Replacement of 3 Nos. 35 HP Horizontal motors with pump and 1 No. 20 HP Horizontal motor with Pump in subsidiary pumping station near FF Block at Nangal Township

Amount

Dismantling/Removing of 20/35 HP Horizontal motors with pump with control pane in all respect. (MR)

Supply, Erection, Testing and Commissioning of pull back type centrifugal pump confirming to IS-5120/1977 with latest amendment if any having discharge of 252 m3/hr. against minimum head of 20 mtr. coupled with 35 HP 3 phase electric motor with 1450 RPM confirming for IS-325/1976 with latest amendment if any on a common base frame, complete with all accessories along with control panel. (MR)

Supply, Erection, Testing and Commissioning of pull back type centrifugal pump confirming to IS-5120/1977 with latest amendment if any having discharge of 115 m3/hr against minimum head of 20 mtr. coupled with 20 HP 3 phase electric motor with 1450 RPM confirming for IS-325/1976 with latest amendment if any on a common base frame, complete with all accessories along with control panel. (MR)

Dismantling concrete (e) Reinforced cement concrete (CSR Item No. 8.6 (e))

Reinforced cement concrete M-20mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth (CSR Item No. 10.15)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) (CSR Item No. 9.1)

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position (c) Tees angles & channels (CSR Item No. 18.1 (c.))

Nuts & Bolts of all sizes and length required (CSR Item No. 18.15)

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. (CSR Item No. 18.18)

C.I. Reducer 100 x 150mm 3' (Havey Duty) (MR)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B. Class PN-1.6 as per ISI (d) 200mm i/d Sluice Valves flanged (CSR Item No. 28.27 B (d) )

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B. Class PN-1.6 as per ISI (e) 250mm i/d Sluice Valves flanged (CSR Item No. 28.27 B (e) )

Supply and erection of Switch Disconnector Fuse Unit with HRC Fuses (Suitable for DIN HRC Fuses) in sheet enclosure on the existing surface Confirms to IS 13947 (Part-III), IEC 60947- 3 complete with G.I. Bolts, Nuts & Connections on both sides of switch with suitable size of thimbles, including cost of DIN HRC fuses as per PWD General Specifications:- (iii) SDF TP&N 100Amp., 415volts (With Sheet Enclosure) (CSR Item No. 34.21 B (iii))

PVC INSULATED FR COPPER CONDUCTOR CABLES - Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (vi) Overall size 10sq.mm (Un-sheathed) (CSR Item No. 34.09 (vi))

P/F of automatic Star-Delta Starter 35 HP (MR)

P/F of automatic Star-Delta Starter 20 HP (MR)

Voltmeter 440 volt (MR)

Amperemeter 200 Ampere (MR)

Bidder Name

Amount in Words

BIROKE BUILDERS PVT LTD

ANMOL KATYAL CONTRACTOR

Vijay Kumar C/O Vasudeva Electricals

Vijay Kumar C/O Vasudeva Electricals

BIROKE BUILDERS PVT LTD