Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.6 CrAccepted-AOC NO 622 VANNIYAR NAGAR ALAGAPURAM PERIYAPUDHUR SALEM 636016 | SALEM | SALEM | TAMIL NADU | 636016 | ₹25.6 Cr Quoted ₹27.0 Cr | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹31.8 CrRejected-AOC | ₹31.8 Cr | L2 | Rejected-AOC Other than the lowest bidder |
| 3 | Rejected-Technical 7 3 PUDUMARAPPANUR ARIYUR POST NAMAKKAL 637 015 TAMIL NADU | NAMAKKAL | TAMIL NADU | 637015 | - | - | Rejected-Technical PQ Conditions not complied |
Tender Value
Refer Docs
EMD Value
₹25.6 L
Closing Date
2 Sept 2024, 12:00 pmClosed
Superintending Engineer
Superintending Engineer, PWD, Planning and Design Circle, Chepauk, Chennai-05.
Restoration of Heritage Building Muthammal Chathiram at Orathanadu in Thanjavur District
2024_PWD_473841_1
11/PAD/2024
Open Tender
Civil Works - Buildings
730 days
Thanjavur
Please refer Tender documents.
10 documents required · 10 mandatory
₹0
₹25.6 L
Yes
3 Jan 2025
17 Aug 2024
3 Sept 2024
17 Aug 2024
2 Sept 2024
17 Aug 2024
Amount
Civil Works
Removing the existing vegetation growth in the Building by way of uprooting the plants manually and then drilling with power driller up to the root depth of plants obtain a clean and neat drill so as to continuously inspect and remove left over roots of vegetation growths and to inject pesticides into the holes so as to prevent further growth of vegetation in the future to safeguard the country old heritage building etc. The cost including the cost of pesticides used, hire charges of injecting machine for injecting chemicals, cost of tools and all labour charges, etc., complete. The above works should be carried out as per the direction of the departmental officers
Small Plants
Medium Plants
Plants
Providing two legged scaffolding using 48.30mm dia heavy duty MS pipe over all height of 3.00m the distance between 2 legs being 1.25m and the spacing of the post being 2m in each rows and providing platform with C.W. planks using 40mm thick silver oak and 1.00m wide in complete form with horizontal bracings @ 1.50m c/c vertical direction and with cross bracings using same 48.30mm dia including cutting, threading assembly with red oxide primer, labour charges cost of specials such on large plate, shoe, carcher, coupling, bolt and nut transportation charges. The bottom of vertical post shall rest on 300x300x70mm 1:2:4 concrete base etc complete complying with standard specification and as directed by the departmental officers.
For initial 3m height
For every additional 2.50m height
Dismantling and clearing away carefully and stacking materials useful for reuse the cracked/ dislodged brickwall of the buildings and to dispose the debris etc., complete complying with standard specification and as directed by the departmental officers.
Removal of damaged wooden doors and windows and clearing away carefully and stacking materials useful for reuse without causing any damage to the existing ancient brick masonry wall including carefully removing brick corners of doors and windows etc complete complying with standard specification and as directed by the departmental officers.
Careful removal of old deteriorated lime plaster manually and raking out joints of lime mortar and preparing the surface for replastering, including disposal of debris to dumping ground within 50 metres lead etc., complete complying with standard specification and as directed by the departmental officers.
Carefully removing and clearing away carefully and stacking materials useful for reuse of the decayed wooden beam/joist/girder in Madras terrace roofing in all floors by carefully dislodging at ends and top including making necessary notches or openings in the wall on either side of joist, beam to enable it removed etc., complete complying with standard specification and as directed by the departmental officers.
Dismantling of brick jelly lime concrete flooring of any thickness and conveying by trolly and stacking the useful stone for reuse etc.,
Dismantling and clearing away carefully and stacking materials useful for reuse of damaged Mangalore tile roofing including removal of pan tiles , wooden reeper with T.W. planks and stocking of the useful materials etc. complete complying with standard specification and as directed by the departmental officers
Collecting the scattered debris from the campus and conveying away the same to outside by lorry to a lead of 10KM including loading and unloading charges and dumping in low places and leveling etc., complete.
Construction of mortar pit of size 0.90x0.45m with necessary earth work excavation of sand filling 15cm thick, PCC 1:5:10, 8cm thick brick partition wall 11.50cm thick to a height of 60cm with plastering 1:5, 12mm thick on both sides etc complying with standard specification and as directed by the departmental officers.
