MISC REPAIR REPLACEMENT OF OLD SWG PIPE LINE MANHOLES MH COVER SEPTIC TANK SLAB SOAKAGE WELL SLAB AND CLEANING OF SEPTIC TANK SOAKGE WELL AND SEWAGE LINE LINE DRAIN FLOORING PLASTERING PLINTH PROTECTION TILING AND PERIODICAL SERVICES IN CERTAIN BLDGS

Cleaning, removing all scale, dust, dirt and elgy using with wire/jute brush from inside of RCC/PVC tanks of capacity 500 Litres and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching powder solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black/white paint on white/black base on tank "Tank cleaned on ____ Dt_____". complete all as specified and directed.

All as item No 1 above but of capacity 1000 litres.

Cleaning of sewage line and connected manholes (any length) from manhole to manhole, manhole to septic tank septic tank to soakwell (n. exc 50 mtr) by roding and well flushing after cleaning and removing mud / sludge etc and burried it in pits and disposed off the same outside defence area complete all as specified for 150 mm bore of pipes.

Cleaning of sewage line and connected manholes (any length) from manhole to manhole, manhole to septic tank septic tank to soakwell (n. exc 50 mtr) by roding and well flushing after cleaning and removing mud / sludge etc and burried it in pits and disposed off the same outside defence area complete all as specified for 200 mm bore of pipes.

Blocking up the entry of manholes of any size depth and pumping out effluent dirty liquid and sludge from bottom of manholes including collecting sludge and dirty liquid into closed container and cleaning the manholes with fresh water after wards opening the inlet of manhole for re-use and removing the sludge to outside premises, complete all as specified and as directed.

Cleaning of blockage of WC /GullyTrap/Nahani Trap/Floor Ttrap or any other similar kind of items complete all as specified and directed.

M&L for Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide in soft/loose soil for drain pipes, manholes etc complete all as specified and directed.

The same as per serial item No. 7 above but depth exc 1.50 M and not exc 3.00 m complete all as specified and directed.

Returning filling in any type of soil including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing excavated materials exc 1.50 KM but not exc 5.00 KM and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Demolition of cement concrete bed and haunching and breaking up drain pipes SGSW set in cement mortar of the following dia.

200mm dia.

250 mm dia

M&L for concrete bed in P.C.C. 1:4:8 type D2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing complete all as specified and directed for the following dia of pipes.

200 mm dia.

250 mm dia

M/L for DWC (Double wall corrugated) HDPE Pipes laid in trenches including jointing accessories complete bed to level/gradient as directed for following sizes:-

200 mm dia.

250 mm dia

Demolition of brick work of any description built in cement mortar including all quoins, arches but excluding pre-cast articles etc complete all as specified and directed.

M&L for brick work with old size bricks (sub class 'B' bricks) straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

The same as per item No. 15 above, but except bricks.

Taking down cement plaster of any description from brick wall/concrete surface etc including making joints hacking for key srcubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete sufaces including finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked.

Demolition of Cement Concrete (Unreinforced) in ground floors and Pavings n exc 15 cm Thickness (below or above ground level) complete all as specified and directed.

M&L for plain cement concrete 1:3:6 Type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete for manholes, Septic tanks & drains and for similar work complete all as specified and directed.

M&L for plain Cement concrete 1:2:4 Type B0 using 12.5 mm graded stone aggregate as in coping benching and surface channel and for similar work including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel Upto 30 cm inner grith. using extra cement including forms moulds etc complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection/ flooring etc finishing even & smooth without using extra cement complete all as specified and directed.

M&L for precast RCC 1:2:4 Type B-1(using 20mm graded stone aggregate) as in manholes covers including form work etc set in CM 1:6 complete all as specified and directed.

S&F MS TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

The same as per item No 26 above but 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for flat rough finished surfaces of concrete.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe.

S&F PVC (SWR) 110 mm dia bore pipes single socketed in any length with rubber ring joints sealed with approved adhesive and fixed on wall,or in floor complete all as specified and directed. fixed to walls with brackets

The same as per item No. 31 above but 75 mm bore.

S&F PVC (SWR) bends/ shoes any radius of 110 mm dia

S&F PVC (SWR) bends any radius of 75 mm dia

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia

S&F PVC ( SWR ) single T equal or unequal of size 110 mm bore complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms complete all as specified and directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( using 20 mm graded stone aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic WC).

S&F in repair Vitreous China wash down water closet pan pedestal pattern white incl fixing bolts,include S&F white coloured plastic seat cover,CP brass jet nozzle with 600 long PVC pipe

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides .

S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F repair vitreous china urinals bowl type flat back, size 465 x 355 x 265 mm, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe.

S&F PTMT urinal spreader for fixing with 15 mm bore pipe complete all as specified and directed.

S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and directed.

S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed.

Dismantling of floor/walls tiles incl bedding but not backing and rubbish off permises complete all as specified and directed.

M & L for Coloured Non skid ceramic colour tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L for 10mm thick Lighft shade vitrified ceramic tiles in floors area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern etc of tiles complete all as specified & directed.

M&L for 10mm thick Light shade vitrified tiles in skitting, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement over and incl 10 mm thick rendering in cement mortar 1:4 as rough surface on vertical surface as backing coat of wall tiles complete all as specified & directed.

M&L for 350x250x7mm/ 450x350 x7mm (Repair as per site requirement) thick glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick rendering in cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick /30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 25 mm thick plain cement concrete (1:2:4), type B-1, using 20 mm graded stone aggregate as in floors including finishing the surface rough for laying finishes complete all as specified and directed.

M&L for cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn with cement mortar 1:1 for 150mm dia pipe complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) with PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) and surface finished even for 150mm dia pipe complete all as specified and directed.

M&L for preparation of old decorted plastered/ unplastered surfaces of walls of any description by washing, rubbing down and stopping of distemper and painted surfaces and applying one coat of Oil Bound distemper, white or tinned complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying two coats of distemper oil emulsion, white or tinned (change of colour as required) complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls of any description by washing, rubbing down and applying one coat of cement base paint complete all specified and directed.

M&L for preparation of old scrapped surfaces of walls of any description by washing, rubbing down and applying two coats of cement base paint complete as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated plastered/unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying one coat of white washing complete all as specified and directed.

All as per Item No 63 mentioned above but on ceiling surfaces.

M&L for preparation of old decorated plastered/unplastered surfaces of external walls of any description by washing, rubbing down and applying one coat of apex paint (weather coat) complete all as specified and directed.

Please Enable Macros to View BoQ information