Estimate for Renovation and Modernization in Canal Colony Town and District Gurdaspur.

Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base

Dismantling concrete ( e) Reinforced cement concrete

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beadin

Dismantling glazed tiles (to be carefully removed).

Providingand fixing1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approvedmake in all colours, shadesexcept burgundy, bottlegreen, blackof size450x310mmasapprovedby Engineer-in Chargeinskirting, risersofstepsanddadosover 12mmthickbedofcementMortar 1:4(1cement: 4 finesand) andjointingwithgreycementslu rry @3.3kg per sqm including pointing in white cementmixedwithpigment ofmatchingshade complete

Providingand laying 60mmthick factory made cement concrete interlocking Paving blocks of M35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydrauli cpressure for compaction of concrete as per IRCSP63-2014 andof approved size and design/ shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in Charge.

Scraping © Cement plaster

20mm thick cement plaster 1:4 in two coat work

12.5 mm thick cement plaster 1:4

Preparationof plasteredor concretesurface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying twoormore coats toget required finish

Distempering with Acrylic washable oil bound distemper (of approved manufacture) twoor more coats over one priming coat to give an even shade

Dismantling brick work tile, masonry or tile lining (b) In cement

First class burnt work laid in cement sand mortar 1:7 in foundation and plinth

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Reinforced cement concrete M-25 mechanically batchmixed using batch type concrete mixer asper IS:1791andvibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure

Coloured Granite stone tiles 15mm to 20 mm thick inskirting, risersof steps,dadowall sand pllars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment tomatch the shadeof stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge (a) For fixed portion and chawkhats

Cement concrete 1:8:16 (b) With stone aggregates 20mm gauge (ii)mixing by mechanical means using concrete mixer volumetric type

Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineer in-charge

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (a)(iv) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:35mm thick Code: IS 2202-1(1999)

Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf)

Deodar wood doors shutter windows shutter includinghinges, screw and cords etc. Complete fixed in position (a) (ii) Panelled, glazed or glazed and panelled. (ii) 35mm thick

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b) Glazing area above 0.09 sqm (iii) 5.0mm thick Plate glass (INDIAN)

Finishing walls with exterior decorative cement based paint such as snowcem, robbia cemetc. Two or more coats to givean even shade

Dismantling roofing (a) First class mud roofing

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster ncluding two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing

Painting two or more coats excluding priming coat with synthetic enamel paint inall shades on wood work,metallic or plastered,concrete surface to give an even shade

Removing Door sand Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below (b)

Windows of area 3 sqm and below

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (i) For shutter area up to 0.50 sqm

Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span (a) Up to 15.00 Mtr. Span ( Class A Light)

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Dismantling Sanitary fixtures such asEurpoean/Indian/OrissaW.C. ,PVC/Chinaware cistern,WashHandBasin, UrinalPot,Sinksand CP Fittings and disposal of dismantled material within a distance of 100Mtr. complete in all respect as required by Engineer-in-Charge. (a) Eurpoean/Indian/Orissa W.C.,

PVC / China Ware Cistern

Wash Hand Basin / Urinal Pot

CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap

Providing and fixing in position vitreous chinawarewhite lavatory suites of approved make (to theapproval ofEngineer-in charge) includingRackBolt ScrewPair 115mm long without CP fittings complete in all respect. (iii) Size 630 mm x 450 mm x 830 mm

Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (a) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm withP trap or S trap and seat cover complete in all respect.

Providing & fixing in position 15 mm i/d C.P brass wall mixer of approved make (to the approval of Engineer-in-charge ) complete in all respect.(a) C.P brass wall mixer with Telephonic Shower

Providing and fixing in position C.P elbow action pillar tap of approvedmake (to the approvalofEngineer-in charge)completeinall respect

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. rating with frame with or without vent arm and including cement oncrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. (a) With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg)

Providing and fixing in position automatic brass Ball Cock in anks.(A) Plastic Ball Cock with rod and Plastic Ball (iii) 25mm i/d

Providing and fixing inpositionG.I.TankNipple of approved make (to the approval of Engineer-in charge) inPVC Water storage tanks complete in all respect. © G.I. tank nipple 25mm i/d

Providing&Fixing inpostion15mm i/dbib cock of approvedmake (to the approval of Engineer-in-charge )complete in all respect. (i) long body foam flow without flange

Providing & fixing in position PVC flexible tube connectionof approved make (to the approval of Engineer-in-charge ) complete in all respect.(b) PVC tube connection of size15mmx450 mm with C.P. Brass nut

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects

Providing & placing in position on terrace(at all floor levels) HDPE water storage tanks of approved make(to the approval of Engineer-in charge) with cover with suitable locking arrangement andmaking necessary holes for inlet,outlet and over flo pipes but without fittings and base support for tank. (i) Triple Layer Tanks

Providing & Fixingin postions top cock/Angle valve of pprovedmake (to the approval of Engineer-in-charge ) complete in all respect.(d) C.P.brass 20mm concealed stop cock with flange

Providing and fixing jet spray with 2'-6" long PVC pipe.(a) With C.P. Brass nut

Providing and fixing in position C.P. brass bottle trap 32mmdia with 40mm seal of approved make (to the approval of Engineer-in charge) complete in all respect

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.(a) Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230mm

Earthwork excavation in ordinary soil, exclusive of compensation of earth:- (a) Kassi work undressed involving an average horizontal throwup to2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods

Shuttering for face of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for columns (Squareorrectangular or poly gonal in plain)

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.

Excavation in trenches with straight or open cutting instreets, lanesor in open area with 3D/JCB or excavator including manually dressing bed,trimming side sand side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering,provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods,watching,etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface tooriginal level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects (a) Depth not exceeding 3 m. BGL (ii) For Ordinary Soil having gravel 40%

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand ) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.(b) Inside size 90x150 cm and 120 cm deep

Cement concrete 1:6:12 )b) With stone aggregate 40mm gauge (ii) mixing by m echanical means using concrete mixer volumetric type

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches and 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases:- Make: Polycab/ Anchor/ Diplast/ Norpack (i) a Wiring fan point (Without fan box)

Wiring light point

Wiring call-bell point

Wiring 6Amp. wall socket point

Wiring 6Amp. Plug control comprising wall socket point

Wiring 16/20Amp. power plug control point

Supply and erection of PVC 1,620.00 30.34 metre 49,150.80 insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Make: Havells/ RR Kabel/ KEI/ Plaza/ Kunthkib/ Polycab/ L&T,Rellison, or Equivalent (ii) Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, MS saddle clamps and other petty materials etc., as per PWD General Specifications:- Make: Anchor, polycab, Norpack, Adrshplast, Diplast or Equivalent.(x) Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc:Ceiling Rose (Flush Piano type)

Bakelite Batten Holder (Large size )

Call Bell 220/230 volts AC Ding Dong

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs: - Make: Havell's, Legrand( DX3), Schneider (ACTi-9), L&T ( Exora), Hager (NCN), or equivalent. (ii) MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Double Pole 50, 63amp. (10kA, Curve-C)

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB/ RCCB/ RCBO as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB/ RCCB/ RCBO as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- Make: Legrent (Ekinoxe), Scheinder (Acti-9) L&T (Exora), Hager (Novella), Havells (Qve) or Equivalent. SP&N Double Door Distribution Board 8 way each

Supply and erection of Exhaust Fans 250mm 900RPM including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in charges at site. Make:- Crompton Ventilus 10"/Havells Ventil Air DX / DX-HS White /Make: Orient 250 mm Ventilator

Supply and erection of BEE 5 star rating BLDC Ceiling Fan 1200mm (48") No. of blades 3 down rod length 26cm Motor type BLDC star rating 5 star power consumption 26-28 w Rated frequency 50HZ Rated voltage 220-240 Net contents 1N fan motor with PCB controller ,1N safety wire ,1N canopy set ,2N AAA Batteries ( 1.5 V) ,1N downrod , 1N instruction Manual ,1N set of 3 N Blades & 1N Shackel assembly Gurantee : 2 Year including erection testing of ceiling fans Having connection with Pvcx insulated & sheated two single core copper conductor (FR) having cable size 0.75 sqmm .The work should complete in all respects as desired by the Engineer in charge at site Make Crompton -HIGH SPEED, Havells- ES-40 ( 5Star Rating ), Orient-New Breeze ( 5Star ), Bajaj-Sabse Tezz003(3 Star Rating )

Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. is the lighting fixture manufacturer should have inhouse NABL accredited lab. Cromption-CCS-103-20-65-SL -DP-NWH, Havell's￾LUMILINE+BS20WLED 865SPC SS, Philips-BN021C LED22S PSU CW GR, Bajaj- BCLAB 20W LED P, Wipro-LL20-281-XXX-65AL1, Eveready-LEDBTA 02016-02

.Supply & Erection of 15 watt LED Bulb Energy Saving, Enviornment Friendly High Glo LED Lamp comes with 180º beam angle which provides more brightness with wider light spread. It complies with BEE 3-Star Rating. complete in all respect as per approved /desired by the engineer in charge of work at site . Make Orient : B22d/E27L / WW Make Havells : NU BULB+ 15 W 3 STAR B22 CDL Halonix Cat No. ASTRON PLUS 15 Watt CWB

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified

Extraforprefinishednosingtotre adsofstepsof marble stone. ( Full gola, half round gola etc.)

Providing and fixing onwall face unplasticised Rigid PVC rain water pipes single socketed (workingpressure4kgf /cm²)conformingtoIS: 4985, including fixing with MS clamps.(i) Single socketed pipe 110 mm dia .U-PVC pipes working pressure 4kgf/sqcm pipe 110 mm dia

DismantlingH.C.I Soil pipes includingdisposal as desired by the Engineer-in-Charge.(a 100mm i/d H.C.I. pipe

Cuttingchaseinbrickwallsincem entor infloor forembedding G.I.or C.Ipipes lineandmaking good the same to its original condition.(b) Size 150 mm x 150 mm

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipe shaving ISI specification IS:15328-2003 class-SN-8marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment andgradients, cuttingand jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent shouldbeof same makeas that of pipes) complete in all respects.(a) 110mm o/d pipe

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS: 15328-2003 class SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects e 315mm o/d pipe

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. (b) SDR 11 CPVC pipes & fittings 20mm o/d

Curtain rod 25mm dia aluminum pipe with brackets fixed in position including nails and screws etc.

Any Other

# of occurrences