Dismantling of Cracked Madras terrace roofing after giving proper centering to the ceiling for the safety of labourers and coveying the debris from inside to outside etc., complete complying with standard specification and as directed by the departmental officers.
Dismantling of damaged and undulated flooring and conveying debries from all floors to ground level outside the building etc., complete complying with standard specification and as directed by the departmental officers.
Provision for monsoon shed using high density plastic sheet laid above a temporary structure etc complete complying with standard specification and as directed by the departmental officers.
Providing and laying protection covering over stone and tiled flooring surfaces by using POP over plastic sheets to protect the surface underneath from scratches, damage and abrasion etc. until the completion of all restoration works in the area/room etc complete complying with standard specification and as directed by the departmental officers.
Providing high density protection sheets to protect wooden/ oxide and tiled flooring from damage such as dust, abrasions, scratches, etc until the completion of all restoration works in the area/room etc complete complying with standard specification and as directed by the departmental officers.
Reconstruction of brick masonry wall with similar type of bricks in lime mortar 1:2 (one lime two sand) using II Class Ground Moulded Chamber Burnt Bricks of size 9" x 43/8" x 23/4"(Specially manufacturing) and using lime in all floors as per traditional preparation and documented type construction such as arches and lintels, walls, etc., complete complying with standard specification and as directed by the departmental officers.
Ground Floor
Providing and fixing teak wood decorative panelled door adesign and specification should be approved departmental officers and complete complying with standard specification and as directed by the departmental officers.
Renewing and fixing teakwood panelled shutters openable type for Doors by using well seasoned teakwood of superior quality and approved variety as per the original design and pattern instructed by the Engineer In Charge.The door shutter is made with two number of 120mm x 40mm size vertical styles, toprail, lock rails and bottom rail of size 125mm x 40mm , 250mm x 40mm, 170mm x 40mm respectively.The door shutter panels is covered with teakwood planks of 25mm thick including all necessary fittings brass/ steel hardwares like screws, nails, hinges, hooks, tower bolts, handles, aldrops of same design, size and weight,etc., complete. Item to also include making all the mouldings and design of the panels as in the existing evidence. Item to include complete finishing of the shutters as directed by the departmental officers. (The rate inclusive of cost of all teakwood materials, labour wrought and putup of door frames and shutters , cost of all furniture fittings, labour charges for fixing in position etc., complete complying with standard specifications (two leaves).
Renewing and fixing of panelled window openable type by using well seasoned teakwood of superior quality as per the original design and pattern instructed by the Engineer In Charge. The window shutter is made with two number of 75mm x 35mm size vertical styles, top rail, respectively. The window shutter panels is covered with teak wook planks of 35mm thick including all necessary fittings brass/ steel hardwares like screws, nails, hinges, hooks, tower bolts, handles, aldrops of same design, size and weight,etc Item to also include making all the mouldings and design of the panels as in the existing evidence. Item to include complete finishing of the shutters as directed by the departmental officers.(The rate inclusive of cost of all teakwood materials, labour wrought and putup of door shutters, cost of all furniture fittings, labour charges for fixing the shutters in position etc., complete complying with standard specifications)
Making , supplying and fixing of new stone Base for replacing the broken and missing stone capital over the high wall at roof level as per existing clues and style etc., complete complying with standard specification and as directed by the departmental officers.
Teakwood wrought & putup for joist, beam, rafters and purlins,etc., which are in full length new member placed for supporting the Madras Terrace roof/ Mangalore tiles roof or any other area in all floor as directed by the departmental officers by using well seasoned superior quality and approved variety of teakwood for heritage building work including fixing of iron holdfasts incase of doors, windows and ventilators etc.,and excluding cost of holdfasts and making necessary size holes in the masonry to receive the ends of wooden joists, beams, etc., all fixtures and fastenings etc., complete. Item to include all moulding and chamber to be made as per original design indicated by the Engineer In Charge. (The rate includes the cost of teakwood, labour charges for wrought and putup to the existing clue/design, fixing in position to true alignment and gradient wherever necessary.
Grouting and stiching the wide cracks at roof using lime mortar 1:2 with pot pieces for filling up the cracks and the voids, creivices and gap etc.shall be completely sealed with necessary grouting pump. This pressure pump is to be used after cleaning the cracks, washing etc., and then the cracks are grouted with lime mortar 1:2 and it is allowed to be cured till final setting of lime mortar before taking up further leak proof treatment work.
Finishing the top of roof surface using specially manufactured superior quality terrace tiles of size 150x150x25mm (nattu odu) for heritage works laid with Lime mortar 1:2 (one Lime and two sand). The Terrace tiles should be laid on such a manner with proper slope and gradient that the rain water gets discharged easily through rain water outlet pipes freely. The quality of lime to be procured from shall be of best and high calcium oxide content quality etc complete.The rate including cost of all materials,Labour charges, lift arrangements, tranportation of material from G.F to T.F by head load and finishing neatly etc complete.
Strengthening the existing walls by providing grouting by formation of holes of size 1" to 2" with required intervals - depth of 20cm depending upon the site conditions and slurry consisting of lime mortar 1:2 ( one lime and two of sand) added with grouting admixture by 2% weight of lime, by using required equipment with standard specification as directed by the departmental officials. the rate include cost of all materials , labour charges etc., complete complying with standard specification and as directed by the departmental officers.
Racking out the brick joints of walls, arches, etc.,to a depth of approximately 5cm for a wall thickness of 45cm and above to remove the dead mortar in between the brick joints and cleaning the surface with coir brush and washed with pure water etc complete complying with standard specification and as directed by the departmental officers.
Replastering ( base plastering) the brick wall, pillars and arches, etc., with lime mortar 1:2 ( one of lime and two of sand) to a thickness of 30 mm laid in two layers of 15mm thick using lime in all floors etc., complete complying with standard specification and as directed by the departmental officers.
Replastering the ceiling, etc., with Lime mortar 1:1.5 (one Lime and one and half sand), 20mm thick using lime in all floors including labour charges, etc., complete complying with standard specifications as directed by the departmental officers.
Revarnishing with old / new wood work with two coats of best melamine varnish of approved quality and brand including preparation of surface etc., in all floors The rate is inclusive the cost of all material, labour charges and finishing neatly etc., complete complying with standard specification and as directed by the departmental officers.
Painting wood work with two finishing coats of synthetic enamel ready mixed paint of good quality and approved variety and colour over one coat priming coat in all floors including the cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Supplying and filling in foundation and basement and trenches with FILLING SAND in layers of not more than 15cm thick, well watered, rammed and consolidated complying with standard specification etc.,complete.
Providing Anti termite treatment as per IS 6315 (Part ‐2) 2001 (Pre‐constructional chemical treatment measures) along with internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure confirming to IS 6315 (Part‐2) 2001 1% concentration @7.5 liters/sqm of the vertical surface @ 5.0 liters/Sqm of the horizontal surface of the sub structure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc and Overheads & contractors profit for finished item of work as per the approval of the Engineer‐in‐ charge
Laying of Brick jelly lime concrete in lime mortar 1:2 (One lime and two brick jelly) using 20 mm gauge brick jelly for foundation, flooring including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc complete complying with standard specification and as directed by the departmental officers
Paving the floor with best quality Heritage pattern Cement tile of bharat tiles brand of size 200 x 200 x 20 mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments, polishd and leveled etc., got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Relaying of new cut stone flooring with stone of thickenss 75 mm (fully dressed to size on all faces) over bed of existing brick jelly concrete in lime mortar 1: 2 (One of lime and two of sand) 40mm thick using lime in all floors and pointing the stone joints with same lime mortar etc, complete complying with standard specification as directed by the departmental officers.
Labour charges for supplying and fixing of hoisting machine by hire basis for lifting of all materials from ground to terrace and shifting of damaged unused materials from terrace to ground floor with necessary rope, heisting platform, motor, controller as per site requirement days etc., the rate is inclusive of hire charges for machine, labour charges for operating the machine and daily Bata and conveyance charges and dismantling and removing the same after completion of work etc complete with standard specification and as directed by the departmental officers.
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification..
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.
Providing pest control with antitermite treatment in all floors by drilling holes at junction of walls with floors at 300mm intervals and injecting chemical emulsion on those with cement etc. making holes along the vertical surface outside the walls at 150mm intervals to the depth of 450mm pointing chemical emulsion into the holes and closing holes with chemical etc. spraying all surface of treatment is to be done as per IS code no:5313/ Part III 1981 with approved chemical.(The chemical is to be used on the work should be got approved by the Executive Engineer before use on work) etc., complete complying with standard specification and as directed by the departmental officers.
Supplying and fixing in position of Shade Net (Green Net) using vertical protection for under construction / High-rise building. The net standard size is 3mx50m &5mx50m. The rate is inclusive cost of Agro Shade Net, binding wire(or) cable tie, Labour charges for fixing in position and neatly etc., complete complying with standard specification and as directed by the departmental officers.
Laying of best tiled roofing with mangalore tiles set in Lime mortar 1:2 ( one of lime and two of sand) over flat tiles Flat tiles 15cm x 15cm x 12mm including Teak wood reepers of size (50x12mm) with T.W.planks size (upto 15cm wide & 12mm thick) and Zinc coated aluminium sheet (0.47mm thick) including of labour charges etc complete complying with standard specification as per directed by the departmental officers.
Ground floor
First floor
Renewing the damaged teak wood ornamental hand rail in stair case and verandha portion with superior quality of teak wood and kadasal work in all the members, the top member of size 8 x 6 cm with curved surface, in bottom member of size 10 x 8 cm, the internal vertical supports are 6.5 x 6.5 cm, the internal bracing and design members of side with 2.50 x 2.50 cm with complete kadasal works, the rate inclusive of cost teak wood, skilled labour charges, necessary screws, nails, etc., complete complying with standard specification as directed by the departmental officers.
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Redoing of Madras terrace roofing with brick on edge using Special terrace brick of size 15cmx7.50cm x2.50cm in lime motor 1:1.5 (one of lime and one and half of sand) first layer over the joists, over which one layer of special terrace brick of size 15cmx7.50cmx2.50cm , then brick jelly concrete in lime to a thickness of 150 mm is laid and then and placing two layers of flat tiles of size 15cm x15 cm x 20mm over the brick jelly in lime mortar 1:2 (one of lime and two of sand) etc., and base plastering the top and bottom of the three layer in Lime mortar 1:2 (one of lime and two of sand) 15 mm thick with top of the one layer applying of SBR (Synthetic Butadine Rubber Polymer) for Water proof chemical treatment using 0.50 Litres for 1 Sq.m used including neat finsihing etc complete complying with standard specification and as directed by the departmental officers.
Applying thin coat of hand grinded lime mortar paste ( mix should be with 1 kg of jaggery , 1 kg of galnut , 30 nos. egg 0.5 kg of vajram , 3 kg of white marble powder 0.5 kg of redoxide and 0.5 kg of yellow oxide for 10 sq.m area ) (Theervai) over the newly plastered surface as per the existing clues (including finishing the surface with smoothness) erection of scaffolding curing etc., complete complying with standard specification and as directed by the departmental officers.
Clean removal of saline action over the stone pillars, brick wall etc., with paper pulp treatment by using floating paper, deionized water,plastic bucket, coir, brush etc., complete complying with standard specifications as per directed by the departmental officers
Grouting of the masonry cracks by using lime based slurries (slaked lime & fine sand (<1400 microns)) with pozzolonic additives (0.5% polymer fluidiser) including cost of Killick Nixon low pressure grout pump & nipples (inserting nozzles and low pressure pumping to consolidate the walls) complete complying with standard specification and as directed by the departmental officers.
Stitching of cracks using stone lintels (1200x600x16 to 18mm) for the cracks in the masonry walls as specified including making groove, cutting and inserting stone slab, packing with mortar and making good the masonry work etc., complete complying with standard specification and as directed by the departmental officers.
Stitching of cracks using 12mm dia. and 2’ long SS‐rods . The rods should be applied with a layer of anti‐corrosive paint, the ends of the rod to be bent at 6’’ each then to be inserted into the masonry after drilling a hole and making a 1/2" groove in the masonry, packing with lime mortar and making good the masonry etc., complete complying with standard specification and as directed by the departmental officers.
Renewing and fixing eaves board of size 25cm x 2cm using teakwood of best quality as per existing style inluding cost of teakwood, labour wrought and putup, labour charges for fixing in position etc.complete complying with standard specification.
Painting Bitumen Coat (Japan Black) for wood works with two coats with over cleaned wooden members surface like Beam, Rafters, Planks wherever the embeded in masonry walls, to avoid termite attack and fungus formation.The rate inclusive of cost of materials and labour charges but excluding high scaffolding charages etc complete complying with standard specification and as directed by the departmental officers
Painting Terminator coat for wood works with over cleaned wooden members surface like Beam, Rafters, Planks at all sides, to avoid termite attack and fungus formation.The rate inclusive of cost of materials and labour charges but excluding high scaffolding charages etc complete complying with standard specification and as directed by the departmental officers
Easing and repairing hanging doors, window shutters and refixing the same after attending the petty repairs including fixing furniture fittings and excluding cost of furniture fittings etc., complete complying with standard specification and as directed by the departmental officers.
Strengthening of the brick foundation of the wall with similar type of bricks by the method of mending / under pinning/ grouting etc., as per the existing clues with lime mortar 1:2, (one of lime and two of sand) etc., including scooping out the eroded/ damaged brick and cleaning the surface etc., complete complying with standard specification and as directed by the departmental officers.
Providing temporary barricading arrangements alround the the site using PPGI sheet of 0.47mmthick shall be fixed in the frame for made out of required height using 50mmx50mm x2.60mm square MS tubes vertical strut placed and Horizental 32mmx32mmx2.60mm thick M.S. tubes at 1.20m interval with necessary scews and welding including cost of conveyance of all required materials to work site, erecting work, cost of J- bolts washers, cement concrete bed 45cmx45cmx90cm in Plain Cement concrete 1:2:4 and including labour charges etc complete., The barricading arranagements are made to prevent the entry of public into the site is very dangerous due to the fallen roof with necessary door arrangements for staffs and labour etc.,complete and as directed by the departmental officers. [The barricade will remain in the same location till the completion of the project and No additional charges shall be paid for the extended period of contract]
Renewing and fixing in position of well seasoned superior quality of teakwood planks of size 150mm x 12mm to a required length including fixing the planks in the ceiling of mangalore tiled roofing/Madras Terrace Roofing or wherever necessary screws, nails,etc., complete complying with standard specification as per directed by the departmental officers. . (The Rate includes the cost of teakwood planks,wrought and putup of teakwood planks,fixing the teakwood planks in position and cost of all nails, screws,etc)
Dismantling of existing damaged ornamental elements (upto 7m in height) such as Kalasam, Mahapadmam, Muganasi, ornamental pillars, Vimanams, etc by chipping
Scraping the old pasi and cleaning the interior surface of existing ornamental elements (upto 7m in height) such as Kalasam, Mahapadmam, Muganasi, ornamental pillars, Vimanams, etc with wire brush and water finishing
Providing Ornamental brickwork with Kazhugumalai lime mortor 1:3 for ornamental element (upto 7m in height) such as Kalasam, Mahapadman, Muganasi, ornamental pillars, Vimanams, etc using 2 inches thick Country bricks and Cithukal
Providing ornamental Plastering 1:3 using Virudhunagar lime to Complete Nayam theervai 1:3 (one lime and 3 sand) with P-sand excluding new sudai Vigrahams for ornamental elements such as Kalasam, Mahapadman, Muganasi, ornamental pillars, Vimanams, etc
Providing new Sudhai Vigrahams upto 3 feet height (according to silpasastra) in the galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in cement mortar 1:3 lime mortar nayam theervai wherever necessary inclusive of cost and conveyance of all material.
Providing new Sudhai Vigrahams 3 - 4 feet height (according to silpasastram) in the galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in cement mortar 1:3 lime mortar nayam theervai wherever necessary inclusive of cost and conveyance of all material.
Providing new Kalasam 750 mm height (according to silpasastram) with teak wood reinforcement of suitable dia with jute coirs wherever necessary, shaping the core with broken bricks set in 1:3 lime mortar nayam theervai wherever necessary inclusive of cost and conveyance of all material.
Providing water jet washing and appropriate parameter to restore the original glossy in Granite structures and thereby removing all dirts, pasi,lime coat,etc from all surface and Providing Kangan pointing 1:3 Kazhugumalai lime mortar nayam theervai wherever necessary inclusive of cost and conveyance of all material.Power and water will be supplied by the department at free of cost.
Jaali all around the vimanam in the front chariot in the galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in cement mortar 1:3 lime mortar nayam theervai wherever necessary inclusive of cost and conveyance of all material.
