Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹46.1 L+₹2.7 L (6.33%)Rejected-Finance | L2 | Rejected-Finance Higher Bid value. | |
| 3 | L3₹46.3 L+₹2.9 L (6.68%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L3 | Rejected-Finance Higher Bid value. | |
| 4 | L4₹47.3 L+₹3.9 L (9.01%)Rejected-Finance | L4 | Rejected-Finance Higher Bid value. | |
| 5 | L5₹47.5 L+₹4.2 L (9.65%)Rejected-Finance | L5 | Rejected-Finance Higher Bid value. |
Tender Value
Refer Docs
EMD Value
₹84,600
Closing Date
2 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
PROVN OF PCC PATHWAY IN FRONT OF BLDG NO T241 TO T 128 RATION STORE AND VEG ROOM IN BLDG NO T64 HARDSTANDING INSIDE THE MT PARK NEAR BLDG NO T80 AT LOWER SWASTIK SEPTIC TANK FOR BLDG NO P24 MT LINE UNDER GE GANGTOK
2023_MES_627021_2
8141/A/E8
Open Tender
Miscellaneous Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents.
8 documents required · 8 mandatory
₹500
GE Gangtok
₹84,600
Yes
16 Mar 2024
21 Nov 2023
4 Dec 2023
21 Nov 2023
2 Dec 2023
23 Nov 2023
Amount
Dismantling plain or corrugated sheeting, any gauge, thickness all as specified.
Dismantling of wall and ceiling boards( fiber pulp insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillets all as specified.
Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work all as specified.
Demolition of PCC concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, and brushing neat cement slurry with 3.0kg of cement per sq. metre etc complete all as specified and as directed.
M&L screed bed or bedding layer of mortar 20 mm thick for laying (1:6) floor finishes etc all as specified.
M&L non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 for recive tile etc all as specified.
M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 even & smooth without using extra cement for recive tile etc all as specified.
M&L for 20 mm thick rendering in two layers 10 mm each in cement mortar (1:4) with using water proofing compound on stone masonry other than fair face of brickwork to be finished even and Smooth (without using extra lime or cement)
Supply only integral water proofing compound
M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match
M&L for prepartion of newly plastered surface wall surface and applying two coat oil bound distemper etc all as specified.
M&L for washing, rubbing down and stopping of distempered and painted old wall surface and applying two coat oil bound distemper etc all as specified.
M&L for prepartion of newly plastered surface wall surface and applying Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
M&L for Complete removal of existing treatment and applying Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
M&l for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm ixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
Supply and fix 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and directed by the Engr-in Charge.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.
M&L Mild steel rolled section as in main and cross beams ,hips, and jack rafters ,purlin where connected to common rafter and running rails and guides for slidding door fixed with a ngle cleats etc confiorming to Fe 410-W (Gde -250) including painted one shop coat of zinc primer paint (including preparation of surfaces) at contractors workshop before facbrication complete all as specified and directed.
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide completed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for second class hardwood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified supplied and fitted to chowkats.
M&L preparation of new untreated wooden surfaces of any description width or grith and applying two coats of synthetic enamel paint over one coat of pink primer .
S&F Mild steel butt hinges 100mm long, medium weight, cold rolled. complete all as specified and directed.
S&F Mild steel butt hinges 75mm long, medium weight, cold rolled. complete all as specified and directed.
S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.
S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised. complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts, 150 mm long, of extruded section. complete all as specified and directed.
S&F Extruded aluminium alloy handles 125mm long, fabricated type, anodised. complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts, 100 mm long, of extruded section. complete all as specified and directed.
S/F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed .
S/F for 3 mm thick Sheet glass,ordinary qualityand glazingwith oil putty in square n exc 0.5 sq. m in each panel complete all as specified and directed.
S&F for 500Liter rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified. Including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tub fixing in opening as per specification and drawing
S&F factory made solid panel PVC door shutter 30mm th (style) consisting of frame made out of MS tubes for top & bootom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rails on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the stiles & rails with suitable PVC sheet beading & joined together with solvent cement suppling & fixing in the frame at site as specification & drawing
M&L for hard core of gauge n.exc .63 mm deposited spead, levelled, watered well rammed toa uniform smooth surface n.exc 15 cm thick using broken stone or boulder complete all as specified and directed by the Engr-in-Charge.
M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in plinth protection, path etc 75 mm thick finishing surfaces even and smooth without using extra cement including construction joints at every 3 m interval and each coner and provition of mastic filling complete all as specified and directed by the Engr-in-Charge.
Supply and fixing fancy type CP 15 mm bore bib taps cast copper alloy with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified.
S&F for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by the Engr-in-Charge.
S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms)
S&F for vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified
S&F for PVC low level flushing cistern of 10 ltrs capacity action type white body with intel ball valve float handle bracket flush pipe etc complete and connecting to WC with PVC flushing pipe ( Make :- Paryware/Hindware/Cera) complete all as specified and directed by the Engr-in-Charge.
S&f for toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.
S&F stop valves fancy type 15 mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for pipe or for unions and fixed.
S/F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by the Engr-in-Charge.
S & F Brass chromium plated shower rose 125mm size
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store
Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weig ht 15mm-110gms) complete all as specified and directed by the Engr-in-Charge.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and directed.
M&L for 15 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors
M&L for 20 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors
S/F aluminium anodised alloy curtains road with fixing brackets , stops, roller etc complete all as specified and directed
S/F Wash basins, Vitreous China (flat back or angle back type) of size 630x450mm inlcuding matching pedastal fixed with and including cp brackets with complete fitting complete all as specified and directed by the Engr-in-Charge.
S/F for wall mixer with bend pipe with built in non return valve with all fittings complete all as specified and directed
S&F 08-10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixed including screws to steel/wooden frame work complete all as specified and as directed.
Excavation over areas, n. exc 1.5m deep and getting out soft/loose soil for septic tank etc
Excavation over areas for each additional 1.5m and part thereof in depth beyond the first 1.5m and getting out soft/loose soil for septic tank etc.
Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m in depth for foundation n.ext 10 sqmm on plan and not exc 1.5 mtr in depth and getting out in soft / loose soil etc all as specified.
Concrete bed to drain pipe of 150 m dia including packing under and haunching against the side of pipe after they are laid and tested in Cement concrete 1:3:6 Type C2 etc all as specified.
S & F PVC (SWR) pipe single socket 150mm bore laid in trenches and jointed is specified
S & F PVC (SWR) pipe single socket 110mm bore laid in trenches and jointed as specified
S&F PVC 110 mm dia PVC (SWR) vent cowl of any radius all as directed and specified by Engr-in- Charge
Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick in soft / loose soil
Removing excavated materials not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil
M&L PCC 1:4:8 type D-2 40mm graded aggt in foundation etc. complete all as specified and as directed.
M&L PCC 1:3:6 as Type C1 20mm graded aggt in benching of man hole etc complete all as specified and as directed.
M&L for precast RCC 1:2:4 type B1 20mm graded aggt manhole cover extra set in cement mortar 1:6 complete all as specified and as directed.
M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M&L for cement concrete type C2 1:3:6 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
Formwork for fair finishes to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick. complete all as specified and as directed.
Formwork for fair finishes to flat faces of walls, parapets and staircase etc in vertical or to batter etc complete all as specified and as directed.
M&L for Formwork for rough finishes to sides of flat concrete foundations footings etc complete all as specified and as directed.
M&L Formwork for rough finished surface of flat concrete walls ,floor and roofs n exc. 20cm wide and side of rcc etc complete all as specified and as directed.
M&L RCC 1:2:4 type B1 (20mm graded aggregate) (Nominal mix) as in slab/Beams complete all as specified and as directed.
M&L for reinforced cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in walls etc all as specified.
M&L for precast solid block massonary of 1:3:6 type C1 using 20 mm graded stone aggregate exe 10 CM width and setting in CM morter 1:6 complete all as specified and as directed.
Cutting into existing manholes for connecting new drain making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement mortar 1:2:4 types B-1 smooh finished and reforming benching are required.
Mild stell bar Fe 410 (Gde E250) quailty -- or Fe 290E-165) 16mm dia as in rungs
M&L for RR uncoursed well bonded beded and solidly hearted built in 1:6 CM all as specified.
Providing, cement concrete type C1 1:3:6 (20mm graded stone aggt) as in coping, rounded or chamfered on edges all as specified.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out soft/loose soil completed.
M/L for precast solid block massonary of 1:3:6 type C1 using 20 mm graded stone aggregate not exe 10 CM width and setting in CM morter 1:4
M&L for rendering 15mm thick on fair face of brick or concrete surfaces in cement mortar (1:4) finished even and smooth using without extra cement complete all as specified and directed
M&L for rendering 15mm thick on other than fair face of brick or concrete surfaces in cement mortar (1:4) finished even and smooth using without extra cement complete all as specified and directed
M&L for cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in intel,coping etc complete all as specified.
M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregare as in sub base of floor all as specified and as directed.
M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate finished and even as in floor all as specified and as directed.
M&L rolled section steel work in Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 -W (Gde- E- 250) quality- A completed.
S&F for Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts confomiing to Fe- 290 Gde-E-165 etc all as specified and as directed.
M&L for preparation of new steel surface of any description n exc 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide completed.
M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel.completed all as specified and as directed.
M/L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including formwork moulds mitres/stopped ends etc complete al specified and directed. ( Note:- add and deduct for each 25 mm girth por partof over or under 30 cm shall be considered in measurement calculation in MB.
Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto
Material & labour for Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors with grey cement and pigments over and incl 20mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster 1:4 all as specified and as directed.
M&L for prepartion of newely plastered surface on walls for two coat of cement base paint etc all as specified.
Supply & fix in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with necessary clamps,bolts etc.complete all as specified and as directed
M&L for PCC 150 mm thick 1:4:8 type D2 40mm stone aggt as in flooring all as specified and as directed.
M&L for Cement concrete 100mm thick Type B2 1:2:4 40mm graded stone aggt in flooring
M&L for plastic dividing strips, 1.5mm thick and 97 mm width on every 2m panel etc all as specified and as directed.
M&L cement concrete type C-2 1:3:6 (40mm graded aggregate) 75 mm thick in subase of floor Finished even and rough complete all as specified and as directed.
Surface dressing n.exc 15 cm deep getting out in soft/loose soil complete all as specified and as directed.
M&L Preparation of newly plastered surfaces of walls and applying Two coat of acrylic washable distemper on new surfaces of walls over wall care putty all as specified and directed.
M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed
M & L for TMT bars 5mm dia and over upto and incld 10mm dia as in stirrups, spacers and binders and binding with MS wire not less than 0.9mm dia (annealed) conforming to IS:1786, complete all as specified and as directed.
Material and labour for sand filling under floors including watering and consolidation complete all as specified and directed by the Engr-in-Charge.
Materials and labour for 100 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed by the Engr-in-Charge.
M&L for providing Machine cut kota stone slab,flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed complete all as specified and directed.
Material and labour for 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and directed by the Engr-in-Charge.
Supply & fix Mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete
M&L for 100 mm thick PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and directed by the Engr-in-Charge.
S & F 35mm 08022Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sideswith lock rail and panel of 9mm thicl BWP commercial ply or 12mm veneered particle board with commercial face veneers on both faces or 10mm bison panel.
Supply and fix 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by the Engr-in-Charge.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft loose soil
Taking down carefully the old unserviceable aluminium / copper point wiring (light, fan, socket or power etc.) complete including fixtures and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings etc. and removing materials for taking credit and making good disturbed surfaces of wall floor etc. all as specified and directed.
M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable of working voltage 1100 volts grade conforming to IS 694 Pt-I & II of 2020 drawn in and including 25mm size PVC rigid non metalic casing caping (double lock) with all casing capping fittings & accessories with 1.60mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick bakelite sheet fixed with brass screws & cup washers including 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DBs or common earth dolly complete for light point / fan point / exhaust fan point / call bell point / controlled by one switch 5/6 Amp one way complete all as specified and directed.
All as per Item No. 128.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 2.5 Sqmm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge.
S&F in repairs switch piano flush button,single pole, one way, 5 amps complete all as specified and as directed.
S&F in repairs switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed
S&F in repairs switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gangbox complete all as directed.
S&F in repairs ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directed
S&F Sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's SPN, 8 way with 200 Amps rated copper bus bar double door type complete all as specified and as directed.
S&F in repairs MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed.
S&F in repairs round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in repairs Exhaust Fan 250mm sweep, 1400 RPM, 240 Volts, AC 50 HZ, PVC body including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement mortar complete all as specified and directed. (Make : Havells Ventil Air - DX White or equivalent of Almonard/CG/Bajaj)
Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected with galvanised iron/steel earth wire of 4mm dia by means of bolts, nuts, check nuts and washers made outof galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to VTPN DB/SPN DB including neccessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2;4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia MS bars etc complete all as specified and as directed including testing on completion.
All as per Item No. 128.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4 Sqmm multistranded copper conductor wire FRLS PVC insulated and 4 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge.
KAMLESH ENTERPRISE
M/S S. S CHETTRI AND SONS
BIJAY MITTAL
RAAJ BANGAR
KARMA TSETEN BHUTIA
MAHENDRA KHAWAS
KARMA SHERPA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .