DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE WORK FOR LOSS REDUCTION AT DISTRICTMEERUT AND BAGHPAT IN PsVVNL UNDER REVAMPED REFORMS-BASED AND RESULTS-LINKED, DISTRIBUTION SECTOR SCHEME

Armoured LT cabling in high loss area (LT line on 3.5Cx 50 sq.mm armoured cable)

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

Stone Pad (300x300x75mm)

LT Shakle Insulator 100x115 mm

D-Straps with Nuts and Bolts (Shackle Insulators)

Supply of LT XLPE armoured 3.5x50 Sq. mm. Cable

Erection of LT XLPE armoured 3.5x50 Sq. mm. Cable

Mid Span Jointing Sleeves (50 sq. mm)

Insulating Piercing Connector (16-150 sq.mm)

Insulation mastic tape (2inc X 10 feet).

Three Phase SMC Distribution Box with clamps and suitable lock and key arrangment

Single of Phase SMC Distribution Box with clamps and suitable lock and key arrangment

1x25 mm2 Armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Angle for vertical Arm (Type-A )as per approved drawing & TS

Angle for vertical Arm (Type-B) as per approved drawing &TS

Top clamp for Vertical arm( Type-A) as per TS

Top clamp for Vertical arm( Type-B) As per TS

Bottom clamp for vertical arm (Type-A) As per TS

Bottom clamp for vertical arm (Type-B) As per TS

Dismantling of existing overhead line and transportation of materials to PVVNL Store.

Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (8.5 Meter - PCC pole) as per approved Drawing and TS

Conversion of existing Service Cable to New Armoured Service cable 2Cx 6 sq.mm with all required accessories like lugs etc. (Complete Work in all respect) and Removing and shifting of Existing Material to client store

PVC 2C x 6 sq.mm. Armoured Cable for Service Connection

Conversion of existing Service Cable to New Armoured Service cable 4Cx 16 sq.mm with all required accessories like lugs etc. (Complete Work in all respect) and Removing and shifting of Existing Material to client store

PVC 4C x 16 sq.mm. Armoured Cable for Service Connection

Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables (3x50+1x35+1x16) sq.mm.

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

Stone Pad (300x300x75mm)

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Dead End clamp (Insulated)

Suspension clamps (Insulated)

Pole Clamps with I-Hook & nut & bolts for laying ABC

Holding clamp for round pole with with I-Hook & nut and bolt

Insulating Piercing Connector (16-150 sq.mm)

SMC LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections

Supply of LT ABC of 3x50+1x35+1x16 sq. mm

Erection of LT ABC of 3x50+1x35+1x16 sq. mm

1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

End cap for LT AB cable

PG Clamps

Concreting of PCC Pole/Support as per TS

Dismantling of existing overhead line and transportation of materials to PVVNL Store.

Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables (3x95+1x70+1x16) sq.mm.

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

Stone Pad (300x300x75mm)

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Dead End clamp (Insulated)

Suspension clamps (Insulated)

Pole Clamps with I-Hook & nut & bolts for laying ABC

Holding clamp for round pole with with I-Hook & nut and bolt

Insulating Piercing Connector (16-150 sq.mm)

SMC LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections

Supply of LT ABC of 3x95+1x70+1x16 sq. mm

Erection of LT ABC of 3x95+1x70+1x16 sq. mm

1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

End cap for LT AB cable

PG Clamps

Concreting of PCC Pole/Support as per TS

Dismantling of existing overhead line and transportation of materials to PVVNL Store.

Replacement of bare conductors/Damaged A.B. Cable with LT AB Cables (3x120+1x95+1x16) sq.mm.

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

Stone Pad (300x300x75mm)

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Dead End clamp (Insulated)

Suspension clamps (Insulated)

Pole Clamps with I-Hook & nut & bolts for laying ABC

Holding clamp for round pole with with I-Hook & nut and bolt

Insulating Piercing Connector (16-150 sq.mm)

SMC LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections

Supply of LT ABC of 3x120+1x95+1x16 sq. mm

Erection of LT ABC of 3x120+1x95+1x16 sq. mm

1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

End cap for LT AB cable

PG Clamps

Concreting of PCC Pole/Support as per TS

Dismantling of existing overhead line and transportation of materials to PVVNL Store.

Feeder bifurcation (11 KV line)

11kV New Line on 11 Mtr. ST Pole with ACSR DOG Conductor (Feeder bifurcation 11 KV Line)

11 Mtr. Long Steel Tubular pole 410 SP 55

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

11kV MS Danger Board with clamp, bolts & nuts

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Supply of ACSR Dog Conductor

Erection of ACSR Dog Conductor

P.G. Clamp for ACSR Dog

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Aluminium Jointing Sleeves

G.I. Barbed Wire

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 16 SWG

Eye Bolt

Turn Buckle

Red Oxide Paint

Aluminium Paint

11kV 'E' Bracket with N&B

11kV `F' Bracket with N&B

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers

GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer

GI Top Channel 125x65x6, 1525 mm long with clamp, bolts, nuts and washers

V-Type Cross arm for 11KV Line, 100x50x6 mm, GI

Cross arm holding Clamp with nuts & bolts

Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc.

Concreting of STP Pole/Support as per TS

11kV New Line on 8.5 Mtr. PCC Pole with ACSR DOG Conductor

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

Stone Pad (300x300x75mm)

V-Type Cross arm for 11KV Line, 100x50x6 mm, GI

Cross arm holding Clamp with nuts & bolts

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

11kV MS Danger Board with clamp, bolts & nuts

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Supply of ACSR Dog Conductor

Erection of ACSR Dog Conductor

P.G. Clamp for ACSR Dog

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Aluminium Jointing Sleeves

G.I. Barbed Wire

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 16 SWG

Eye Bolt

Turn Buckle

11kV 'E' Bracket with N&B

11kV `F' Bracket with N&B

GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers

Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc.

Concreting of PCC Pole/Support as per TS

11 KV Railway Crossing

11 Mtr. Long Steel Tubular pole 410 SP 55

11kV 3x185 mm2 XLPE Cable

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing)

G.I. Pipe 6" dia .

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

P.G. Clamp for ACSR Dog

11kV MS Danger Board with clamp, bolts & nuts

G.I. Barbed Wire

Aluminium Paint

Red Oxide Paint

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Concreting of STP Pole/Support as per TS

Railway Crossing Documentation, Land and Approval Fee etc. (Payment shall be done as per actual)

Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying of 33 KV & 11 KV XLPE cables

NHAI/State Highway Crossing

11 Mtr. Long Steel Tubular pole 410 SP 55

11kV 3x185 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing)

G.I. Pipe 6" dia .

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

P.G. Clamp for ACSR Dog/Raccoon

11kV MS Danger Board with clamp, bolts & nuts

G.I. Barbed Wire

Aluminium Paint

Red Oxide Paint

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Concreting of STP Pole/Support as per TS

NHAI/State highway crossing documentation, land charges and approval fee etc. (Payment shall be done as per actual)

Road Restoration (Foot Path )charges

Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying of 33 KV & 11 KV XLPE cables

Augumentation/ Reconductoring of 33 KV overhead line with Dog conductor

PCC Pole, 9.0 Mtr. Long

11 Mtr. Long Steel Tubular pole 410 SP 55

Stone Pad (300x300x75mm)

Supply of ACSR Dog Conductor

Erection of ACSR Dog Conductor

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire asper TS

Aluminium Paint

Red Oxide Paint

33kV MS Danger board with clamp and N&B

G.I. Barbed Wire

33kV 'F' Bracket with N&B

V-Type Cross Arm for 33KV line 100x50x6 mm, GI

Cross arm holding Clamp with nuts & bolts

33 KV Composite Polymer Pin Insulator with Nut and washers

33 KV Polymer Disc Insulator B&S type 70 KN

Disc Fitting B&S type 70 KN

33 KV Complete Stay Set with Clamp & Nut and Bolt & 33KV Guy Insulator as per approved drawing and TS

Stay Wire 7/8 SWG

Dismantling of existing overhead line and transportation of materials to PVVNL Store.

Concreting of PCC Pole/Support as per TS

Concreting of STP Pole/Support as per TS

Augmentation/Reconductoring of 11kV overhead Line with ACSR DOG Conductor

PCC Pole, 8.5 Mtr. Long

11 Mtr. Long Steel Tubular pole 410 SP 55

Stone Pad (300x300x75mm)

V-Type Cross arm for 11KV Line, 100x50x6 mm, GI

Cross arm holding Clamp with nuts & bolts

11kV `F' Bracket with N&B

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

Supply of ACSR Dog Conductor

Erection of ACSR Dog Conductor

11kV MS Danger Board with clamp, bolts & nuts

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

P.G. Clamp for ACSR Dog

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire asper TS

Aluminium Jointing Sleeves

G.I. Barbed Wire

Red Oxide Paint

Aluminium Paint

Guarding angle 75x75x6 mm, 2200 mm long with holding clamp, packing piece, nut & bolts etc.

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 16 SWG

Eye Bolt

Turn Buckle

Dismantling of existing overhead line and transportation of materials to PVVNL Store.

Concreting of PCC Pole/Support as per TS

Concreting of STP Pole/Support as per TS

11 KV Agriculture feeder segregation & feeder splitting due to overloading

11kV New Line on 8.5 Mtr. PCC Pole with ACSR Weasel Conductor

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

V-Type Cross arm for 11KV Line, 65x65x6 mm, GI Angle

Cross arm holding Clamp with nuts & bolts

11KV `F' Bracket with N&B

Supply of ACSR Weasel Conductor

Erection of ACSR Weasel Conductor

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

11KV MS Danger Board with clamp, bolts & nuts

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

PG Clamps

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Aluminium Jointing Sleeves

G.I. Barbed Wire

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 16 SWG

Eye Bolt

Turn Buckle

11kV 'E' Bracket with N&B

GI Top Channel 100x50x2240 mm. with Clamp and N&B and waashers

GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers

GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer

GI Top Channel 100x50x6, 1525 mm long ,with clamp, nut,bolt and washer

Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc.

Concreting of PCC Pole/Support as per TS

New LT Line on ACSR Weasel Conductor on 8.5 Mtr. PCC Pole

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

LT clamp with nut and bolt for PCC pole

LT Shakle Insulator 100x115 mm With Nut and Bolt

Supply of ACSR Weasel Conductor

Erection of ACSR Weasel Conductor

Aluminium Jointing Sleeves

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Concreting of PCC Pole/Support as per TS

Construction of new 100 KVA, 11/0.433kV Distribution Transformer S/S

11/0.44 kV 100 KVA Transformer (Level-I) as per specified in T.S.

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Channel 100x50x2240mm (For TPMO,LA and Fuse set)

Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300mm (Tee-off) with clamp & Nut bolts

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

11kV TPMO complete set

11kV DO Fuse Set (3 Phase)

11kV Lightening Arrestor

G.I. Barbed Wire

11kV MS Danger Board with clamp, bolts & nuts

SMC Distribution box as per technical specifications for 3 Ph 100 KVA DTR

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per TS

Aluminium L-Piece of size 400x60x10 mm for LT bushing rod of transformer

LT PVC Cable 3.5x150/70 Sq.mm.

ACSR Weasel Conductor

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

GI Strip 25x3 mm

GI Angle 100x50x2028mm (For Distribution box))

Al. Crimping lugs 150 sq.mm.

Al. Crimping lugs 70 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

Concreting of PCC Pole/Support as per TS

Construction of new 63 KVA, 11/0.433kV Distribution Transformer S/S

11/0.44 kV 63 KVA Transformer (Level-I) as per specified in T.S.

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Channel 100x50x2240 mm (For TPMO,LA and Fuse set)

Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300mm (Tee-off) with clamp & Nut bolts

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

11kV TPMO complete set

11kV DO Fuse Set (3 Phase)

11kV Lightening Arrestor

G.I. Barbed Wire

11kV MS Danger Board with clamp, bolts & nuts

SMC Distribution box as per technical specifications for 3 Ph 63 KVA DTR

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe)

Aluminium L-Piece of size 400x60x10 mm for LT bushing rod of transformer

LT PVC Cable 3.5x70/35 Sq.mm.

ACSR Weasel Conductor

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

GI Strip 25x3 mm

GI Angle 100x50x2028mm (For Distribution box))

Al. Crimping lugs 70 sq.mm.

Al. Crimping lugs 35 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

Concreting of PCC Pole/Support as per TS

Construction of new 25 KVA, 11/0.433kV Distribution Transformer S/S

11/0.44 kV 25 KVA Transformer (Level-I) as per specified in T.S.

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Channel 100x50x2240mm (For TPMO,LA and Fuse set)

Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300mm (Tee-off) with clamp & Nut bolts

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers

11kV TPMO complete set

11kV DO Fuse Set (3 Phase)

11kV Lightening Arrestor

G.I. Barbed Wire

11kV MS Danger Board with clamp, bolts & nuts

SMC Distribution box as per technical specifications for 3 Ph 25 KVA DTR

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per TS

Aluminium L-Piece of size 400x60x10 mm for LT bushing rod of transformer

LT XLPE insulated unarmoured 4x25 Sq. mm. Cable

ACSR Weasel Conductor

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

GI Strip 25x3 mm

GI Angle 100x50x2028mm (For Distribution box))

Al. Crimping lugs 25 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

Concreting of PCC Pole/Support as per TS

Installation of 11 KV Outgoing VCB for Feeder Segreration

11KV Outgoing CTR 400/200/5A 350 MVA

11kV 3x185 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

Heat Shrinkable indoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

11 Mtr. Long Steel Tubular pole 410 SP 55

GI Top Channel 100x50x2240 mm. with Clamp and N&B

11 KV Polymer Disc Insulator B&S type 70 KN

Disc Fitting B&S type 70 KN

11 KV Composite Polymer Pin Insulator with Nut and washers

P.G. Clamp for ACSR Dog/Raccoon

11kV 'E' Bracket with N&B

11kV MS Danger Board with clamp, bolts & nuts

11kV Lightening Arrestor

G.I. Barbed Wire

Aluminium Paint

Red Oxide Paint

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

GI Strip 50x6 mm

G.I. Pipe 6" dia .

Laying of 11 KV Cable including cost of Sand & Bricks

Concreting of STP Pole/Support as per TS

Control Room Extension

Extension of existing substation control room building,Control Room size 6x6 mtrs.( as per annexure attached in tender documents.)

11 KV Railway Crossing

11 Mtr. Long Steel Tubular pole 410 SP 55

11kV 3x185 mm2 XLPE Cable

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing)

G.I. Pipe 6" dia .

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

P.G. Clamp for ACSR Dog/Raccoon

11kV MS Danger Board with clamp, bolts & nuts

G.I. Barbed Wire

Aluminium Paint

Red Oxide Paint

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Concreting of Pole/Support as per TS

Railway Crossing Documentation, Land and Approval Fee etc. (Payment shall be done as per actual)

Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying of 33 KV & 11 KV XLPE cables

NHAI/State Highway Crossing

11 Mtr. Long Steel Tubular pole 410 SP 55

11kV 3x185 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

HDPE Pipe for Cable laying (Pipe to be laid by HDD Method) (For Railway Crossing /Road Crossing)

G.I. Pipe 6" dia .

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Angle 65x65x6 mm, 2700 mm long bracing complete with 4 clamps, Nut, bolt and washers

11 KV Polymer Disc Insulator B&S type 45 KN

Disc Fitting B&S type 45 KN

P.G. Clamp for ACSR Dog/Raccoon

11kV MS Danger Board with clamp, bolts & nuts

G.I. Barbed Wire

Aluminium Paint

Red Oxide Paint

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Concreting of Pole/Support as per TS

NHAI/State highway crossing documentation, land charges and approval fee etc. (Payment shall be done as per actual)

Road Restoration (Foot Path )charges

Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying of 33 KV & 11 KV XLPE cables

Requirement of Extra AB Cable for New additional Ckt at DTs

Construction of New LT Line on (3x50 + 1x35 +1x16)sq. mm LT ABC Cable

PCC Pole, 8.5 Mtr. Long

11 Mtr. Long Steel Tubular pole 410 SP 55

Stone Pad (300x300x75mm)

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Dead End clamp (Insulated)

Suspension clamps (Insulated)

Pole Clamps with I-Hook & nut & bolts for laying ABC

Insulating Piercing Connector (16-150 sq.mm)

SMC LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections

Supply of LT ABC of 3x50+1x35+1x16 sq. mm

Erection of LT ABC of 3x50+1x35+1x16 sq. mm

1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

End cap for LT AB cable

PG Clamps

Concreting of PCC Pole/Support as per TS

Concreting of STP Pole/Support as per TS

Construction of New LT line on (3x95 + 1x70 +1x16)sq. mm LT ABC Cable

PCC Pole, 8.5 Mtr. Long

11 Mtr. Long Steel Tubular pole 410 SP 55

Stone Pad (300x300x75mm)

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Dead End clamp (Insulated)

Suspension clamps (Insulated)

Pole Clamps with I-Hook & nut & bolts for laying ABC

Insulating Piercing Connector (16-150 sq.mm)

SMC LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections

LT ABC of 3x95+1x70+1x16 sq. mm

LT ABC of 3x95+1x70+1x16 sq. mm

1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

End cap for LT AB cable

PG Clamps

Concreting of PCC Pole/Support as per TS

Concreting of STP Pole/Support as per TS

Construction of New LT line on (3x120 + 1x95 +1x16)sq. mm LT ABC Cable

PCC Pole, 8.5 Mtr. Long

11 Mtr. Long Steel Tubular pole 410 SP 55

Stone Pad (300x300x75mm)

Earthing coil (coil of 115 turns of 50 mm dia and 2.5mtrs lead of 4.0mm GI wire) with 6 SWG GI Wire as per TS

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Dead End clamp (Insulated)

Suspension clamps (Insulated)

Pole Clamps with I-Hook & nut & bolts for laying ABC

Insulating Piercing Connector (16-150 sq.mm)

SMC LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections

Supply of LT ABC of 3x120+1x95+1x16 sq. mm

Erection of LT ABC of 3x120+1x95+1x16 sq. mm

1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

End cap for LT AB cable

PG Clamps

Concreting of PCC Pole/Support as per TS

Concreting of STP Pole/Support as per TS

Additional items that may be required for completion of work

3x120 sq. mm 11 kV AB Cable

11kV Polymer Disc Insulator with Fitting for 11 KV ABC

11kV Polymer Disc Insulators with I-Hook

Erection & concreting of Extra Stud Pole complete with clamps,

GI Channel 100 x 50 x 3200 mm unit with mounting clamps, Nut, Bolt and washers

GI Angle 50 x 50 x 6 mm, 3200 mm long with 2 Nos. clamps, required Nut, Bolt and washers

GI angle 65x65x6mm, 450 mm bracing set complete with clamps, Nut, bolt and washers

LT XLPE insulated unarmoured 1x50 Sq. mm. Cable

Heat Shrinkable outdoor type termination kit suitable for 33kV XLPE 3x300 Sq. mm. cable size

Heat Shrinkable 1 ph. termination kit outdoor for 11 kV 3x120 Sq. mm. AB Cable

Laying of 3x300 sq. mm. 33 KV XLPE Insulated Cable underground in HDPE Pipe or trenches ( For Railway/Road Crossing)

Drilling & Laying of HT Underground Cable using HDD method without using HDPE Pipe

Loop Guard complete, 3-Phase

Spacers LT PVC

Mid Span Jointing Sleeves (95 sq. mm)

LT Insulation Piercing Connectors of 95/50 sq. mm - 70/35 sq. mm (For messenger wire jumpering & energizing DB neutral)

On/Off switch for street light connections

Mounting of cable on DP structure(including loop and riser)

Height raising channel 100X50,2240 mm long

Back clamp for height raising channel holding clamps with bolts & nuts

Cable jointing kit straight through(3X185 sqmm)

Cable jointing kit straight through(3X300 sqmm)

Extra prefabricated GI items Like clamp,channel, angle with nut & Bolt

Cable Route Marker

Tree Cutting

ACSR Rabbit Condutor

9 Meter STP Pole

13 Meter STP Pole

Rearrangement for connecting New 11 KV Switchgear with existing 11 KV Switchgears (Adopter Panel)

Al binding wire

Sign Borad

Road Restrotion (WBM )

NCC LIMITED

M/s. Ashoka Buildcon Ltd

LARSEN AND TOUBRO LIMITED