Labour charges for providing ornamental decorative elements in the teak wood of Regular square base of size 0.27m×0.27mx2.18m through wooden carving which includes the Column Shaft, Pothiyal, uthiram above pothiyal, an octogonal (yettupattam) column above the capital of the column and another octagonal wooden piece above it.
Labour charges for providing ornamental decorative elements to the teak wood Regular octogonal column of size 0.37mx0.37x3.00 through wooden carving which include two pothiyal in 900mm in height with surul form design in it; Pirambu vadivam in the eight side corners of the octogonal column; and thamam & siru Kodi vadivam in the top wooden piece above the capital
Labour charges for providing ornamental decorative elements to the teak wood Regular octogonal column of size 0.37mx0.37x 2.16 through wooden carving which include two pothiyal in 900mm in height with surul form design in it; Pirambu vadivam in the eight side corners of the octogonal column; and thamam & siru Kodi vadivam in the top wooden piece above the capital
Labour charges for providing ornamental decorative elements to the teak wood decorative octogonal column of size (0.37m×0.37mx3.00m) through intrinsic wooden carvings which include Nagapantha flower design in all eight sides of the octogonal base; Vel vadiva mugappu design in eight side corners of the octogonal capital; Ruthiratcham shapes in all sides of the column; thamam flower design in all eight sides of the octogonal wooden piece above the capital; above that a cithukal design in 4 side and a pothiyal with valaipoo, ruthiratcham Kodi & flower design in the top
Labour charges for Providing ornamental decorative Uthira simmayaazhi element of size 12"x9"x9" in the uthirakattai above the pothiyal of the regular octogonal column
Labour charges for Providing ornamental decorative elements through wooden carving in the square wooden plank below the ceiling and above the uthirakattai with different kumabam ,kili vadivam & Poo vadivam designs
Labour charges for Providing ornamental decorative elements in the ceiling laada kattai such as sunflower designs forms and poo vadivam in all 4 corners of the wooden piece
Labour of providing ornamental decorative elements in the Mallu kattai which laterally support the kuthu kattai below the mangalore tile roof such as sunflower designs forms and poo vadivam in all 4 corners of the wooden piece
Electrical Works
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with Continuous earth wire connection of 14 SWG TC wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 4 Points / Coil) Higher End
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Higher End.
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module GI switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm. Cu wire for Open PVC conduit Plug point ( 8 points / Coil) Higher End.
Supply and fixing of Surface Mount Single Module Light with 10.7W LED Warm White IP-20, 3000K Lamp (Make: LEDS C4/Equ.) with all mounting accessories with PVC Unsheathed copper leads from terminals to the fitting.
Supply and fixing of Decorative Wall Light Fitting (Make: Philips/Equ.) with 8W Filament LED Bulb Light Warm White/2700K (Make: Philips/Equ.) with accessories for Mounting on Wall.
Supply and fixing of Decorative Wall Light Fitting (Make: Philips/Equ.) with 4W Filament LED Bulb Light Warm White/2700K (Make: Philips/Equ.) with accessories for Mounting on Wall.
Supply and fixing of Decorative Chandelier light fitting (Make: Philips/Equ.) with 5 Nos. 4W Filament LED Bulb Light Warm White/2700K (Make: Philips/Equ.) with mouting screws and brackets and suspenstion from the ceiling with PVC unseathed copper leads from terminals to the fitting.
Supply and fixing of Architectural Tracks Spot Light Fitting with 10W LED Light (IP 23, Warm White 3000K) with mounting Screws and Brackets with PVC Unsheathed copper leads from terminals to the fitting. (Make: LEDS C4/Equ.)
Supply and fixing of Inground luminaires up pathways with 27W LED light (Warm White 3000K) IP65 ingress protection made up of Stainless Steel Aluminium Structure and Toughened Glass Diffuser (Make: LEDS C4/Equ.).
Supply and fixing of single box type 4'20W LED fitting with LED complete with T.W. round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting. (Make : Philips / Havells / Equivalent).
Supply and fixing of WT Bulk Head Fitting with Guard suitable for 9W LED Bulb.
Supply and fixing of 450mm Sweep Wall Mounting fan complete with necessary accessories with connection complete. (Make:Almonard/ Crompton /Havells/ Usha /Equivalent)
Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.
Supply and fixing of specially Heavy type water poof, Dust proof integral luminaries fitting provided with 1×150 Watts LED High Lumen Flood Light fitting (Crompton / Philips make or Equivalent) with control switch gears, Alglas coated reflectors, with cable connection etc: complete as per standard specification.
Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia.GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.
Supply and fixing of 1250 mm BLDC ceiling fan complete with 2 Module fan stepped regulator with 1/2 module box with cover plate with 2000mm down rod with Fan clamp (Make: Havells/Equ.).
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.
Supply and fixing of 3nos. 6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.
Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make].
Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.
Supply and fixing of 200A TPN sheet steel double break switch with HRC fuses and neutral on suitable angle iron frame work with MS cable entry boxes and with earth connection only
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.
Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
Supply and fixing of 3 phase 8-Way vertical type double door with IP-42 protection (MDS/ Legrand/ L&T make/ equivalent) in sheet steel enclosure with busbars and neutral links with 1 No 125A 4-Pole MCB as incoming and 6 Nos 32A TP MCB & 6 Nos 20/32A SPMCB as outgoing in flush with wall and making good of the concealed portion with earth connection only. (The MCBDB and MCB's should be of Higher End)
Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete.
Supply and fixing of 3 Phase 200A aerial fuse unit for 3 Nos 200A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.
Supply, Erection, testing and commissioning of dust and vermin proof outdoor metering box of suitable size made up of 16 SWG CRCA sheet steel for Outter Body and Doors to accomodate 200A EB Meter Board and 200A TPN Main Switch with Painting with two coats of high quality epoxy paint over one coat of red oxide primer.
Supply and Erection of Testing and Commissioning of UPS unit of Capacity 2KVA with input voltage of 230Volt 1-Phase AC Supply for 50Hz and output voltage 230Volt 1-Phase AC Supply for 50Hz , Pure Sine Wave with the following accessories circuit and 120Mins Backup at full load with UPS Stand Arrangements 1) Battery Charging Devices 2) Inverter Circuits with Isolation Transformer 3) Overload as well as Short Circuit, Short Circuit Tripping Device 4) Indication LED is for all operation like Battery Etc., 5) Reset switch 6) Batteries: SMF Make Exide Express/ SF Sonic or Equivalent (For UPS Power Supply)
Outgoing: 4 Nos 125A TPN Switch Disconnector Fuse Units Interior Only with HRC Fuses Double Break (L&T / Siemens) 4 Nos 63A TPN Switch Disconnector Fuse Units Interior Only with HRC Fuses Double Break (L&T / Siemens) The above cubical panel board rest on suitable angle iron base.
Supply, testing, commissioning and handing over of 1 No. 40 KVA Diesel generator set of 0.8 PF three phase 415/420 V 50 Hz, 1500 RPM CPCB Approved capacity compressing of Engine (Kirloskar/ Equ) developing 210 BHP water cooled clock wise rotating feed pump with 24KW/30KVA operating capacity brushless alternator close coupled underneath fuel tank standard safeties LLOP with stop solenoid battery with lead Electric start and vibration fitting and acessories and Standard Panel as detailed below including transporting and unloading charges. (A) ENGINE Water cooled diesel engine suitable for generating application with a shaft output of 40 BHP at 1500 RPM under NTP conditions.The engine shall comprise the following standard fittings.Flexible coupling,Fly wheel,air cleaner,Fan blower,Radiator water pump, fuel pump, fuel filter lubricating oil filter etc. (B)12V Electronic starting Equipment. Complete with starter motor dynamo standard batteries with cable flexible exhaust piping of 50 cms length. (C) ENGINE INSTRUMENT PANEL/ MOUNTED Starting push button/starting key lubricating oil temperature gauge lubricating oil pressure gauge water temperature guage safety control for low lubricating oil pressure, safety control for high water temperature safety control for over speed hour meter(Mechanical) and RPM indicator battery charging ammeter.
28) 1set. Timers 29) Audio and visual indicator arrangements for a. Low lubricating oil pressure b. High water temperature c. Overspeed 30) 1No. Earth fault relay 31) Isolator to isolate the neutral Note: 1. The control panel should be complete with necessary fuses, cables label other accessories and with neutral isolation arrangements. 2. The engine should trip for the following a. Low lubricating oil pressure b. High water temperature c. Overspeed (F) BASE FRAME: The base frame should be fabricated MS channel frame of rigidly welded construction for mounting of generator set. The engine and alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame with proper alignment. (G) ACCOUSTIC ENCLOSURE: Specially designed to meet stringent MoEF/ CPCB norms of 75 dBA @ 1mtr at 75% load under free field conditions. The acoustic enclosure is made of CRCA sheets in Munsel green shade and a structural/ sheet metal base frame painted in black.
High quality noise absorbant and fre-retardant grade acoustic insulation material (Rockwool) complying to IS 8183. (1) Supply of manuals for operation & maintenance of DG set with warranty card etc. (SR) (H) Fuel Tank 150 Ltrs. Removable Fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet an outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance. (I) Battery 1No 12V 85AH battery (Kirloskar/Ashok Leyland make)
Erection of Gen set:- Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation erection of 30KVA Generator set over the existing foundation and erection of Generator set with proper alignment over the existing foundation to suit 30KVA Gen set.
Supply and installation of exhaust piping with Silencer of sufficient length with suitable MS pipe so as to extend outside the generator with necessary thermal insulation .
Providing fuel oil to run the set for 8 hours on load testing and commissioning using water rheostat or suitable leading element.First charging of fuel oil to full capacity and first charging of battery while handing over to dept.
Supply of tools such as 1no. 15” cutting pliers, 1no. 6” screw driver, 2nos. 9” screw drives, 1set of 6nos, double ended spanners, 1no. Adjustable spanner, 1no. ½ Ib hammer, 1no. Spanner for removing engine oil plug, 1no. Line tester required for the maintenance and operation of the generator set -1set.
Preparation of site plan, physical layout, electrical line schematic diagram in 10 sets getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG inspection and obtaining safety certificate preparation of 1 set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in generator room and payment of CEIG inspection fees.
Supply and demonstration of the following safety accessories: a) one set of 4 nos. fire buckets made out of 40 x 40x60 mm MS angle b) first aid box with medicine complete with all first aid medicines c) Danger Board as required by the Electrical Autorities d)Fire extinguishers Co2, 4.5 Kg confirming to TAC Norms e)First Aid Chart Tamil & English
Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling and making good of the concealed portion with suitable colour.
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm Cu wire with painting of suitable colour.
Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4sqmm Cu wire with painting of suitable colour.
Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 6 sq.mm Cu wire with painting of suitable colour.
Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 6 sq.mm. Cu wire with painting of suitable colour
Supply and laying of 4x6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Supply and clamping of 4x6 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
Supply and fixing of brass cable gland for 4x6sq.mm PVC Armoured LTUG Cable with earth connection.
Supply and Run of 4 of 16 sq.mm. (101/0.45) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 16 sq.mm. Cu wire with painting of suitable colour.
Supply and laying 3½ X 50 sq.mm PVC Armoured LTUG Cable a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Supply and clamping of 3½ X 50 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
Supply and fixing of brass cable gland for 3½ X 50 sq.mm PVC Armoured LTUG Cable with earth connection.
Supply and providing cable end termination of 3½ X 50 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
Supply and laying 3½ X 120 sq.mm PVC Armoured LTUG Cable a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Supply and clamping of 3½ X 120 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
Supply and fixing of brass cable gland for 3½ X 120 sq.mm PVC LTUG Armoured Cable with earth connection.
Supply and providing cable end termination of 3½ X 120 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
Supply and laying 3½ X 150 sq.mm PVC Armoured LTUG Cable a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Supply and clamping of 3½ X 150 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
Renewal by Supply and fixing of brass cable gland for 3½ X 150 sq.mm PVC Armoured LTUG Cable with earth connection.
Supply and providing cable end termination of 3½ X 150 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.
Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.
Supply and fixing of Aluminium Alloy solid round conductor with 8mm dia of material AlMgSi as per IEC 62561-2 with conductor Holder, Glue, Connectors, joints, etc,.
Supply and fixing of 4Mtr Air termination rod 16/10 mm (lightning rod)
Supply and fixing of Lightening Counter - LCD Display and battery
Supply and fixing of S.S Test Joint
Supply and fixing of Rust resistant non corossive 10 mm dia Copper Bonded Steel round conductor for Earth termination.
Supply and fixing of S.S Conductor Holder
Supply and fixing of Maintenance Free earthing with Copper rod of 17.2 mm
Supply and fixing of Cabinet type class 1 & 2 combined surge arrestor
Supply and fixing of Three Phase Imax - 50KA
K.C.JAYAKUMAR (BID ID -1126149)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid