STBT and Maintanance for 2 Years to Sawalde Sukwad Shindkheda Road SH-12 km.24/200 to 48/00 Tal.Shindkheda Dist.Dhule

Amount

Providing 50 millimetre (about 2) thick full grout bituminous road surface including supplying all materials, preparing the existing road surface, laying the required thickness of metal layer, heating and spraying bitumen, spreading chips, laying with seal coat @ 125 Kilogram / 100 square metre and Compacting etc. complete.(with Bulk asphalt 60/70 grade.)

Providing 50 millimetre (about 2) thick full grout bituminous road surface including supplying all materials, preparing the existing road surface, laying the required thickness of metal layer, heating and spraying bitumen, spreading chips, laying with seal coat @ 125 Kilogram / 100 square metre and Compacting etc. complete.(with Bulk asphalt 60/70 grade.) (with emulsion)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with ordinary / vibratory rollar to the required density. By spreading Manual Means Grading-I, a) (Using Screening Crushable type such as Murum or Gravel)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with ordinary / vibratory rollar to the required density. By spreading Manual Means Grading-II, a) (Using Screening Crushable type such as Murum or Gravel)

Providing and laying 75 millimetre thick built-up spray grout over existing Black Topped surface including thoroughly cleaning the water bound macadam surface by using mechanical broom or approved equipment, applying tack coat of at the rate of 0.5 Kilogram / Square Metre, spreading coarse aggregates at the rate of 0.05 Cubic Metre per Square Metre area and Compacting metal layer to desired degree of compaction so that the surface is uniform and free from deformities, applying binder bulk asphalt of 60/70 grade at the rate of 1.5 kilogram per square metre in uniform manner with the help of mechanical sprayer then spreading coarse aggregates of second layer at the rate of 0.05 Cubic Metre per Square Metre area and Compacting, applying binder bulk asphalt of 60/70 grade at the rate of 1.5 kilogram per square metre in uniform manner with the help of mechanical sprayer then spreading key aggregate at the rate of 0.013 cum/Square Metre. area immediately after second spray of binder and rolling untill the entire coarse is thoroughly compacted and key aggregates firmly in position etc. complete.

Providing and laying hot mix hot laid bituminous macadam 50/75 millimetre average thickness with 3.0% bitumen by weight of total mix for levelling course to remove irregularities / Base course including diversion of traffic supply of all materials, heating bitumen and chips in drum mix plant, cleaning the road surface, laying bituminous macadam by paver finisher including Compacting with power/ vibratory roller, (60/70) VG-30 grade of bitumen roller transportation and cost of all materials, bitumen from refinery etc. complete. (including tack coat).

Providing and Laying Open Grade Carpet 20 millimetre thickness composed of 13.2 millimetre to 5.6 millimetre aggregates premixed with bituminous binder transported to site , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction, with --------------------- @ the rate of 1.46 kilogram / square metre , including prime / tack coat of 0.5 kilogram /Square Metre. For Bitumen VG-30 bulk-30

Providing bituminous liquid seal coat to black top surface, including supplying all materials including all leads, preparing existing road surface, heating and applying bitumen (98.00 kilogram / 100 Square Metre), spreading chips and rolling complete (by using bulk asphalt) 1) Using Bulk Bitumen grade (60/70) VG-30

Supplying hard murum /kankar at the road site, including conveying and stacking complete.

Spreading hard murum, soft murum, gravel, sand for various works complete

Compacting the hard murum side widths layers on each side with power roller including artificial watering complete.

Cutting down the road side thorney bushes (Wedi Babhul, etc) including removing their roots, stacking and conveying the materials, removing vegetation including leveling the ground etc. complete as directed by Engineer in charge

Dressing of side shoulder including excavation, cutting shrubs and bushes, spreading the excavated stuff and sectioning to the required line, level and slope etc. complete.

Excavation for catch / side water gutter in strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. By Mechanical Means

Watering and compacting of embankment formed of materials obtained from the road cutting, within a lead of 50 meter, to 95% of standard proctor density after laying them in layers of 20 centimetre to 30 centimetre with power roller.

Providing earth work in embankment with approved materials obtained from departmental land or other sources upto lead of 50 meter including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grade and section, watering and compaction with vibratory roller with V-net attachment to achieve 95 % of standard proctor density complete

Providing rain cuts over side shoulder and making arrangement for surface drainage.

Providing and laying shoulder drain of trap rubble of 0.45 x 0.45 metre section at 450 angle including hand packing, filling vicids with sand and shingle of approved quality and ramming etc. complete as directed.

Providing and fixing P. cement concrete guard stone/indicator stones of standard size and shape (200 x 200 x 600 millimetre ) including fixing in ground and white washing etc. complete.

Providing and fixing Reinforced Cement Concrete 200 metre stones as per Indian Road Congress standard including painting lettering etc. complete.

Providing and fixing Reinforced Cement Concrete 5th Kilometer stones, on State Highway / Major District Road etc. including painting, numbering etc complete as per Indian Road Congress design for highway km. stones and fixing in std. size cement concrete 1:4:8 block complete.

Providing and fixing Reinforced Cement Concrete 1:2:4 ordinary Kilometer stones including painting numbering etc. complete for National Highway / State Highway / Major District Road etc. as per Indian Road Congress design for highway km stone and fixing in standard size cement concrete 1:4:8 block complete.

Providing white and colour washing to road side trees in two coats in 2 bands of white and one red band at centre of 30 centimetre height each including preparing the surface, cost of material, conveying etc. complete.

Providing excavator for demolition of encroachment as per instructions of Engineer in charge.

Excavation for foundation including shoring and strutting as necessary and disposing off excavated stuff as directed in earth, soils of all types, sand, gravel, soft murum etc. Complete. A) By Manual Means.

Providing and laying in situ Mix-10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary bailing out water, compacting and curing. (including formwork, centering.) (Cement 4.05 bags/Cubic Metre) with Concrete mixer. With crushed sand.

Providing, cutting, bending, hooking, tieing in position and laying Thermo Mechanically Treated FE 500 steel bar for reinforcement as per detailed drawings for all Reinforced Cement Concrete works. (Other Plants)

Providing and laying Mix-20 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 6.90 bags/Cubic Metre) with Concrete mixer. A)With natural sand

Providing and laying in situ Mix-20 Reinforced Cement Concrete of trap /granite / quartzite /gneiss metal for Reinforced Cement Concrete work,of ballast walls, kerbs, box returns etc. including scaffolding, compaction, formwork finishing and curing complete. (excluding reinforcement) (Cement 6.90 bags/Cubic Metre) with Concrete mixer. With natural sand.

Providing railing of mild steel angle post 2M center to center of section 75 millimetre x 75 millimetre x 10 millimetre or equivalent I/ channel section of height 1.225 above bridge surface with minimum anchor length of 30 centimetre including hold fast of 25 millimetre diametre Mild Steel bar welded at the bottom and concreting of 1:3:6 of size 30 centimetre x 30 centimetre x 30 centimetre with three rows of 40 millimetre B class Galvnised Iron pipe provided at equal distance including scaffolding and with one coat of anticorrosive paint and over it two coats of oil painting, curing of concrete etc. complete.

Providing Stone masonry work in cement mortar 1:3 with watering for substructure complete as per drawing and technical specifications. -- Coursed Rubble Masonry (first sort)

Painting on concrete surface (Providing and applying 2 coat of water based cement paint to un plastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying plaint of 1 litre for 2 Square meter)

Providing and laying Pitching on slopes laid over prepared filter media incusing boulders apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. -- Stone/Boulder

Painting with approved enamel paint in two coats including cleaning surface and lettering on masonry works with nalla flow direction, span number and location complete.

Providing cast in situ block of Mix-10 cement concrete for head wall of CD work and retaining wall with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing complete. With Concrete mixer . (Cement 4.05 bags/Cubic Metre) With natural sand.

Providing and casting in situ plain cement concrete Mix-15 of trap metal for coping to head walls/ parapet construced in UCR including centering, form work, compaction and curing etc. complete with Concrete mixer. With natural sand

Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing complete.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 millimetre thick including reflectorizing glass beads @ 250 gms per Square Metre area, thickness of 2.5 millimetre is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)

Providing and applying Thermo Plastic Reflective Paint of any color for 10 centimetre wide lane strips of 3 millimetre thick of pigment 10%, clean, dry and good road surface with 30- 40% glass beads, 20% binder and 40% of filler material etc. complete. (Note - Rate for actual area painted)

Providing and applying Thermo Plastic Reflective Paint of any color for 15 centimetre wide lane strips of 3 millimetre thick of pigment 10%, clean, dry and good road surface with 30- 40% glass beads, 20% binder and 40% of filler material etc. complete. (Note - Rate for actual area painted)

Providing and Fixing of Retro Reflectorised 300 x 900 millimetre Hazard sign boards of 3M or equivalent manufacturer as approved by engineer-in-charge, made out of retro reflective sheeting of micro prismatic grade conforming to IRC-67: 2012 and Type XI standards of ASTM D4956-09 specifications, fixed over 2 millimetre thick Al / 4 millimetre thick ACP sheet supported with Back support frame of 25x25x3 millimetre mild steel angle as approved , supported on a mild steel angle iron post 75 millimetre X 75 millimetre X 6 millimetre - 2.7 mtr height, firmly fixed to the ground by means of properly designed foundation with Mix-20 grade cement concrete 45 centimetre X 45 centimetre X 60 centimetre , 60 centimetre below ground level as per approved drawing. 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer and a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor Hazard Marker boards of 30 x 90 centimetre Rectangle.

Providing Vertical Delineator of 3M or equivalent manufacturer as approved by engineer-in-charge, having wide angle cube corner micro prismatic non metallic reflective sheeting confirming to Type XI of ASTM D4956 -09 with White Color and Red Color combination and having minimum of retro reflective ex posed area of 125 Sq centimetre on top slots and 35 Sq centimetre on bottom slots andno edges shall be exposed for tampering. This tubular delineator shall have a core and shell construction, shell shall be made of tough, high impact resistant, injectionmolded, thermoplastic outer body and the inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0 millimetre & core-shell structure shall be of height not less than 800 millimetre above the ground and width not less than 80 millimetre The metallic core of the delineator shall extend 300 millimetre beyond the shell length from bottom for installing in the ground. The extended portion shall have slots to insert anchoring rods for enhancing the concrete grip. The logo of the manufacturer shall be embossed on either side of the body in the injection molding process. The engineering thermoplastic used for making the delineator body shall have minimum initial mechanical properties of 600J/m tested in accordance with ASTM D256 and shall retain at least 70% of these minimum initial values when subjected to accelerated weathering for 1000hrs as per ASTM G155 or UL 746C and as per IRC 79 specifications and including fixing the unit in Mix-20 Grade Cement Concrete of Size 30x30x40 centimetre including excavation for pit. Vertical Delineators

Metal Beam Crash Barrier -- Type - B, THRIE : Metal Beam Crash Barrier (Providing and erecting a Thrie metal beam crash barrier comprising of 3 millimetre thick corrugated sheet metal beam rail, 85 centimetre above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 millimetre spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 millimetre , 546 millimetre long complete as per clause 810)

Supplying and Fixing of Molded Shank Raised Pavement Markers of 3M or equivalent manufacturer as approved by engineer-in-charge, made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kilogram tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 millimetre , 100 millimetre and 102 +/- 2 millimetre and with minimum reflective area of 13 Sq centimetre on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diametre not less than 19 +/- 2 millimetre and height not less than 30+/- 2 millimetre ) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. Twin Shank RPM (Cat Eye)

Providing and fixing Road junction / Information sign board of size 1.8 m x 1.2 metre prepared on 16 gauge Mild Steel sheet with angle iron frame of size 35 x 35 x 3 millimetre with cross bracing of size 25 x 25 x 3 millimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 65 x 65 x 6 millimetre of 3.65 metre long inflated at bottom drilled on top with two numbers angle iron cross bracing for vertical angle post of size 50 x 50 x 5 millimetre of 2.35 mtr. long painted in white and black bands of 25 centimetre with 8 numbers high strength Galvnised Iron bolts and nuts of size 10 millimetre diametre and 20 millimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in-charge etc. complete.

Providing and fixing cautionary / warning sign board of size 60 centimetre having shape of equilateral triangle with apex point upwards. prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of Mild Steel Angle iron post of size 50 x 50 x 5 millimetre of 3.65 metre long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 25 centimetre fixing board and post with 2 numbers high strength Galvnised Iron bolts and nuts of size 10 millimetre diametre and 20 millimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in-charge etc.

Providing and fixing Mandatory / Regulatory sign board of circular shape of size 60 centimetre diametre prepared on 16 gauge Mild Steel sheet including painting with zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border, coated with non pealable crystal clear protective transparent coat retaining 100% relection including one number of Mild Steel Angle iron post of size 50 x 50 x 5 millimetre of 3.65 metre long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 25 centimetre fixing board and post with 2 numbers high strength Galvnised Iron bolts and nuts of size 10 millimetre diametre and 20 millimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in-charge etc. complete.

Providing and fixing N.H./ S.H. Route Marker size 60 centimetre x 45 centimetre with one No. direction plate of size 30 centimetre x 25 centimetre prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of Mild Steel Angle iron post of size 50 x 50 x 5 millimetre of 3.65 metre long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 25 centimetre fixing board and post with 4 numbers of high strength Galvnised Iron bolts and nuts of size 10 millimetre diametre and 20 millimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in-charge etc. complete.

Providing and Fixing of Retro Reflectorised 300 x 900 millimetre Hazard sign boards of 3M or equivalent manufacturer as approved by engineer-in-charge, made out of retro reflective sheeting of micro prismatic grade conforming to IRC-67: 2012 and Type XI standards of Amegen standard of testing material D4956-09 specifications, fixed over 2 millimetre thick Alluminium / 4 millimetre thick Asbestoes sheet supported with Back support frame of 25x25x3 millimetre mild steel angle as approved , supported on a mild steel angle iron post 75 millimetre X 75 millimetre X 6 millimetre - 2.7 mtr height, firmly fixed to the ground by means of properly designed foundation with Mix-20 grade cement concrete 45 centimetre X 45 centimetre X 60 centimetre , 60 centimetre below ground level as per approved drawing. 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer and a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor Hazard Marker boards of 30 x 90 centimetre Rectangle.

Quality Control Testing charges for construction material (As per general Note No.-7.1) a) Silt test

b) Gradation

c) Water absorption, Specific gravity, Impact value / Crushing value

d) Sieve Analysis

e) Abrasion Value

f) Flakiness index & Elongation index

g) Stripping value

h) Soundness

i) Bulk density

j) (Gradation) Sieve analysis

k) Plasticity Index Value

q) Standard consistancy Fineness, Specific Gravity, Setting (Initial & Final), Compressive Strength

r) Compressive Strength (Kilogram / Square meter)

Royalty charges

Krishna Enterprises