ADDN/ALTN/IMPROVEMENT TO CERTAIN SMQs AT HQ TC (U) UNDER GE (AF) BANGALORE

Amount

Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site all as specified and directed.

Taking down of chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each all as specified and directed.

S & F for 2nd class HW plain chowkhats and framed,rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed

S & F for Pressed steel Size of frame 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied, fixed, and directed

S & F for Pressed steel Size of frame 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied, fixed, and directed

S & F for 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing and all as specified and directed.

S&F in for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and all as specified and directed.

M& L for mild steel gauzed shutter made out of Rectangular tube Main fram size (50mm x 25mm x 3mm ) and 8mm MS Square guard bar top and bottom with stainless steel fly proof wire mesh having stainless steel 0.50mm nominal dia wire and 1.20mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note : Mild Steel door Painting will be done by spray Gun ).

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed.

S&F for Powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F for Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.( Note : sheet Glass and SS wiremesh shall be measured & paid separately). .

M & L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 height all as specified and directed.

S & F for 18 mm thick veneered decorative plywood, grade 1( with BWR resin), with decorative faqce veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc all as specified and as directed.

S & F 30 mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvasised all as specified and as directed.

S & F Stainless steel clip on auto closing panel concealed hinges thickness 15-22 mm for full overlay door 0 degree crank for cupboard door all as specified and as directed.

S & F for Brass Godrej Mortice lock, vertical type, size 100 mm 4 levers include for escutcheon plates and two keys in repairs all as specified and as directed.

S&F for 100mm long magnetic catch all as specified and directed.

S & F 100 mm long Extruded brass handles, fabricated type polished all as specified and as directed.

S & F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed.

S & F for 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed.

S & F for 100 mm long Mortice latch with two levers (vertical type), brass body and fixed all as specified and as directed.

S & F for 150 mm long Extruded brass handles, fabricated type polished all as specified and as directed.

S & F for 75mm Stainless steel butt hinges, medium weight, and fixed all as specified and as directed.

S & F for 100mm Stainless steel butt hinges, medium weight, and fixed all as specified and as directed.

S & F for 150 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed all as specified and as directed.

S & F for 200 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed all as specified and as directed.

S & F for 300 mm size mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F for Floor door stopper of aluminium alloy body and tongue Overall length of cover plate 140mm long , anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F in repairs Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets with suitable woodenround base and fency type end top matching to curtain rod of make as approved by GE all as specified and as directed. [ Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same ]

M & L for along the external wall below concrete or masonry spron using chemecal emulsion @ 2.25 ltrs per liners metre incl drilling and plugging holes etc in apron all as specified and as directed.

M & L treatment of soil under existing floors using emulsion @ one lts per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortor 1:2 (1cement : 2sand) to match the existing floors all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1: 6 , complete all as specified and directed.

Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in (!:6)CM complete all as specified and directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1: 6 , complete in walls all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions and as directed.(WPC shall be measured & paid separately).

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement. all as specified and directed.

M&L fo Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement all as specified and directed.

Supply only liquid water proofing compound of approved quality. (Make : CICCO NO.1/SIKA/ACCO PROOF) all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying through mechanical means Two coats of oil bound distemper over a coat of primer over and including applying1 mm thickness plaster of paris putty to prepair the surface even and smooth as specified and directed.using roller for painting complete all as specified & directed.

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means Two coats of oil bound distemper over a coat of primer over and including applying 1 mm thickness JK Wall putty to prepair the surface even and smooth as specified and directed.

M&L for preparing new plastered ceiling surfaces of applying through mechanical means Two coats of oil bound distemper over a coat of primer over and including applying 1 mm thickness JK wall putty to prepair the surface even and smooth as specified and directed.

M&L for complete removal of existing treatment of old plastered ceiling surfaces of applying through mechanical means Two coats of oil bound distemper over a coat of primer over and including applying 1 mm thickness JK wall putty to prepair the surface even and smooth as specified and directed.

M & L Preparation new plastered surface of wall by applying 1 mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified & directed.

M & L Preparation of Complete removal of existing treatment plastered old surface of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified & directed.using roller for painting complete all as specified & directed.

M & L for Preparation External unplastered stone wall surface washing ,rubbing down, dust Cleaning and applying Two Coat of Acrylic exterior paint over and including one coat of Primer with alkali-resistance priming paint by mechanical means complete all as specified and directed.using roller for painting complete all as specified & directed.

M&L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer.complete all as specified & directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied priming. all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match all as specified and as directed.

M&L for Coloured Glazed ceramic design tiles 350x 250x 7mm/ 450X 350X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) all as specified and as directed.

M & L for Granite (of any type) tiles 18-20 mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in flooring and landings of stair case, treads including cutting and polishing of tiles and 20 mm thick screed bed of cement morter (1:6) complete all as specified and as directed.

ditto as above but vertical surfaces with 10 mm thick rendering of cement morter (1:4) complete all as specified and as directed.

M&l for rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations all as specified and as directed.

Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 450mm long 32mm dia GI pipe medium grade, (for draining out the water) all as directed. Note 1 : Fill the sunken with water and check for dampness and seepage . All pipes passing through walls of sunken floor shall be laid before water proofing treatment is carried out . One No 50 mm dia, 35 mm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken portion.Cost of pipe with including of quoted rate , no extra cost Shall be paid) Note 2: The work shall be carried out complete as per manufacture's specifications and application methodology. Execution to be done with authorized trained/skilled applicator with prior experience of more than 5 years in applying similar system and as per manufacturer technical guidelines laid by manufacturer,

Taking down rain water pipes including all fittings any size and pattern. upto 10th storey floors all as specified and as directed.

M&L for 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and as directed.

M&L for 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and as directed.

M&L for 150 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rainwater pipe all as specified and as directed.

S & F for 75 mm dia.,PVC Bends with access door all as specified and directed

S & F for 110 mm dia., PVC Bends with access doorall as specified and directed

S & F for 150 mm dia., PVC Bends with access doorall as specified and directed

S&F for 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door all as specified and as directed.

S&F for 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. all as specified and as directed.

S & F for 110 mm dia.,vent cowl in repairs all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and as directed..

Taking up or down steel tubing and connection 20mm bore pipe and removing from site. complete all as specified and as directed.

Taking up or down steel tubing and connection 25 mm bore pipe and removing from site. complete all as specified and as directed.

S&F for 15mm dia bore medium grade GI tubing and including all fitting ie elbow, Tee, union , tank nipple ,Coupling,etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F for 20mm dia bore medium grade GI tubing and including all fitting ie elbow, Tee, union , tank nipple ,Coupling,etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F for 25mm dia bore medium grade GI tubing and including all fitting ie elbow, Tee, union , tank nipple ,Coupling,etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc l0cm girth in brick walls complete all as specified and as directed.

Dismantling PVC water 500 ltr tanks and removing to store etc.complete all as specified and as directed.

S&F for White colour triple layer rotational moulded polyethene water storage tank (1000 ltrs capacity). ( cylinderical verticle with closed top) hoisted and fixed in position all as specified and directed in SSR Part-I.

S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 455 gms) all as specified and as directed.

S&F in repair gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore all as specified and as directed.

S&F in repair gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore all as specified and as directed.

S & F for Corner Glass Shelf, Fancy Type complete all as complete all as specified and as directed.

S & F for 15mm dia fancy type CP 2 way bib cock with wall flanges fixed as in repair all as specified.

S & F in repairs 15 mm bore chromium plated fancy type long body bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S & F in repairs fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repairs fancy type 15 mm bore angle stop valves, chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and as directed.

S&F in repair angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe all as specified and as directed.

S & F in repairs PVC connection 15mm size 450mmlong with CP PTMT nuts all as specified and directed.

S & F for Brass chromium plated tubular towell rail 20 mm dia , D type , 600mm long between flanges fixed with & incl chromium plated brass screws and wooden /plastic cleats all as specified and as directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.with Padestel complete all as specified and directed.

S&F in repairs standard PVC waste pipe 32mm dia.,complete for WHB all as specified and as directed.

S&F in repairs PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe all as specified and directed.

S & F for 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed.

S&F for 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms all as specified and as directed.

S & F for Single lever cast copper alloy, chromoum plated HOT and COLD 15 mm dia Fancy type Wall Mixer complete all as specified and directed.

S&F for fancy type wall mount SS-304 premium grade stainless steel soap holder/stand size 11.5(l) x 8.5(b) x 5.5(h) cm fixed with and including Chromium plated brass screws and wooden/plastic cleats.all as specified and directed.

S&F CP health faucet including one mtr length SS conncting pipe all as specified of Make: jaguar or equivalent fixed in repairs all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and as directed.

S & F in repairs Stainless steel kitchen plate rack of size 750mm x 600mm x 250mm, made of 1mm thick stainless steel sheet complete all as specified and directed. [Make: Prayag/ Nirali/ Jayna/ Neelkant]

S & F in repair Vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with trap set and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) all as specified and as directed.

Material & Labour for 50mm thick average thickness of PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) all as specified and directed.

Supply only liquid water proofing compound all as specified and as directed.

Waterproofing Membrane:-Providing and laying/ fixing TPO membrane of non-flammable waterproofing of roof which shall be a 1.5mm thick loose laid membrane using Fosroc Proofex ORG(I) membrane or equivalent layers are overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the rolls either end are overlapped with 110mm are in staggered position and the membrane shell be laid over the layers of nonwoven geotextile fiber or Asian paint TPO or equivalent product of M/s MC Bauchemic/CIPY/SIKA/Pidilite/Dr Fixit TPO membrane. The separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc proofex ORG(I) membrane and the concrete substructure.The termination of Foroc Proofex ORG(I) by aluminum strip anchoring complete all as specified and as directed. Note:- Work shall be carried out complete as per manufacturers specifications and application methodology . Execution to be done with authorized trained /skilled applicator with prior experience of more than 5 years in applying similar system and as per manufacturer technical guidelines laid by manufacturer, company back gaurantee to be given by contractor after completion of water proofing work before payment.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work all as specified and as directed.

Remove of plants/ bushes with roots from wall and concrete surfaces and applying herbicide 2,4-Dichlorophenoxyacetic acid as require and make the disturbed area with PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) or Cement morter 1:4 all as specified and directed

Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of defence area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination all as specified and as directed.

M&L for Plain Cement Concrete Type B0 , 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast ,bed plates ,filling hollow section of pressed steel frame and the like including use and waste of form work,weathering, slightly rounded or chamfered angles and throating as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) all as specified and as directed.

M&L for PCC type C2 ,1:3:6 (Using 40 mm graded stone aggregate) as in surface channels and drain all as specified and directed..

M&L for Forming Contraction (Dummy) joints 75mm deep x 10mm wide,filled with sealing compound, grade 'A' all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) all as specified and as directed.

M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface all as specified and directed

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc all as specified and as directed.

S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

ditto as per item no 122 but 6 to 8 mm dia complete all as specified and directed.

M&L 20-22 mm thick machine cut pre-polished kota stone slab flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab over & including 15mm thick screed or bedding in cement mortar 1:6, including grinding, rubbing and polishing complete all as specified and directed.

M&L 20-22 mm thick machine cut pre-polished kota stone slab as in skirting, riser of steps in full length in single piece without joint with groove cutting in double line of stair width, bullnosed ends, laid over and including 10mm thick screed or bedding in cement mortar 1:4 fixed with grey cement slurry, complete all as specified and directed.

Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in,including spreading, levelling ,watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Material and labour for sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover ,punning of sand using suitable T&P as per site requirement complete all as specified and directed. Note- Punned thickness of sand i.e 18cm to be consider for measurement purpose.

Supplying and laying un-reinforced precast concrets cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed.

Material & Labour for plain cement concrete 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in benching,coping including weathering slightly rounded or chamfered angles or as per site requirement with necessary plastering work complete all as specified and directed.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 50 sqmm 3.5 core complete all as specified and directed.

Material and labour for 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including clamps, nut bolt and washers and taking out old rusted pipe complete all as specified & directed.

M& L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light, fan,socket or power) complete, including fittings & fixtures such as switches, sockets,ceiling rose, pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good to disturbed surfaces with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed.

Taking down carefully ceiling fan from ceiling, painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and refixing of ceiling fan in same position in serviceable condition including provision of three core 1.5 sq mm cable from ceiling rose to fan connector complete all as specified & directed.

Taking down carefully any size/any sweep Exhaust fan from wall, cleaning all dust ,oil etc. and refixing of exhaust fan in same position in serviceable condition including nut ,bolt,washer including provision of three core 1.5 sq mm cable from ceiling rose to exhaust fan complete all as specified & directed.

Taking down carefully geyser of capacity 50/25 Ltr from wall, painting of geyser complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and refixing the geyser of capacity 50/25 Ltr after repair in new position including drilling holes in any type wall fixing four nos anchor bolts five inch size,nuts and washer and connected to water pipe line with two nos hot and cold 600 mm long connection pipe and electric connection testing complete all as specified & directed.

Taking down carefully the electric meters from meter board and servicing/ overhauling of Electric energy meters of any size/ any capacity including testing of meters for running properly and accuracy including load testing with proper equipments and refixing the same including connecting up and provision of cable complete all as specified & directed.

M&L for concealed point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls or any type wall /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed for the following :- Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and modular sunken boxes included in quoted rate. No extra payment will be made for this. One light point controlled by one single pole 5 Amps switch.

One ceiling fan point controlled by one single pole 5 Amps switch all as specified and as directed.

One exhaust fan point controlled by one single pole 5 Amps switch all as specified and as directed.

One 5 pin socket point 5 Amps on independent board all as specified and as directed.

One 5 pin socket point 5 Amps on same board with other switches all as specified and as directed.

One bell/buzzeer point controlled by one push button 5 Amps switch on independent board all as specified and as directed.

One light point contro lled by two 2-way switches, with cables 1.5 sq. mm size all as specified and as directed.

M&L for concealed point wiring with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls or any type wall /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc for One 15 Amp switch socket combination on independent board complete all as specified & directed. (Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and sunken boxes included in quoted rate. No extra payment will be made for this.

M&L for concealed point wiring with 4 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls or any type wall /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 4 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc for One 15Amp switch socket combination on independent board complete all as specified & directed. (Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and sunken boxes included in quoted rate. No extra payment will be made for this.

Supply and fixing Modular switch , 1 Module single pole one way 10 Amps. all as specified and as directed.

Supply and fixing modular socket , 2 Module 6 Amps, 5 pin, 240 volts AC. all as specified and as directed.

Supply and fixing Modular switch , 1 Module single pole one way 16 Amps. all as specified and as directed.

Supply and fix modular socket , 2 Module 6/16 Amps, 6 pin, 240 volts AC. all as specified and as directed.

Supply and fixing of modular type fan regulator 2 module upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm. all as specified and as directed.

Supply and fixing of modular type Bell push 6 A, 1 Module all as specified and as directed.

Supply and fixing of Ding Dong Bell, AC, 230 volts, Single Pole. all as specified and as directed.

Supply and fixing Modular switch , 1 Module single pole two way 10 Amps. all as specified and as directed.

Supply and fixing of modular white cover plate with frame, 1 module. all as specified and as directed.

Supply and fixing of modular white cover plate with frame, 2 module. all as specified and as directed.

Supply and fixing of modular white cover plate with frame, 3 module. all as specified and as directed.

Supply and fixing of modular white cover plate with frame, 4module. all as specified and as directed.

Supply and fixing of modular white cover plate with frame, 6 module. all as specified and as directed.

Supply and fixing of modular white cover plate with frame, 8 module. all as specified and as directed.

Supply and fixing of modular metal flush box 1/2 module. all as specified and as directed.

Supply and fixing of modular metal flush box 3 module. all as specified and as directed.

Supply and fixing of modular metal flush box 4module. all as specified and as directed.

Supply and fixing of modular metal flush box 6 module. all as specified and as directed.

Supply and fixing of modular metal flush box 8 module. all as specified and as directed.

Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals complete all as specified & directed.

Supply and fixing LED Light fitting, 4 feet 1x20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

Supply and fixing LED mirror Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

Supply and fixing LED light fitting 9/ 10 Watts bulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

M&L for concealed sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge. Note- (i) Two run of single core 2.5 sqmm cable and one run 2.5 sqmm earth wire including PVC concealed Conduit together will be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M&L for concealed sub main wiring with two single core 4 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 4 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Note- (i) Two run of single core 4sqmm cable and one run 4 sqmm earth wire including PVC concealed Conduit together will be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M&L for concealed sub main wiring with two single core 6 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 6 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Note- (i) Two run of single core 6sqmm cable and one run 6 sqmm earth wire including PVC concealed Conduit together will be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed. Note: (i) The unit rate includes 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate includesgalvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

Supply & fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire. all as specified and as directed.

Supply & fixing of Sheet metal enclosure for DB's double door TPN 04 ways including MCCB 125 Amp and it to be used as incomer and outgoing as MCB single pole with 200 Amps rated copper bus bar 415 V, complete all as specified & directed.

Supply & fixing MCCB, 4 poles 415 Volts, 125 Amps, 16 kA, 50 Hz, AC, fixed thermal and fixed magnetic type with suitable size lugs and testing complete all as specified & directed.

Supply & fixing Sheet metal enclosure for DB's double door SPN, 12 ways when MCBs to be used single pole and neutral, with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed.

Supply & fixing testing and commissioning MCB SPN, 40 to 63 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed.

Supply & fixing testing and commissioning MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified & directed.

Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 32 Amps complete all as specified & directed.

supply and fixing factory made uPVC white colourfixed g Fixed Louvered Ventilator made out of multi chambered uPVC sections with TPE gaskets having isolated drainage and reinforced with Galvanized Iron profiles through out the windown. The outer frame having a overall size of 60x60mm with reinforcement of 1 mm thickness and Mullion with overall size of 60x75mm with reinforcement of 1 mm thickness. Glazing bead for fixing of glass shall be of size 20x36mm. Ventilator shall be provided with 5 mm Pin Head glass,Wall thickness of frame Mullion shall be 2-2.2 mm with lead, lift, loading, unloading & HOM charges curing, complete & all other incedental charges required for succesful completion of work and as per directions of Engineer incharge of the work . Note 01: The unit rate quoted by contractor includes cost of glass,mesh and includes all other connected accessories. Net Opening will be measured for payment purpose). Note 02: uPVC frame and sash extruded profiles minus 5% tolerance in dimensioni ile. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account made. shall be Note 03: The rate quoted is inclusive of scaffold & safety measurers to be follow as per direction by Engr - in- Charge.

EURO ENTERPRISES (BID ID -3392447)

M/s BHOOMI ELECTRICALS (BID ID -3392012)

GKR and CO (BID ID -3388300)

VARGHESECHACKO AND CO (BID ID -3392107)

chowdeshwariconstructionco (BID ID -3392230)

G K CONSTRUCTIONS (BID ID -3392637)