Electrical work

Amount

Renewal by Supply of 8.5 TR Capacity Ductable floor mounted package Unit with 1 no identical compressors of 8.5 TR capacity with required valves.These shall be suitable for operating in a wide range of 415(+/- 10%)with the following technical specification. Type - Floor Mounting Rated Current :40.5 A Refrigerant :R22 Blower Qty – 1 No Weight :190 Kg Mounting: Rubber Gromet Sleeve and nut, blots B)Renewal by Supply of 8.5 TR Ductable floor mounted unit condenser shall be made of super slit high efficient aluminum fins mechanically bonded to copper tubes condenser coil to be rigidly fixed to units frame with fasteners. The fan blades to be statically and dynamically balanced reduce noise and vibration. the fans are direct driven motor with protection with the following technical specification Type :Air cooled finned tube Fin material :Aluminum Type of fin :Louvered Fin Density :14 FPI

Supply and filling of R-22 Refrigerant Gas.

Renewal by supply and fixing of hard drawn copper refrigerant piping of 7/8'' dia interconnecting indoor and outdoor units with necessary fitting,supports etc,.

Supply & fixing of hard drawn copper Refrigerant piping of 5/8” dia interconnection indoor and outdoor units with necessary fitting,supports etc...

Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads, with ceiling Support angle rods etc.

Renewal by Supply, Fabrication and erection of Fabrication Ducting made up of GI sheets of complete with MS angle flanges,anchor fastners,tees and bends where ever necessary

22Gauge sheet

Renewal by supply and fixing of duct mount damper

Supply and Providing Thermal Insulation of 9mm thick –XLPE with aluminium foil./ Nitrile Rubber insulation

Renewal by Supply and providing acoustic lining for initial portion of ducting with 12mm thick galss rigid board covered

Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable Clamp as required.

Renewal by supply and fixing of suitable MS angle frame for mounting the Indoor unit

Renewal by supply and fixing of suitable MS angle frame for mounting the outdoor unit

Renewal by supply and providing thermal insulation for Refrigerant Pipes and Drain pipes

Renewal by supply and providing of power supply for indoor to outdoor unit motors for 10sqmm copper flexible single cable

Renewal by supply and providing of power supply for indoor to outdoor unit motors for 1.5sqmm copper flexible single cable

ReWiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End

Renewal by supply and fixing of 4' 22W LED fitting complete with PVC unsheathed copper leads from terminals to the fitting (Havells/Equivalent Make)

Renewal by supply and fixing of 4' 60W LED fitting complete with PVC unsheathed copper leads from terminals to the fitting (Luker/Equivalent Make)

Renewal by supply and fixing of 12W modern Mirror Light fitting with necessary connections (Philips/ Equivalent Make)

Renewal by supply and fixing of 15W round surafce fitting complete with necessary connection (Havells/Equivalent Make)

Renewal by supply and fixing of 24W round surafce fitting complete with necessary connection (Havells/Equivalent Make)

Renewal by supply and fixing of 2 x 2 42W square type LED fitting complete with PVC unsheathed copper leads from terminals to the fitting (Havells/Equivalent Make)

Renewal by supply and fixing of 25 Litres VENUS 2000W Water Heater on suitable MS Clamps without plumbing work with 1year Warrenty (Venus/Equivalent Make)

Renewal by supply and fixing of 300mm Wall mounting fan complete with necessary connection (Havells/Equivalent Make)

Renewal by Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Renewal by Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Renewal by supply nad fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuse double break in existing panel board with connection

Renewal by supply and fixing of 100A 4 pole MCB isolator in existing 4 way vertical DB with connection.

Renewal by supply and fixing of 1.0HP submersible motor with DOL starter of (L&T/Equivalent Make) on wall with 5 meters 3 core 4.0sqmm submersible cable from motor to starter with necessary connection (Kirloskar/Equivalent Make)

Renewal by Supply and Installation of 2TR Capacity 5 star rated energy efficient Hi-wall Mounting Split Type Inverter Air Conditioning Unit Consisting of Outdoor Condensing Unit complete with hermetically Sealed Air Compressor with R32 refrigerant, air cooled condenser, fan etc and 1 No Indoor Hi-wall Mounted 2 TR Capacity Evaporator unit complete with cooling coil ,blower motor and connected accessories ,control etc., with 3 meter copper refrigerant piping and cord wire connecting Indoor and Outdoor unit with drain pipe suitable for operation on 230V + 10V 50 Hz Single Phase AC Supply(Make Carrier/Toshiba/Voltas/Equivalent Make)

Renewal By Supply and Fixing of 5KVA Capacity Automatic Voltage Stabilizer Double Booster with time delay relay wall mounting type with input voltage 170V to 240 V and Output Voltage 230V +10V and cut out limit suitable for 2TR Split Type AC Unit (Make V Guard/Equivalent Make)

Renewal by Supply and fixing of M.S Stand for fixing of Outdoor AC Unit

Renewal by Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

Renewal by Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

Renewal by supply and Fixing of Plate Earthing Compelete with copper plate with suitable connection

Renewal by supply and run of 25*3mm copper plate on wall with suitable clamps and bold nut arrangement with nessercery connection

Renewal by supply and fixing of 400Amps HRC Fuse unit

Renewal by supply and fixing of 250Amps HRC Fuse unit

Renewal by supply and fixing of 125Amps HRC Fuse unit

GAJENDRAA ELECTRIC COMPANY