Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-AOC 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹13.9 L+₹1.2 L (9.43%)Rejected-Finance | L2 | Rejected-Finance Awarded being 2nd Lowest Bidder | |
| 3 | L3₹15.9 L+₹3.2 L (25.0%)Rejected-Finance 64 SHAHEED UDHAM SINGH MARKET NEAR OLD BUS STAND BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Awarded being 3rd Lowest Bidder | |
| 4 | L4₹17.3 L+₹4.5 L (35.4%)Rejected-Finance 18969 A 1 SHRI GURU TEG BAHADUR NAGAR BIBIWALA ROAD STREET NO 15 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Awarded being 4th Lowest Bidder | |
| 5 | L5₹20.2 L+₹7.5 L (58.9%)Rejected-Finance | L5 | Rejected-Finance Awarded being 5th Lowest Bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Niranjan Lal EE GE(S) Bathinda
GE(S)BATHINDA BATHINDA MIL STN
GE(S) BTD TOKEN NO 33 OF 2022-23 CERTAIN BR REPAIRS AND MISC WORKS IN BLDGS OF OTM ACCN IN SECTOR II OTM ACCN IN AGE BR II UNDER GARRISON ENGINEER (SOUTH) AT MILITARY STATION BATHINDA
2022_MES_542885_1
GE(S)/BTD/TOKEN NO 33/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE(S)BATHINDA
Class E
Category a(i)
11 documents required · 11 mandatory
₹500
GE(S)BATHINDA
₹50,000
Yes
22 Oct 2022
3 Aug 2022
2 Sept 2022
3 Aug 2022
31 Aug 2022
17 Aug 2022
60 days
Amount
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and as directed.
Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2020) and all as shown on drawing of SSR Part-II (2020) complete all as specified and directed .
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156. complete all as specified and as directed.
Supply and fixing 100mm long (ISI Marked) extruded aluminium anodised butt hinges with galvanised mild steel screws complete all as specified and as directed .
S&F 150 mm long (ISI marked) aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed .
S&F 125 mm long, aluminium anodised handles, cast type, (ISI marked) complete all as specified and as directed .
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified and directed. (thickness of steel sheet shall be 1.25mm) Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified and directed (thickness of steel sheet shall be 1.25mm) Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.
M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.
S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I) complete all as specified and directed.
Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. Note - Wire gauze / glass to be measured and paid separately
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm when open) complete all as specified and as directed.
Material and Labour two coats of synthetic enamel paint over a coat of pink primer for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with including preparation of surfaces complete all as specified and as directed.
S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.
S&F in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified
S & F in (fixing with screws or welding as per site requirement) 300mm mild steel ordinary rat tail rod springs (Helical Springs), including roller & roller plate complete all as specified and directed.
Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and directed.
Supply and fixing 200 mm long, mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified
Supply and fixing 150 mm long, mild steel pressed handles, oval type, stove enamelled black (ISI marked) complete all as specified and as directed
S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F Factory made steel windows with side hung shutters including Box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.
Supply and fixing steel windows / ventilator for industrial buildings, fixed type, with glazing bars including taking down old windows complete all as specified and as directed .
Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.
S & F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.
S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified.
Material and Labour for applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and complete all as specified and directed.
Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:4 complete all as specified and as directed .
Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.
Material and labour Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, size of tile 600x 600x10mm thick,on over and including 15mm thick screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
Description all as per Ser item No 32 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and as direcetd.
Material and labour cement concrete tiles 25cmx25cm x 22mm thick, machine pressed; set,jointed and pointed in neat cement slurry in floors,and cut and polished. with grey cement and no pigments over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Demolition of cement concrete (unreinforced) including tiles of any description etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and incl 15mm thick screed bed in in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed.
Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 20-25mm thick over 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for Kota stone slab minimum size 450 mm x 300 mm, 20 to 25 mm thick in riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white cement paste pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and directed.
Supply and fixing in repair bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .
Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .
Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed .
S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed.
Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.
Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed.
Supply and fixing in repair stainless steel, 1mm thick Chromium plated, decorative type, soap dish holder fixed to wall with Chromium plated brass screwes including plastic gutties complete all as specified and directed .
S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed .
M&L for 32mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection complete all as specified and directed.
Supply and fixing 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .
Supply and fixing 20mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .
Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.
S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.
S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.
S&F in repair PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.
Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and as directed .
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
S & F 100mm bore cast iron sand cast soil waste and vent pipe with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.
S & F 75mm bore cast iron sand cast soil waste and vent pipe with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.
S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.
Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound as per manufacture instructions complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M & L for applying two coats of oil bound distemper over a coat of suitable primer over in including preparation of new plastered surafaces of walls and complete all as per manufacturer instructions complete all as specified and directed.
Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.
Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.
M&L for applying two coats of cement base paint with spray machine and making good by roller if required over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc including prepration of new surface complete all as specified and as directed.
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.
M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.
Cleaning of water tanks exceeding 250 ltr and not exceeding 500 ltr capacity including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, incl taking down and refixing if required etc. complete all as specified and directed
Dismantling existing broken unserviceable PVC tank of capacity 1000 Ltrs.
Supply and fixing three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs.
Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
Supply and fixing in ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.
Supply and fixing in repair 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .
Supply and fixing in repair 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed.
S & F 595x595mmx6mm thick Gypsum board laminated with PVC Sheet as in false ceiling including supply and fixing 'Tee" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer's instruction complete all as specified and directed.
S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including PVC beading on edges & top etc as per specifications complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.
S&F 5mm thick PVC sheet in strips and channel feathered at the edges for fixing on wall panelling inclusive of solvent cement fixing at site complete all as specified and directed.
S&F Hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site all as per specification complete all as specified and directed.
S & F Powder coated aluminium frame for windows with one or more rebate including making holes and providing packing(plastic sleves to hold bar within frame) for MS guard bars within the frame (from end to end), including cleat for fixing etc ccomplete all as specified and directed and shown in drawing.
S & F Powder coated aluminium window and ventilator shutters( sash and wire gauge shutter), top hung/side hung type, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws, powder coated aluminium fittings such as hinge type B-21 100mm long (2 Nos), suitable handle (1 No), tower bolt 100mm (2 Nos), stay (1 No ) for side hung shtter and 2 spring latches for top hung shutters each, complete all as specified and directed. and shown in drawing.
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
M & L sheet glass ordinary quality 5 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed.
Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed.
S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.
S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.
S&F in repairs tank nipple of suitable size at required on ground complete all as specified and directed.
S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed.
S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.
S & F in repair PVC connection 15 mm size with brass nuts of length 600 mm of approved quality
S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed.
S&F in repair flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed.
S & F in repairs CP grating (with or without waste hole), 125/150 mm size, fixed on floor/nahani traps etc complete all as specified and directed.
S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed.
S&F in repair for aluminium sliding door bolt 250 mm long stove enamelled black with bright bolt etc complete all as specified and directed.
S & F in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing in repair 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.
S&F in repair for MS tower bolt 200 mm long stove enamelled black with bright bolt complete all as specified and directed.
S&F in repair for MS pressed handles, oval type stove enamelled black 150 mm long complete all as specified and directed.
S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.
S & F in repair hasp & staple 100mm size, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repairs mild steel handles suitable for steel windows/ ventilators complete all as specified and directed.
Taking down rolling shutter of size not exceeding 10 Sqm each from any position, any location including fittings and fixtures. Repairing / Replacing of unserviceable components and re-fixing on same opening in its original positing after complete overhauing, greasing and oiling for smooth function and apply one coat of synthetic enamel paint complete all as specified and directed . Note:- Unserviceable/ parts under this item shall be measured & paid as supply only separately under appropriate items of this BOQ.
Supply only safety lever locks of size 150mm mild steel with 4 levers with two keys for rolling shutters approved/ best quality complete all as specified and directed .
Supply only ball bearing for rolling shutter to match the existing complete all as specified and directed .
Supply only steel helical wire or flat spiral spring for rolling shutters to pull out the shutters including proper greasing for smooth movements/ function complete all as specified and directed .
Supply & fixing in replacement 0.8mm thick plain black mild steel sheeting for cover hood of rolling shutter made channel or semi round shape including two coats of synthetic enamel pain over one coat of red oxide primer internal or external surface complete all as specified and directed .
Supply only MS pulley / wheel made with flat iron 25 x 6 mm of 160mm dia for revolving of rolling shutter in shaft complete all as specified and directed .
Dismantling old asbestos cement, corrugated or semi-corrugated sheets in roof covering complete all as specified and as directed.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240, complete all as specified and directed.
Demolition of bricks laid flat or on edge or brick tiles laid dry or laid dry and pointed in floors etc complete all as specified and directed.
M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed..
M&L for 60mm thick machine pressed precast concrete interlocking paver blocks any tiles any size and shape factory casted with grey cement and pigment and conforming to IS 15658-2006 of M-35 Grade and joints filled over and including 25mm thick sand filling with sand complete etc complete all as specified and directed.
M&L Precast cement concrete type B-1 (1:2:4) as in kerb stone set in CM 1:4 incl necessary moulds / forms work etc complete all as specified and directed.
Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
ABHINANDAN ENTERPRISES
M/s PANKAJ KUMAR
SHARDA ENTERPRIES
B D BATRA AND SONS
M/s Kamal Constructions
M/S VIAJY BUILDERS & DEVELOPERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .