Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC NOT FOUND | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.5 L+₹1.6 L (15.5%)Rejected-Finance 4 BY 8 BLOCK H NEAR VIJAY CHOWK EAST DELHI DELHI 110051 | EAST DELHI | DELHI | 110051 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹11.6 L+₹1.6 L (16.0%)Rejected-Finance CC III 28A JANTA BHAWAN ROAD SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹11.9 L+₹1.9 L (19.0%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹13.5 L+₹3.5 L (35.3%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
21 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Sirsa
Military Engineer Services, Garrison Engineer (AF), Sirsa (Haryana)-125055
Comprehensive Maint to Buildings at Jhopra Complex at AF Stn Sirsa
2023_MES_577045_1
GE/SRA/T-58/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) Sirsa
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Sirsa
₹20,000
Yes
27 Mar 2023
24 Jan 2023
23 Feb 2023
24 Jan 2023
21 Feb 2023
7 Feb 2023
25 Jan 2023 - 31 Jan 2023
Amount
Demolition Cement Concrete (Reinforced) of Roofs, Floors (other than Ground Floors), Beams, Staircases, Landing, Chajjas and similar Suspended Work (Reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.
M&L Reinforced Cement Concrete 1:1½:3 Type A-1 (20mm graded stone aggregate) as in Chajjas, facia, lintels and Similar Items, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid under appropriate Item.
M&L Formwork to Chajjas and Similar Items including edges, Flat, Rough finished surfaces of Concrete, complete all as specified and as directed.
Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. and removal of debris from site and disposing outside AF land complete all as specified and as directed.
M&L Brick Work with fly-ash brick (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and as directed.
M&L Brick Work using serviceable bricks obtained from Item No. 04 here-in-before) after removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and as directed.
Taking down damaged/unserviceable Steel Chowkat or Frame n. exc. 1.50 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and as directed.
Taking down Shutter of any description, exc. 1.00 Sqm but not exc. 2.00 Sqm Each and removal from site complete all as specified and as directed.
Taking down damaged/unserviceable Steel Chowkat or Frame exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and as directed.
S&F Pressed Steel Frame of size 105x60 mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed. NOTE : Cost of Steel Hinges shall be deemed to be inclusive in quoted rate.
S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed. NOTE : Cost of Steel Hinges shall be deemed to be inclusive in the quoted rate.
S & F PVC solid door frame of size 50 x 47 mm made out of 5 mm thick prelaminated single side PVC sheet reinforced with MS square tube complete all as specified and as directed.
S&F 30 mm thick factory made both side prelaminated solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm X 19mm for stiles, top and bottom rails, treated with a coat of metal primer, MS frame covered with heat moulded prelaminated PVC 'C' channel for stiles and both side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; stiles and rails feathered at edges, panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in frame and hanging/fixing with and including Stainless Steel/aluminium Hinges, complete all as specified and as directed. NOTE : Hinges will be Measured and Paid under appropriate Item.
M&L Factory Made Panelled Shutter 35mm thick of Second Class Hardwood with Panels of 12mm thick Veneered Particle Board medium density wood with commercial face veneered both side and fitted to Chowkats, having size of Rail and Stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
M&L factory made Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beads supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.
S&F Extruded Aluminium alloy Handle 100mm long (weight not less than 100 Gram), Fabricated type, anodised, complete all as specified and as directed.
S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.
S&F Butt hinges,100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 and fixed, complete all as specified and as directed.
S&F Mild Steel Butt Hinge of size 100mm (weight not less than 80 Gram), complete all as specified and as directed.
S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and as directed.
S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram) , Extruded Section, complete all as specified and as directed.
S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), extruded section, complete all as specified and as directed.
Taking down damaged/unserviceable Steel/aluminium/PVC window with frame not exc. 1.50 Square Metre Each with shutter( without taking off shutter from the frame) and removing from site complete all as specified and as directed.
M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutters, having Outer Frame of Section 50x25mm and Inner Frame of Section 40x20mm, jointed internally with Mild Steel Flat Iron 40x3mm complete with Stainless Steel Tower Bolts, Hinges, Handles, Stops, Lugs, etc. including Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm, etc., complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement and Payment Double Shutters with Frame shall be considered as ONE UNIT. (b) Unit Rate quoted shall deem to be include all the Stainless Steel Builders & Hardware as required/directed at Site. (c) Quoted Unit Rate shall also deem to be include Mild Steel Guard Bars of 10mm Square Bar, spacing at 10 Cm centre to centre on both Vertical & Horizontal directions. (d) Sheet Glass shall be Measured and Paid for separately under appropriate Item.
S&F aluminium window double shutter with provision of booking window if necessary glazed and gauged of galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.18mm along with aluminium section with 50 micron anodizing size of frame 125mm X 44.5 mm size of shutter, top, bottom and side rail 44.5mmx44.5x16mm gauge aluminium section with 50 micron anodizing and 5mm thick black/tinted sheet glass to be fixed on glazed portion and stainless steel hooks and eye to be provided as stay of shutter etc complete incl necessary jointing cleats, glazing clips, rubber packing attached aluminium snap beading, screws,aluminium grill, anodized aluminum fitting such as peg stay 150mm long(01 No. for each leaf)hinges type B-21 100mm long (02 Nos for each leaf) suitable handle (01 No for each leaf) and 100mm aluminium tower bolts (02 Nos in each leaf),brush weather strip,complete all as specified and directed.
S&F Mild Steel 150 mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.
S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram and fixed-in-repairs, complete all as specified and as directed.
Repairing of Aluminium door, windows, ventilators shutter fixed/ side hung, sliding type /partition including replacement of necessary jointing cleats, glazing clips, Rubber Neoprene packing, Aluminium snap beeding ,screws etc and repairing of Locking Arrangement if any,complete all as specified and as directed. Note:- Quoted unit rate shall deem to be include jointing cleats, glazing clips, Rubber Neoprene Packing, Aluminium Snap Beading, screws etc. as required/ordered for necessary fixing at site.
Dismantling damaged/unserviceable Frame of Aluminium Doors, Partition, etc. of any description and removal from site complete all as specified and as directed.
S&F Anodised powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified as directed.
S&F Aluminium Beading 20x3 mm size for Aluminium doors and windows and partition walls, etc including taking down damaged/unservicable Beading complete all as specified and as directed.
S&F Rubber Gasket (as approved) for Aluminium doors and windows and partition walls, etc including taking down damaged/unservicable Rubber Gasket complete all as specified and as directed.
S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and complete all as specified and as directed.
S&F in repairs Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and Fixed complete all as specified and as directed.
Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frames, glazed with putty or fixed with beads, and disposal of debris outside AF land complete all as specified and as directed.
S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Square Metre in Each Pane, complete all as specified and as directed.
S&F in repair Transparent Acrylic Sheet 3.0mm thick in window panes complete all as specified and as directed.
S&F for powder coated aluminium anodised door shutter with frame 101.40x44.45mm including jointing cleates and fixing accessories, size of long rails/style, top and middle/centre rail shall be 84.40x44.45mm and bottom rail shall be 110x44.45mm of aluminium sheet shall be 16 gauge, panels shall be provided with 5mm thick sheet glass and 12mm thick PVC sheet best quality including locking arrangement fixed with hinges to the frame or slididng type or pull & push type shutters including glazing clip, rubber gasket and aluminium beading, 150mm long aluminium handle-02 Nos, mortice lock - 01,brush weather strip, complete all necessary fittings and fixtures all as specified and as directed.
S&F mild steel Mortice lock, 100mm size vertical type, 4 levers, complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cutting, bending, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-bases, complete all as specified and as directed.
M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-bases , complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 75mm thick as in Path/ Hardstanding, laid in alternate Bay/Panel, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Machine Pressed Pre-cast Concrete Interlocking Polished Paver Block 60mm thick of M-35 Grade, with Grey Cement and no Pigment of any shape and size (as ordered), conforming IS-15658-2006, ISI Marked, laid dry over Clean dry Sand and grouted with Clean dry Sand as in Floors including taking up of existing unserviceable paver block complete all as specified and as directed. NOTE : Clean dry Sand will be Measured and Paid separately under appropriate Item.
M&L Sand filling under Floor or in Foundation including watering and consolidation, complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block, Kerb Stones including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) in plinth protection 75 mm thick finished even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand (1:3) by weight complete all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises and disposing outside AF land complete all as specified and directed.
M&L Floor (Paver) Tiles 300x300x9.0 to 10mm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L Non skid coloured ceramic tile 7-8 mm thick (square/rectangular) polished,area of each tlies exc .11 sqmn.exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and and pointed in White or Colour Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate
M&L Coloured Glazed coloured Ceramic Tiles 350x250x7/450 x 350 x 7/300X200X7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendring in Cement Mortar 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
Demolition Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L Machine cut Kota Stone Slab 18-20mm thick in Flooring, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L Machine cut Kota Stone Slab 20-25mm thick in Skirting, laid over 10mm thick backing coat of Cement Mortar 1:4 and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.
Dismantling of ceiling board incl snap grid frame of any thickness including cover fillets and removing from site complete all as specified and directed.
M&L for provn of E-board tiles ceiling on GI powder coated channel/Tee/Grid frame work with the following specification including taking down, cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed with following:- (a) M&L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25x25 mm. (b) S&F of 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling including dash free fasteners (c) S&F GI powder coated tee as in main & cross members at 595mm centre to centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S&F E- board ceiling tiles of size 595mmx595mm and 4-5 mm thickness, confirming to relevant IS codes in squares of GI powder coated tee with clips made to shape, shade and pattern of PVC board shall be as approved by GE.
M&L Rendering (Internal) 15mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and as directed.
M&L Rendering 5.0mm thick in cement mortar 1:3 on Concrete Surfaces of Ceilings, Plastered Surfaces finished Fair and Even complete all as specified and as directed.
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only"
M&L Rendering (External) 10mm thick in cement mortar 1:4 in Monsoon Drains, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE: WPC will be Measured and Paid under appropriate Item.
Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
M&L preparing newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L preparing old Plastered Surfaces of Ceiling and applying Two Coat of White Wash, complete all as specified and as directed.
M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying Two Coat of White Wash, complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying 2 mm thick wall putty duly finished to a smooth surface and applying two coats of acrylic distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L preparing old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of acrylic distemper, complete all as specified and as directed.
M&L preparing old Decorated/Treated Plastered Surfaces of Walls and applying Two Coats of Acrylic Distemper complete all as specified and as directed.
M&L preparing old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Weather Coat Exterior Emulsion Paint (in Camouflaging/Plain Pattern) with approved Tint as per manufacturer's instructions, complete all as specified and as directed.
M&L preparing new previously untreated/Painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying two coats of Synthetic Enamel Paint (First quality) over a coat of pink primer, complete all as specified and as directed.
M&L preparing old Decorated/Painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L preparing old Decorated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L Galvanised Tubes 15mm bore (dia), 'medium grade', with all Fitting and fixed complete to Walls and Ceilings or laid in Floors,including taking up or down and segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and as directed.
M&L Galvanised Tubes 20mm bore (dia), 'medium grade', with all Fitting and fixed complete to Walls and Ceilings or laid in Floors, ,including taking up or down and segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use complete all as specified and as directed.
S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: ARI-39037/ CERA, Cat No: F1005151 / ASIAN PAINTS, Cat No: MYBC101 / PRAYAG, Cat No: 8108 / HINDWARE, Cat No: F390003 / PARRYWARE, Cat No: G1434A1)
S&F in repair chromium plated brass over head shower rose with arm (premium range), with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ HINDWARE, Cat No: F160051)
M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position including dismantling / lowering down unserviceable Water Storage Tanks, complete all as specified and as directed.
S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.
S&F in repair Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.
S&F in repair Gun Metal Gate Valve 20mm bore (dia) with Iron Wheel Head including Flange, screwed both Ends for Iron Pipe, complete all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1339D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
S&F in repair chromium plated brass waste coupling, 32 mm size, full threaded complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101 /PARRYWARE, Cat No: T9911A1 / HINDWARE, Cat No: F850002)
S&F in repair strainer for kitchen sinks, round, complete all as specified and directed. (Make: PRAYAG, Cat No: SA-03 or equivalent item as approved by GE)
S&F in repair 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as approved by GE)
S&F in repair 32 mm bore PVC collapsible waste pipe, 800 mm long complete all as specified and directed. (Make: PRAYAG, Cat No: 3272 or equivalent make as approved by GE)
S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : FUS-29273UPR / PARRYWARE, Cat No: G4816A1 / CERA, Cat No: F1003401 / ASIAN PAINTS, Cat No: ALWM103 / PRAYAG, Cat No: 9375-N / HINDWARE, Cat No: F390020)
S&F in repairs, Tubular towel rail (premium range), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )
S&F Vitreous China Wash Hand Basin 550mm x 400mm in size, white, Flat Back or Angle Back Type, making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Model: FLAIR / HINDWARE, Model: MARIO / JAQUAR, Model: CONTINENTAL / CERA, Model: CLAIR/ASIAN PAINTS, Model: SIRIUS) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
S&F in repair 32mm CP Waste coupling (half threaded) complete all as specified and directed. (MAKE : PRAYAG, Cat No: BEA-10 / CERA, Cat No: F8050101 / PARRYWARE, Cat No: T9910A1 /JAQUAR. Cat No: ALD-705/ HINDWARE, Cat No: F850023)
S&F in repair PTMT Bib cock with wall flange, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : PRAYAG, Cat No: 1241-F or equivalent make as spproved by GE)
S&F Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Make of Urinal : CERA, Model: CARYS / HINDWARE, Cat No: CORTO / PARRYWARE, Model: Aquaseal N )
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : CERA, Cat No: S3010109 / HINDWARE, Cat No. 20042 / PRAYAG, Cat No: 4054 / ASIAN PAINTS, Cat No: WM-32-X)
S&F in repair 15mm bore heavy duty PVC connector pipe of length 600mm with PTMT coupling at both ends, screwed down for pipe all as specified and directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON / CERA)
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc including PVC seat cover complete all as specified and directed. (Make: Parryware, Model : Elite / ESSCO, Model: ELEMENTS / CERA, Model: Conventional / HINDWARE, Model: SLICK / ASIAN PAINTS, Model: TREND) (NOTE: Cost of seat cover, hinges etc shall be deemed to be included in the quoted rate)
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
S&F in repair Chromium plated brass two way Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed. (Make : PARRYWARE, Cat No: T4643A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9011 / ESS ESS, Cat No: PT-04B)
S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4807A1 / JAQUAR, Cat No: FUS-29053 / CERA, Cat No: F1015361 / ASIAN PAINTS, ALAC101 / HINDWARE, Cat No: F390005 / PRAYAG, Cat No: 9010)
S&F in repair Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / CERA, Model: OCEAN)
S&F in repair 15mm bore chromium plated single lever central hole basin mixer (premium range) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : JAQUAR, Cat No: ARI-39001B / CERA, Cat No : F1005451 / ASIAN PAINT, Cat No: MYBM101 / HINDWARE, Cat No: F360011/ PRAYAG, Cat No: 8151 /PARRYWARE, Cat No: T3814A1)
S&F in repair sheet glass shelf assembly consisting of sheet glass shelf with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. (MAKE: HINDWARE, Cat No: F880010 / JAQUAR, Cat No: ACN-1171N / PARRYWARE, Cat No: T6009A1 / PRAYAG, Cat No: BEA-51 / CERA, Cat No: F5001114)
S&F in repair Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed.
M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.
Dismantling of Asbestos cement corrugated, semi-corrugated sheet in roof covering complete all as a specified and as directed
Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.
M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc,fixed with L- type or J-type hook bolts complete all as specified and directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L for mild steel framed Iron doors, etc., framed drain channel cover ; railings; and similar work conforming to Fe.290.Gde-E-165,complete all as specified and as directed.
Desilting/Taking out Bricks bats, pebbels, silt, Mud, clay, etc from bottom of drains including cleaning grass, vegetation, etc, from depth upto 2.5 metre including removing RCC drain cover and refixing the same after cleaning of drain and removing debris to outside MD/AF land where directed, complete all as specified and as directed.
M&L Forming Embankment including Raising (or lowering) of earth, spreading in layers n exc. 30 cm thick ; Watering, raming/rolling and finished to required size,shape etc n exc 4.5 m from base, including Earth excavation, n. exc 1.5m depth and brought the soil to the location from distance exc 1.5 km but n exc 5 km complete all as specified and as directed.
M&L for repairing of overhead steel tank by Arc welding complete all as specified and as direcetd.
S&F 5 mm thick MS Plates Plain, in overhead Steel water Tank, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, complete all as specified and as directed. NOTE:- (a) The rates are inclusive of welding, connecting with rivets, bolts & nuts, fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, fixing complete. (b) The Work is to be executed at 18 metres Height. (c) MS sheets shall be procured/Used only of Primary producers.
S&F 3 mm thick MS Plain sheet, in over Head steel tank Cover square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment , complete all as specified and as directed. NOTE:- (a) The rates are inclusive of welding, connecting with rivets, bolts & nuts, fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, fixing complete. (b) The Work is to be executed at 18 metres Height. (c) MS sheets shall be procured/Used only of Primary producers.
M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Epoxy Paint (First quality) in two layers as per manufacturers instructions over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
S&F in repair 15mm bore chromium plated sink cock swivel casted spout (wall mounted model) as directed by Engineer-in-charge (Make : JAQUAR, Cat No: CON-357KN / ESS ESS, Cat No; C-259 / PARRYWARE, Cat No: G1421A1 or equivalent model in CERA / KOHLER / MARC / CRABTREE)
AGGARWAL CONSTRUCTION CO.
M/s Satguru Traders
Goyal Enterprises
Ajay Enterprises
STAR CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .