ADDN/ ALTN TO BLDG NO P 20 AND CERTRAIN OTHER WORKS AT AF STN KASAULI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc , and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over a coat of chalk whitening complete all as specified and as directed.

Material and labour for complete removal of existing treatment on surfaces of walls by using appropriate technique as approved by Engr-in-charge for complete removal of all layers of old treatment and reaching upto old plastered surface including filling up all cracks with Shalimar tar plastic (STP) crack filler and also, make good to plastered surface for the area n. exc. 0.01Square metre , if any and applying two coats of oil bound distemper with painting roller over 1mm thick wall care putty white cement based in two or more coats to achive smooth surface over prepared surface complete all as specified and as directed.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified

Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Supply and fixing for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290-Gde E-165, complete all as specified and as directed.

Supply and fixing 1mm thick and 100mm dia angles (internal or external) or nozzle pieces (Out lets) complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fixing 110mm dia UPVC, rain water drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed. (Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing PVC (SWR) reducers complete all as specified and directed. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) including iron mongries and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and as directed.

Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) including iron mongries and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and as directed.

Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) in frame for doors, windows, ventilator shutters, aluminium with one or more rebates including necessary joining cleats, rubber packing, powder coated snap beading, glazing clips to recieve 5.5 mm thick tinted glass for glazing section, etc. complete all as specified complete all as specified and directed Note : The weight of Aluminium sectons shall not be less than 1.20Kg/Rm.

Supply and fixing Aluminium Powder Coated [Powder coating shall be 50 micron minimum thickness) Sections as in window and ventilator Shutters, Side hung type, without Sash Bar, including necessary Joining Cleats, Glazing Clips, Rubber Packing, powder coated snap beading, Screws, Aluminium fittings such as Peg Stays 150mm Long [1 No], Hinges, Type B-21 100mm Long [2 Nos], Suitable Handle [1 No] to each shutter complete all as specified and directed. Note : The weight of Aluminium sectons shall not be less than 1.20Kg/Rm.

Supply and fixing 5.5 mm thick, tinted glass exceeding 0.5 Square metre in each pane to aluminium door/window with glazing clips, rubber gasket etc complete all as specified and as directed.

Supply and fixing figured glass, 5.5mm thick, pin head type, in square exceeding 0.5 Square metre in each pane fixed in aluminium frame as in windows/ventilators, complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing aluminium anodized grill 5.5mm thick weight not less than 2.5kg per square (in the shape of expanded metal aluminium xpm jalli) opening size length of expansion (60mm) and width expansion 45mm fixed in aluminium anodized window with ‘F’ channel of handle section with screw, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and directed.

Supply and fixing, Metal suspended ceiling system OREO GI laid in plain 600X600X0.50 mm (tegular) edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. Note:(i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit at 1200mm maximum centre.The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600 mm mould.Cut cross tees longer than 600mm require independent support. 600X600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm,secured to walls at 450mm maximum centres. (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.50 mmx25/5 with soffit cleat made of galvanised steel of size 27x37x25x1.60mm & level clip in dimensions of 85x30x0.80 mm with 4mm GI wire complete all as specified & directed. Note- Ceiling tiles and ceiling grid shall be of the same make.

Dismantling plain or corrugated mild steel sheeting any gauge, thickness, including Nanital or similar pattern roof covering complete, all as specified and directed.

Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed. Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965.

Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed. Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965.

Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified and directed.

Supply and fixing mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and directed.

Material and labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for screed bed or bedding layer of cement mortar, 15 mm thick for laying floor finishes/tiles in cement mortar 1:4 complete all as specified and as directed.

Material and Labour for Premium quality, vitrified ceramic tiles, dark shade, 9-10mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm tiles , as in floor, set and jointed in neat cement slurry @ 3.00 kg/Square metre and pointed in white or coloured cement to match the surface over and cement screed bed complete all as specified and as directed.

Material and Labour for Premium quality, vitrified ceramic tiles, dark shade, of same description and length as of floor tile but 150 mm height on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and as directed.

Material and labour for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete, all as specified and directed.

Material and labour for 18/19mm thick pre laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination with 1st class hard wood 5mm thick teak wood edging all around, fixed with screws to timber framework and leaping treated with french polish suitable for cup board shutters, palmet box, etc. complete all as specified and as directed.

Supply and fixing, extruded aluminium alloy handles with plates, fabricated type, anodised 75mm size, ISI marked, complete all as specified and directed .

Supply and fixing in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. 25 mm dia with brackets etc complete all as specified and directed .

Dismantling water tanks of capacity exc. 250 ltr and not exc. 500 ltrs and removing from site complete all as specified and as directed.

Supply and fixing water storage tank 500 ltr capacity HDPE triple layer, confirming to ISstandard, fixed and hoisted in position on staging or roof complete with locking arrangement including provn of over flow pipe, air lock pipe, brass valve high pressure with polythene float and flynut , ISI marked, screwed and suitable for iron pipe 20 mm bore, complete all as specified and directed

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed .

Supply and fixing of 15mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed.

Refixing steel water tubing of 15 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed .

Supply and fixing of 20mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed.

Refixing steel water tubing of 20 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat and removing from site complete all as specified.

Material and Labour for plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and directed. Note- If reinforced concrete, reinforcement shall be measured and paid for separately.

Supply and fixing factory made flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified.

Supply and fixing mild steel butt hinge of 100mm length, cold rolled, medium weight, ISI marked complete all as specified and directed.

Supply and fixing mild steel, semi-barrel tower bolt 200 mm , open cover, with sheet pressed barrel, stove enamelled black with bright bolt complete all as specified and as directed.

Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed .

Supply and fixing handle of extruded aluminum alloy, fabricated type, anodized 125mm long, complete all as specified and directed.

Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate 140 mm, ISI marked complete all as specified and as directed.

Material and labour for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fixing 0.80 mm thick Plain, galvanized mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zink coating 275 complete all as specified and directed.

Supply and fixing in repair, for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolt in roof, wall etc. complete all as specified and as directed

Supply and fixing for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290-Gde E-165, complete all as specified and as directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke and low halogen FRLSH, 1100 volt grade for phase (red) and neutral (black), with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke and low halogen FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan/exhaust point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III. Note : (All chases will be cut by chase cutter only).

One light/ ceiling Fan/ Exhaust Fan/ Bell point controlled by one way switch 5 Amp.

All as per item No. 60.00 here-in-before but 4.0 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLSH) cable 1100 volts incuding 4.0 sqmm stranded copper conductor (FRLSH) PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and directed.

All as per item No. 60.00 here-in-before but 2.50 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLSH) cable 1100 volts incuding 2.50 sqmm stranded copper conductor (FRLSH) PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and directed.

Supply and fixing switch piano 6 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing switch piano 15 Amps flush type one way 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing socket outlet, 2 in 1, 6 pin, 6 and 16 Amp, flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 Watt, 220 Volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing sheet metal distribution box, SPN, 12 way, double door, IP 42, CRCA sheet powder coated factory made fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed.

Supply and fixing MCB, Single Pole and neutral, AC supply, 240 volts, 40 Amps, 'C' series,10 kA rupturing capacity and making connections complete all as specified and as directed.

Supply and fixing MCB, Single Pole, AC supply, 240 volts, 06 to 32 Amps, 'C' series,10 kA rupturing capacity and making connections complete all as specified and as directed.

Material and labour for sub main wiring with single core PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC concealed conduit of required size but not less than 25mm dia with all fittings and accessories alongwith one single core green colour PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces as per existing, complete all as specified and directed. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

Taking down existing earthing continuity conductor, aluminium strip 25X3.15 mm , and removing to store for keeping safe custody for refixing and making good to surface complete all as specified and directed .

Taking down existing Air termination single pointed aluminuim Rod 12 mm dia 300 mm long removing to store for keeping safe custody for refixing and refixing the same after completion of civil work complete all as specified and directed .

Refixing of earthing continuity conductor aluminium strip 25 X 3.15 mm with saddles and screw, etc.drawn through conduit in trenches / under floor /on wall or on roof including insulator complete all as specified and directed .

Taking down of existing fitting / fixtures i.e tube light, bulk head, mirror light, LED bulb & exaust fans of any description, make /model and capacity from its own location and kept in safe custody. After completion of civil works i.e plater, distempering or painting, etc, refixing the fitting/ fixtures to be re-fixing after neat and clean in the same location or other location including clening the fitting/ fixtures in proper manner complete all as specified and directed.

Material and labour for earthing with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth lead 4mm wire upto test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel wire mesh and light grade GI wire protection pipe 15mm bore up to main board complete as shown in electrical plate No. 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unserviceable earthing complete all as specified and testing on completion complete all as specified and directed. Note - The units rate includes the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20mm GI pipe (medium grade) for watering 15mm GI pipe for protection of wire (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Material and labour for Flame proof Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable ZHFR (Zero Halogen fire Retardant) 1100 volt grade for phase (red) and neutral (black), with multi stranded copper conductor drawn through and incuding ERW rigid steel heavy duty conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable ZHFR (Zero Halogen fire Retardant), 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III . Note: (All chases will be cut by chase cutter only).

Supply and fixing for LED flame proof light fitting 2x16 Watt, CMRI certified recommended for gas/ vapour, group of IIA & IIIB, Zone 1 & 2 and IP-65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc, complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing for flame proof /weather proof direct entry type, rotary switch, single pole on and off rotary motion swtich in cast alluminium alloy, LM-6 enclosure, epoxy powder coated, single pole, 230 volts 16 Amps, AC ON/OFF switch, entries, earthing terminals for mounting on wall/steel structure, etc. complete in all respect with precesion of flame proof cable gland complete all as specified and directed.

Material and labour for Flame proof Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable ZHFR (Zero Halogen fire Retardant) 1100 volt grade for phase (red) and neutral (black), with multi stranded copper conductor drawn through and incuding flame proof ERW rigid steel heavy duty conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surface and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable ZHFR (Zero Halogen fire Retardant), 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs completion complete all as specified and directed. Note: (i) Three runs of cable and one run of conduit shall be measured and paid as one unit length.

Supply and fixing of flame proof junction box fixed on wall/ ceiling complete all as specified and directed.

Material and labour for passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty' PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 16 Sqmm nominal cross sectional area 4.0 core with suitable glands and lugs as per site requirement confirming to IS specifications, complete all as specified and directed.

Material and labour for double walled corrugated HDPE duct pipe of 50mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection complete all as specified and directed.

Material and labour for circuit wiring from existing DB to 15 Amp socket point including with two runs of single core multistranded copper conductor cable flame retardant low smoke and low halogen FRLSH, PVC insulated unsheathed of size 2.5 Sqmm for phase (red) and neutral (black) and provision of 2.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke and low halogen FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs drawing in and including suitable size of PVC casing caping with all fittings and accessories fixed on wall or ceiling complete all as specified and directed.

Supply and fixing water heater (Geyser) storage type electric of capacity 25 Ltrs , BEE 5 Star rated, AC, 230V, single phase, with all accessories such as safety valve, thermostate, NRV, connection piece etc including with fixing arrangement i.e nut-bolts, fasterners, etc and fixed on wall complete all as specified and directed. Make - Havells with model No. GHWCBNTWH025 or equivalent make/model mentioned in Appendix 'B' of CA.

Supply and fixing PVC box heavy duty including 16 Amp modular switch complete all as specified and directed.

Supply and fixing PVC modular box (DBOXx) with MCB protected socket with plug top of 25 Amp complete all as specified.

Supply and fixing MCB, SP, 16 Amp with sheet metal enclosure single way , 240V, 10 kA, 'C' curve complete all as specified and directed.

Supply and fixing in repair, bib tap, long body, screwed down, high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union complete all as specified and directed. Make- PRIMA Cat No PLF-6202 or equivalent model in makes mentioned in Appendix 'B' of tender document. Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.

Material and labour for cutting existing steel tubing for alterations or additions and inserting of tee & screwing existing steel tubing of size 15mm dia complete all as specified and directed by Engr-in-Charge.

Supply and fixing UPVC, heavy duty pipe, pressure rating upto 10 Kg/ Sqcm including necessary fittings i.e tee, reducer, elbow, union and socket fixed on wall surface complete all as specified and directed.

Material and labour for cutting holes in brick / stone masonry walls built in cement mortar or cement lime mortar for inserting GI tubing of any size and description complete all as specified and directed

Supply and fixing Angle stop valve of PTMT 15mm dia any colour high pressure screwed for iron pipe/ UPVC pipe and fixed on wall complete all as specified and directed.

Supply and fixing PVC connections, 750mm long with heavy duty PTMT nuts and PVC washers on both ends fixed to 15 mm bore of pipe for hot water applications complete all as specified and directed.

Material and labour for circuit wiring with two runs of single core multistranded copper conductor cable flame retardant low smoke and low halogen FRLSH, PVC insulated unsheathed of size 1.5 Sqmm for phase (red) and neutral (black) and provision of 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke and low halogen FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs drawing in and including suitable size of PVC casing caping with all fittings and accessories fixed on wall or ceiling complete all as specified and directed.

Supply and fixing of heavy duty exhaust fan 400mm sweep with corrosion resistant metallic body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, metallic base frame with rubber mountings for silent operation, maximum watt input not more than 410 watt, 1400 RPM, metal blades and shutter type louvers self-openable/ closeble for protecting the entrance of birds as per IS :2132-1967 and testing complete all as specified and as directed.

Supply and fixing of PVC gang box two way heavy duty ,suitable for 6 Amp switch and Socket including switch piano 5 Amps, flush type, single pole, one way and socket outlet 3 pin 6 amps, 230 volt. flush type, ISI Marked complete all as per specified and directed

Supply and fixing PVC modular box (DBOXx) with MCB protected socket 4 module and including 20 Amp rated MCB, Single pole, AC 240V with plug top and fixed on wall surface complete all as per specified and directed.

Supply and fixing PVC connections 600 mm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, suitable for hot water supply complete all as per specified and directed.

Supply and fixing PVC connections 600 mm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, suitable for cold water supply complete all as per specified and directed.

Supply and fixing in repair, angle cock, 15mm dia, cast copper alloy, chromium plated, ISI marked, screwed down, high pressure with capstain head, screwed both ends for iron pipes or for unions complete all as specified and as directed. Make-Prima Art No- PLF-6205 or equivalent model in makes mentioned in Appendix 'B' of tender document . Note: Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.

Amount of credit of Rs. 40180.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Vinod Kumar Aggarwal (BID ID -3481242)

Sagar Builders (BID ID -3481487)