvanised with new fitting laid in trenches complete all as specified and directed.
Ditto all as per item 56.00 here-in-before but 20 mm bore of pipes.
Ditto all as per item 56.00 here-in-before but 25 mm bore of pipes.
Ditto all as per item 56.00 here-in-before but 40 mm bore of pipes.
Ditto all as per item 56.00 here-in-before but 50 mm bore of pipes.
Ditto all as per item 56.00 here-in-before but 80 mm bore of pipes.
Ditto all as per item 56.00 here-in-before but 100 mm bore of pipes.
S&F PPR (Poly Propylene random co-polymer) pipe size 110mm OD, PN-10 (SDR-11) IS-15801, 3-layer (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) having thermal stability for hot & cold water supply with and including all necessary PPR plain and brass threaded fittings, laid in trenches complete all as specified & directed. (Make: Reliance/Finolex/Savoir faire manufacturing Co. Ltd/KPT) (NOTE:- Contractor shall give 7 years warranty certificate of any manufacturing defect and leak proof material & 50 years product life certificate will be submited before RAR process.)
Ditto all as per item No. 63.00 here-in-before but for 90 mm dia.
Ditto all as per item No. 63.00 here-in-before but for 63 mm dia.
Ditto all as per item No. 63.00 here-in-before but for 40 mm dia.
Labour only for refixing 15mm bore steel water tubing medium grade galvanised with new fitting laid in trenches/wall obtained from item No.49.00 here-in-before all as directed.
Ditto all as per item No. 67.00 here-in-before but for 20 mm dia obtained from item No.50.00 here-in-before
Ditto all as per item No. 67.00 here-in-before but for 25 mm dia obtained from item No.51.00 here-in-before.
Ditto all as per item No. 67.00 here-in-before but for 40 mm dia obtained from item No.52.00 here-in-before.
Ditto all as per item No. 67.00 here-in-before but for 50 mm dia obtained from item No.53.00 here-in-before.
Ditto all as per item No. 67.00 here-in-before but for 80 mm dia obtained from item No.54.00 here-in-before.
Ditto all as per item No. 67.00 here-in-before but for 100 mm dia obtained from item No.55.00 here-in-before.
Taking down unserviceable CI sluice valve 80 mm dia complete all as directed.
Taking down unserviceable CI sluice valve 100 mm dia complete all as directed.
S&F sluice valve cast iron 80 mm bore confirming to IS : 14846 both end flanged with S/S spindle with nut class PN - 1.0 ISI marked complete with hand wheel nuts, bolts, washers & rubber gusket etc for the sizescomplete all as specified & directed. (Make- Upadhya/Venus/Hazra/Kirloskar)
Ditto all as per item no. 76.00 here-in-before but 100 mm bore
Cutting out existing CI/CI pipe line of any size, insetrting tee or tee reducer including necssary lead joint-03 nos complete all as directed.
M&L for construction of brick masonry valve pit of size 1200x1200x900mm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, and 15mm thick rendering in cement mortor (1:4) internally, externally up to 15cm below GL, providing valve pit cover made of 3 mm thick MS sheet/plate, welded with 40 X 40 X 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embeded in PCC 1:2:4 type B-1 (20mm graded aggregate) block of size 230 x 200 x 100mm and provision of hinges, handle and locking arrangement including two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer and necessary excavation and earth work in soft/loose soil including dismantling of existing valve pit complete all as specified & directed.
Taking down unserviceable gate valve 20mm, 25mm, 40 mm & 50mm dia complete all as directed.
S&F Gun metal gate valve 20 mm bore Cast Copper alloy, screwed down high pressure with Crutch or Butterfly handle screwed both ends for iron pipe complete all as specified and directed.
Ditto all as per item no. 81.00 here-in-before but 25mm bore
Ditto all as per item no. 81.00 here-in-before but 40mm bore
Ditto all as per item no. 81.00 here-in-before but 50mm bore
Taking down unserviceable float valve from PVC Tank with fittings of size 20/25 mm complete all as directed.
S&F float valve with complete fittings for PVC Tank of dia 20 mm all as directed.
S&F float valve with complete fittings for PVC Tank of dia 25 mm all as directed.
(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 44980.00 (refer Tender Srl Page No 35). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
M/S G D CONSTRUCTION
NAYAK BROTHERS
SHRI S K BHATTACHARJEE
M/S CONTRACTS
ROY CONSTRUCTION
M/S DUTTA CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .