Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹34.7 CrAccepted-AOC | ₹34.7 Cr | L-1 | Accepted-AOC L-1 Bidder. |
| 2 | L-2₹42.0 CrRejected-Finance | ₹42.0 Cr | L-2 | Rejected-Finance Other than L-1 Bidder. |
| 3 | Rejected-Technical | - | - | Rejected-Technical NOT VALIDATED |
| 4 | Rejected-Technical 244 22 ONKAR NAGAR B TRI NAGAR TRI NAGAR NEW DELHI 110035 NORTH WEST DELHI DELHI 110035 INDIA UDYAM DL 06 0048538 | NORTH WEST DELHI | DELHI | 110035 | - | - | Rejected-Technical NOT VALIDATED |
Tender Value
₹17.3 Cr
EMD Value
₹11.9 L
Closing Date
9 Dec 2019, 6:00 pmClosed
HQ CE SILIGURI ZONE
HQ CE SILIGURI ZONE, PO SALUGARA, DIST JALPAIGURI, PIN 734008 WB
COMPLETION OF INCOMPLETE WORK OF PROVN OF OTM ACCN (PHASE-II) AT GACHHAM
2019_MES_277344_1
98713-GACH-SZ-E8 (CA No. CESZ/GACH/04 OF 2019-2020
Open Tender
Civil Works
820 days
GACHHAM
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,000
GE 859 EWS
₹11.9 L
Yes
4 Feb 2020
26 Aug 2019
10 Dec 2019
26 Aug 2019
9 Dec 2019
20 Nov 2019
Amount
BUILDING WORKS (Sch 'A' PART-I)
Completion of incomplete work of Block of Trg/Simulator Room Single Storey with all fittings and fixtures complete all as specified and as shown on drawings
Construction of a Block of Explosive Store including plinth protection, natural angle traverses (NAT) with retaining wall, Ramp, Storm water drain and Earth Filling with all fittings and fixtures complete all as specified and as shown on drawings
Completion of incomplete work of a Block of SM Barrack for 26 Hav's and 223 OR's Triple Storey with all fittings, fixtures and built in furniture items complete all as specified and as shown on drawings.
Completion of incomplete work of a Block of Single JCO Accn Single Storey with all fittings, fixtures and built in furniture items etc. complete all as specified and as shown on drawings.
Completion of incomplete work of a Block of Single Officer Accn 01 LT Single Storey with all fittings and fixtures complete all as specified and as shown on drawings.
Completion of incomplete work of a Block of Single OfficerAccn 02 Capt Single Storey with all fittings and fixtures complete all as specified shown on drawings.
Completion of incomplete work of a Block of Officers Mess Double Storey with all fittings, fixtures and built in furniture items etc. complete all as specified and as shown on drawings
Completion of incomplete work of a Block of Servant Qtr 08 Nos Double Storey with all fittings, fixtures and built in furniture items etc. complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Servant Qtr 03 Nos Double Storey with all fittings, fixtures and built in furniture items etc. complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Servant Qtr 02 Nos Single Storey with all fittings, fixtures and built in furniture items etc. complete all as specified and shown on drawings.
Completion of incomplete work of ORs Institute Single Storey including ramp with all fittings and fixtures complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Family Welfare Centre Single Storey including pavet area with all fittings, fixtures and built in furniture items etc. complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Education Building Single Storey including ramp with all fittings and fixtures complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Trademen Shop Single Storey including paved area with all fittings, fixtures and built in furniture items etc. complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Storage Accn and Unit Shop Single Storey including ramp with all fittings and fixtures complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Covered Accn for Truck 01 Tonne 01 No including Apron with all fittings and fixtures complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Covered Accn for Bus 01 No including Apron with all fittings and fixtures complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Covered Accn for 11 Nos Jeep including Apron with all fittingsand fixtures complete all as specified and shown on drawings.
Completion of incomplete work of a Block of Covered Accn for 09 Nos Truck of 3 Tonne including Apron with all fittings and fixtures complete all as specified and shown on drawings.
Completion of incomplete work of a Block of MT Store and Battery Charging Room including Ramp with all fittings and fixturescomplete all as specified and shown on drawings.
Completion of incomplete work of a Repair Bay (03 Nos) with Inspection Pit including Apron with all fittings and fixtures complete all as specified and shown on drawings.
Construction of 15500 Gallons Capacity SMC Panel Tank with 2.0 m hollow steel section staging with all fittings and fixtures complete all as specified and shown on drawings.
Construction of 27 m small Arm Range with all fittingsand fixtures complete all as specified and shown on drawings.
Construction of Sentry Box with all fittings and fixtures complete all as specified and shown on drawings.
Construction of Washing Platform complete all as specified and shown on drawings.
Construction of Ramp (Double) complete all as specified and shown on drawings.
Construction of Garbage Bin complete all as specified and shown on drawings.
Construction of PCC Block Septic Tank Type D-1, 10 users capacity with all fittings complete all as specified and shown on drawings.
Construction of Soakage Well 1.2 metre dia & 3 M depth complete all as specified and shown on drawings.
Construction of Steel Gate 5.50 Metre Span with RCC Posts and 3.1 Metres Height with Wicket Gate complete all as specified and shown on drawings.
Construction of Valve Pit Type 'A' of PCC Block Masonry and of Size 90 cm x 90 cm x 90 cm (inner dimension) complete all as specified and shown on drawings.
Construction of Valve Pit Type 'A' of PCC Block Masonry and of Size 45 cm x 45 cm x 45 cm (inner dimension) complete all as specified and shown on drawings.
Construction of RCC Culvert 1.5 M Span complete all as specified and shown on drawings.
Construction of Static Water Tank 225 KL with all fittings complete all as specified and shown on drawings.
Sub total
EXCAVATION & EARTHWORK FOR SITE CLEARANCE AND AREA DEVELOPMENT, OTHER SCHEDULES (EXCEPT SCH 'A' PART-I) (Sch 'A' PART-II)
Lump sum price worked out by the Contractor for “EXCAVATION & EARTHWORK FOR SITE CLEARANCE AND AREA DEVELOPMENT, OTHER SCHEDULES (EXCEPT SCH 'A' PART-I)” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 82,68,068.80 inserted by the MES in Schedule ‘A’ Part-II.
INTERNAL WATER SUPPLY (Sch 'A' PART-III)
Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY (Sch 'A' PART-III)” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2,41,869.00 inserted by the MES in Schedule ‘A’ Part-III.
INTERNAL ELECTRIFICATION (Sch 'A' PART-IV)
Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 17,49,449.10 inserted by the MES in Schedule ‘A’ Part-IV.
ROAD / PATH / CULVERT (Sch 'A' Part-V)
Lump sum price worked out by the Contractor for “(ROAD / PATH / CULVERT)” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 15,07,962.00 inserted by the MES in Schedule ‘A’ Part-V.
SEWAGE DISPOSAL (Sch 'A' PART-VI)
Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 19,36,823.80 inserted by the MES in Schedule ‘A’ Part-VI.
AREA DRAINAGE (Sch 'A' Part-VII)
Lump sum price worked out by the Contractor for “(AREA DRAINAGE)” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 4,96,604.80 inserted by the MES in Schedule ‘A’ Part-VII.
SECURITY WALL, FENCING & GATE (Sch 'A' Part-VIII)
Lump sum price worked out by the Contractor for “(SECURITY WALL, FENCING & GATE)” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 9,21,538.98 inserted by the MES in Schedule ‘A’ Part-VIII.
RETAINING WALL (Sch 'A' PART-IX)
Lump sum price worked out by the Contractor for “(RETAINING WALL )” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,84,17,040.50 inserted by the MES in Schedule ‘A’ Part-IX.
LIGHTNING PROTECTION (Sch 'A' Part-X)
Lump sum price worked out by the Contractor for “(LIGHTNING PROTECTION)” as listed in Schedule ‘A’ Part-X. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 37,320.60 inserted by the MES in Schedule ‘A’ Part-X.
EXTERNAL WATER SUPPLY (Sch 'A' PART-XI)
Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY )” as listed in Schedule ‘A’ Part-XI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 5,54,635.10 inserted by the MES in Schedule ‘A’ Part-XI.
EXTERNAL ELECTRIFICATION (Sch 'A' Part-XII)
Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION )” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 13,50,158.50 inserted by the MES in Schedule ‘A’ Part-XII.
MISCELLANEOUS B/R & E/M ITEMS (Sch 'A' PART-XIII)
Fixing only geyser 25 liters capacity on wall with nuts and bolts (botls grouted) and surface finished with cement mortar 1 : 4 including testing, connection with inlet, outlet pipe, elctric connection complete all as specified and as directed. NOTE :- Geyser will be issued under Schedule 'B' free for fixing only.
S&F fluorescent tube light fitting 2x 36w including 2x36 watt CFL lamp made of aluminium housing with high gloss imported aluminium reflector, neoprene rubber gasket, stainless steel toggles, UV stablised acrylic cover and fixed on pole with 40mm bore light grade GI pipe (bend to shape) bracket 1.5 mtr long complete with MS flat iron clamp ( clamp shall be 50 x 6mm MS flat) nuts, bolts and washers incl painting the clamps with two coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed. Make : Model No- BJSLA236FTL Bajaj or equivalent model of make list as given in Appdix "B".
S&F of security luminaires of compact fluorescent lamp (CFL) light fitting, 1x 36w including 1x36 watt CFL lamp made of aluminium housing with high gloss imported aluminium reflector, neoprene rubber gasket, stainless steel toggles, UV stablised acrylic cover and fixed on pole with 40mm dia light grade GI pipe (bend to shape) bracket 1.5 mtr long complete with MS flat iron clamp ( clamp shall be 50 x 6mm MS flat) nuts, bolts and washers incl painting the clamps with two coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed. Make : Model No- BJSLA 136CFL of Bajaj or equivalent model of make list as given in Appdix "B".
S&F of compact fluorescent lamp (CFL) fitting, 2x 36 Watt, 230v, decorative wall mounting type with CRCA steel housing with opal acrylic diffuser and decorative end plate with lamp holders, connector block, etc. complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. MAKE : Bajaj Cat No BSP 236CFL or equivalent make as per Appendix 'B'
Supply & installation refrigerator electric driven single phase capacity 286 liters frost free, minimum four star rated and complete all as specified and as directed, MAKE : Model No GL 328LAGH of LG or equivalent model of make specified in Appendix 'B'.
Supply and fixing voltage stablizer for automatic operation, single phase with neutral, air cooled indoor type and designed for input voltage variation between 170 voltage to 250 volt with output voltage stabilized at 230 volt with accuracy of +/-2.5% and capacity of 0.5 KVA complete all as specified and as directed.
Supply and fixing cast iron air release valve with drilled flanged ends, with two air outlets of 150mm bore with nuts, bolts and washers complete all as specified and as directed.
Supply, installation, testing and commissioning of electrically operated chemical dosing pump capacity 5 Litres/hour, high perssure single head gear motor adjustable dosing pump with accessories including lead tubing, connecting nuts, injunction check value, clay weight and ferules complete for chlorination complete all as specified and as directed.
Supply and fixing cast iron reflux valve 150mm bore (dia) with bye pass arrangment including necessary fixing arrangments such as gaskets, Mild steel nuts, bolts, washers, etc. complete all as specified and as directed.
Supply, laying and jointing of ductile iron pipes with flanged ends suitable for push on rubber joint centrifugally cast, class (K-9), inner side cement lining and outer side black bitumen coating and any length, laid in trenches of 150mm bore pipe including jointing material with nuts and bolts with ISI marked complete all as specified complete.
Supply, installation, testing and commissioning of centrifugal pumping set discharge capacity 790LPM at 312m head with bronze impeller with energy efficieny-2 induciton motor conforming to IS : 12615 suitable for 415V 3 phase 50 cycle AC supply suitable for drinking water including steel base frame and all accessories complete all as specified and as per manufacturer's specifications.
M & L for cutting existing GI pipes 80mm dia for insertion of new Tee 80X80X80mm incl Tee for branches connection all as specified and directed.
Supply and fixing of integral flood light luminaires fittings 400 watt metal halide with 1 x 400 watt metal halide lamp, heat resistant and toughened glass cover, built-in-control gear, faceted, anodised aluminum reflector, stainless steel toggles etc. all as IP54, IP33 or manufacturers instruction and fixed on pole with GI bracket complete all specified and as directed. Make : Model No BGEMFS400mh COMPLETE of Bajaj or Equivalent model of make list as given in Appx 'B'.
Laying, testing and commissioning XLPE insulated screened, PVC bedded, armoured electric cable 1100 volts grade 3.5 core 185 Sqmm complete all as specified and as directed.
Laying, testing and commissioning XLPE insulated screened, PVC bedded, armoured electric cable 1100 volts grade 2 core 10 Sqmm complete all as specified and as directed.
Laying,testing and commissioning XLPE insulated screened, PVC bedded, armoured electric cable 1100 volts grade 2 core 16 Sqmm complete all as specified and as directed.
Laying, testing and commissioning XLPE insulated screened, PVC bedded, armoured electric cable 1100 volts grade 2 core 25 Sqmm complete all as specified and as directed.
Laying, testing and commissioning XLPE insulated screened, PVC bedded, armoured electric cable 1100 volts grade 4 core 16 Sqmm complete all as specified and as directed.
Laying, testing and commissioning XLPE insulated screened, PVC bedded, armoured electric cable 1100 volts grade 4 core 25 Sqmm complete all as specified and as directed.
Laying, testing and commissioning XLPE insulated screened, PVC bedded, armoured electric cable 1100 volts grade 3.5 core 35 Sqmm complete all as specified and as directed.
Laying, Testing and commissioning XLPE insulated screened, PVC bedded, armoured electric cable 1100 volts grade 3.5 core 50 Sqmm NOTE FOR ITEM NO 13.18 to 13.25:- LT XLPE cable will be issued under Schedule 'B' as Free for laying
NOTE FOR ITEM No. 13.18 to 13.25 :- LT XLPE cable will be issued under Schedule 'B' as Free for laying
Supply, installation, testing and commissioning of discharge capacity 2 cum/hour for water treatment plant of treating raw water nd bringing the concentrtin to acceptable drinking water standard as per IS 10500/WHO including RCC sedimentation tank of internal size 5m x 2.5 m x 1.5 m complete with necessary equipment i.e chemical dosing system, sludge recycling system, UF filtration system etc, and including adequate size piping, vaves and other stadard accessory etc complete all as specified shown on drawing interlia compriding of the following system/equipment :- (a) PVC raw water tank of capacity 10000 liters with 510 mm manhole mounted on suitable PCC foundation as per manufacture's specifications:01 No (b) Pressure sand filter and Fibre reinforced Plastic (FPR) of capacity 4 cum/hr of filter 480mm dia (minimum) and 190 mm height (minium) na dincluding all necessary equipment, frntal piping, pneumatic valves, suitable supports for mounting, oressure gauge, orifice plate etc complete all as specified :- 01 No (c) Acarbon filter of fibe re-inforced Plastic (FRP) capcity 4 cum/hr dia of filter 630 mm dia 9minimum) and 1860 mm height (miimum) and including all necessary equipment, frontal ping, pneumatic valves, suitable supports for mounting, pressure guage orifiece plate etc complete all as specified:- 01 No Item continued as 13.28
(d) Ultra filtration system of capacity 2 cum/hour of Uf membranes 8" (100KMWCO), 40 nos elements and average recover 90% with Norit membranes installed in MS painted skid with PP/SS Basket Strainer, Control panel PLC based, set of valves, PVC/SS pipe work and standard flow meters, complete with followings:- (i) Supplying, errecting, commissioning and testing Alum Chemical dosing pump with agitator of suitable capaicty. The plunger dia of the doser shall be 19mm, capacity 9.25 GPH, max stroke-50mm, motor 0.5 HP and working pressure of 7 Kg/cm2 all as specified and as directed- 01 No. (ii) Chlorine solution dosing system of suitable type dosing pumps with pipe lines and with 250 ltrs FRP Tank & Metering pump having frequency 100 stroke per minutes discharge capacity at max bck pressure 6.31 ph shalla as directed- 01 No (iii) Polymer Dosing system of suitable type dosing pump, 250 ltr FRP tank having maximum frequency 100 stroke, premises discharge capacity of tank at max back pressure 6.31ph all as specified and as directed -01No (iv) Lime dosing system with tank, dissolved basket, slow speed agitator and open impeller pump) all as specified and as directed-01 No Item Continued as 13.29
(v) Back wash/Feed pumpfor MGF filter of cap 25m/hour all as specified and as directed-01 No. (e) 01 No Ultra violet system of cap 2 cum/hr with inlet and outlet connection of 50mm dia complete all as specified and directed -01 No (f) Interconnecting pipe work, valve & fittings of PVC 01 Lot. NOTE :- (i) Necesssary foundation for installation of plant shall be provided as per manufracturer's recommendation and same shall be incl in the unit rate quoted. (ii) Raw water and treated water shall be got tested from national test house as perIS 10500 and the rate quoted shall be inclusive of testing charge. (iii) The plants shall be got commissioned from manufactures and a certificate to this effect shall be produced from manufactures to GE.
Supply, installation, testing and commissioning of central sewage plant sutiable for scondary treatment of minimum cap 150 cum/day of MBBR tech of approved make consisting of flowing media as per manufracturer's recommendation, comprising of following eqpt/accessories, making all necessary electric connection from existing source pipe line, all civil woeks wuch as foundation, plinth protection etc complete as per manufracturer's specificaion, complete all as specified shown on drawing:- (a) Lamella Plate Settler FRP coated of size not less than 1440x1750x4mm thick -22 Nos (b) Reactor media as per manufractuerer specification of qty min 6,67m3. (c) HDPE/PVC diffusers 16 Nos of size not less than 1000mm-02 sets. (d) Air blowers as per specificattion -02 Nos Make - Kay/Enerest (e) Filter feed pump as per specification -02 No (01 working +01 stand by) (f) Chlorine dosing pump of cap 4.00 LPH at a pressure of 3.5 kg/cm2 incl HDPE chlorine dosing tank of cap 200ltrs -01 No make -Kirlosker/Johnson/Declibec/Milton Roy. (g) MCC panel, cabling, cable tray, earthing as epr manufracturere's recommendation and as directed. (h) Shed for MCC panel, Pump Motor and Dosing Pumps etc as per manufactures recommendation and as directed.
Sub total
DEMOLITION & DISMANTLING (Sch 'A' Part-XIV)
Lump sum price worked out by the Contractor for “(DEMOLITION & DISMANTLING )” as listed in Schedule ‘A’ Part-XIV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,33,772.60 inserted by the MES in Schedule ‘A’ Part-XIV.
M/S GLOBAL ROYAL CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid