Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.9 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹45.8 L+₹47,890 (1.06%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹47.0 L+₹1.7 L (3.72%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹49.0 L+₹3.7 L (8.12%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹49.0 L+₹3.7 L (8.15%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹56.9 L
Closing Date
9 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-29/2022-2023 SPL REPAIR TO ORS GOVT MD ACCN QTR NO 3837 TO 3848 SECTOR F AT CHANDIMANDIR
2022_MES_529226_2
GE/CHM-29/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
CHANDIMANDIR
9 documents required · 9 mandatory
₹500
Garrison Engineer
Yes
10 Sept 2022
16 Jul 2022
16 Aug 2022
16 Jul 2022
9 Aug 2022
26 Jul 2022
Amount
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete as specified and directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid in any mortar complete all as specified and directed.
Demolition of reinforced cement concrete any thickness in any position complete all as specified.
Dismantling of cast iron pipes with all fittings and fixing acessories, jointed in cement mortar 75-100 mm bore, at any location, complete all as specified.
Demolition & breaking of AC rain water 100mm dia bore set in cement mortar completed all as specified & directed.
Dismantling of posts or struts of RCC) any section incl taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed
Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
Providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in mass concrete etc., complete all as specified and as directed
40mm thick PCC 1:2:4 type B-1 (using 20m graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.
Reinforced cement concrete, type A-1 (1:1½:3), using 20 mm graded stone aggregates as in slabs supported on walls, beams and Chajja, columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall etc. and the like of thickness not more than 250 mm by electric drilling machine and making good complete, all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
All as per serial item No 15 herein before but except bricks
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified.
Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutter of any description n.exc 1 Sqm each complete all as specified & directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified & directed.
Supply and fix, in repair powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminum Three track sliding window decided by Engineer-in-Charge with and including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium beading fittings suitable handle (1 No) and self locking arrangement complete all as shown on drawing, specified and directed. Note: Glass panes and wire gauge shall be measured & paid separately under respective items.
Glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made plain framed panelled shutters, hammer marked, 35mm thick (with two panel) of 2nd class hard wood with lock rail and panels of 9mm thick commercial ply duly hammer marked. The size of rail & style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated including a shop coat of pink primer complete all as specified & directed.
Supply and fix solid PVC frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogenous fine cellular structure density 750 Kg/Cum having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.
Supply and fix factory made solid PVC board 20-22mm thick, interior grade , shutter of any colour as in cupboard shutter, shelf, sag free, thermal and electricity insulated, light weight, wrap free , impact resistant, fire resistant, termite resistant, chemical resistant and smell free complete all as specified and directed.
Solid PVC board 12mm thick, in repair, of any colour as in kitchen cupboard shutter, shelves, sag free, thermal and electricity insulated, light weight, wrap free , impact resistant, fire resistant, termite resistant, chemical resistant and smell free complete all as specified and directed.
Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.
Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.
Aluminium, anodized barrel tower bolts of extruded section and fixed, 100 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.
Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.
Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
Aluminium handles, cast type anodized of size 100 mm, ISI marked, complete all as specified.
Hasp and staple 100mm of aluminimum anodised with hinges including bolt to hinge plate and fixed with screws complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.
Drapery rod (conduit) of dia not less than 20mm having a corrugated virgin PVC extrusion on its surface and ABS plastic rings and finials of approved shed with standard MS powder coated brackets, fixed to walls with rawl plugs and steel screws fixed as in repair complete all as specified and directed.
Mild steel high strength deformed TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Mild steel high strength deformed TMT bars bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified & directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted orForged into spikes,Framed guard bars, barred iron doors, ladders,Framed balusters, walk ways, raillings,Frame work of water tanks and similar work confirming toFe-290 grade E-165, complete all as specified & directed by Engineer-in-charge.
Factory made pressed steelFrames, conforming to IS, having profile 105 mm x 60 mmFor doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessaryFixing lugs, butt hinges, lock strike plate, etc, complete, as specified and directed.
Factory made pressed steel Frames, conforming to IS, having profile 125 mm x 60 mmFor doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessaryFixing lugs, butt hinges, lock strike plate, etc., complete, as specified, supplied andFixed complete all as specified and directed.
PCC (1:2:4) type B-0, using 20mm stone aggregate as in pressed steel frame complete all as specified and directed by Engr-in-Charge.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar all as specified & directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
Cutting out cracks to V section to 25 mm depth in existing roofs or terracing, cleaning out, wetting,and painted with shalitex primer and filled with sealing compound , tarplastic of STP or equivalent. complete all as specified and directed.
PCC 1:3:6 type C1 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges complete all as specified and directed.
Rendering 15mm thick (average thickness) rendering on roof surfaces inclduing flashings and junction of oaraoets etc finished even and fair in cement mortar 1:4 using wate proofing compound as per manufacturer's instruction after brushing cement slurry complete all as specified and directed
Five layered reiforced with non woven polyester matt, 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing not less than 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous resistance aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
Supply only integral water proofing compound ISI Marked.
Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in Cement and Sand mortar 1:3 complete all as specified and directed
Supply and fix as factory made cement concrete tiles 250mm x 250mm x 22mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over 15mm thick screed bed in cement mortar 1:4, mixed with and including WPC (mixed as per manufacturer instruction) and joints grouted and pointed in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal of excavated material to distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.
Machine cut Baroda Green stone slab flooring 16-18 mm thick, area of each slab exceeding 0.30 sq.m, (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, as in kitchen platform, step, jambs, pillars and like, complete all as specified and directed.
All as per serial item No 56 hereinbefore but on vertical surfacs as on skirting complete over and including 15mm thick scree bed in cement mortar 1:4
Rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Demolition of cement Concrete of any description and in any position not otherwise specifically (in sunken portion) directed complete all as specified by Engr-in-Charge.
Providing cement concrete in roof kerbs or mud stops, rounded or cmamfered on edges type B-0 1:2:4 using 12.5mm graded stone aggregate all as specified.
Applying waterproof coating in two layers with brushes using Dr Fixit Pidifin 2K (grey powder +white liquid), mix ration 1:1.5 (by volume) or equivalent make specified in Appx 'B' complete all as specified and directed.
Providing protection layer applying 15mm thick cement plaster in cement mortar 1:4 (cement coarse sand) admixing Dr Fixit pidiproof LW @ 200ml per 50Kg cement bag or equivalent make specified in Appx 'B' all as specified and directed.
Hard core of gauge not exc 63 mm deposited spread and lavelled in layers n-exc 25 cm watered & rammed to a true surface with broken bricks complete all as specified.
Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate 75mm thick for floor admixing Dr Fixit pidiproof LW @ 20ml per 50 Kg cement bag including top coating using Dr Fixit URP, mix ration 1:1.5 (URP : cement) or equivalent make specified in Appx 'B' all in complete as per manufactures specifications and all as specified.
25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in flooring, rough finished complete all as specified and directed.
Glazed ceramic tiles in vertical surfacestraight cut /edge , size 350mm x 250mm x 7mm /450mm x 350mm x 7mm thick ,joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 including taking down existing tile complete all as specified and directed.
Non skid ceramic coloured tiles, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 including taking down existing tile complete all as specified and directed.
Non skid ceramic coloured tiles, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 including taking down existing tile complete all as specified and directed.
15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
Preparation of new surfaces of any description of wall and applying two coats of exterior emulsion paint over one coat of exterior wall primer complete all as specified and directed.
Two coats of exterior emulsion paint on existing external plastered or unplastered surface of building over one coat of exterior wall primer (all as per manufactures instructions) with and including complete removal of existing treatment complete all as specified and directed.
Two coats of white washing on old ceiling/chajja surfaces including preparation of celing surfaces complete all as specified and directed.
Three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.
Complete removal of existing treatment of any type/description viz distemper,white wash etc from walls,facia, ceiling, RCC with mechanical means/grinder completiy and applying two coats of oil bond distemper @ 10Sqm/litres over and including one coat of interior wall primer @10Sqm/litres over and including 1.5 mm to 2.5mm thick wall care putty and sand papering making the surfaces even and smooth complete all as specified and directed.
Preparation of new surfaces of any description of walls,facia, ceiling, RCC etc and applying two coats of oil bond distemper @ 10Sqm/litres over and including one coat of interior wall primer @10Sqm/litres over and including 1.5 mm to 2.5mm thick wall care putty and sand papering making the surfaces even and smooth complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Two coats of synthetic enamel paint over one coat of red oxide primer on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed.
Supply only 5mm thick tinted sheet glass in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Solar control film 25 micron reflective type sticker to glass panes as per manufacturers instruction complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
Taking up or down steel tubing and connections 20mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No. 86 hereinbefore but except GI pipe using old pipe retrieved
Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No. 88 hereinbefore but except GI pipe using old pipe retrieved
Cutting existing 15 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) providing threads etc complete all as specified and directed.
Cutting existing 20 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) providing threads etc complete all as specified and directed.
Screwing existing 15 mm bore, ‘medium grade’, galvanized tubes, for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.
Screwing existing 20 mm bore, ‘medium grade’, galvanized tubes, for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210gms ), fixed as in repair complete all as specified and directed.
15mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
20mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
Hat and coat hooks, solid body Aluminium 175mm to 250 mm fixed to wall with screw and rawl plugs, fixed in repair complete all as specified and directed.
Stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib taps brass, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Cast copper alloy, chromium plated towel rail, 20mm dia, 60cm long between flanges fixed as in repair, complete all as specified and directed.
Wash hand Basin Mixer, long neck, with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, with hot and cold facility screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm/40 mm size discharge pipe (Minimum weight 45 gm) fixed in repair, complete all as specified.
PVC waste pipe 800 mm long suitable for 32 mm dia waste coupling, fixed in repair complete all as specified and directed.
Shower arm, in repair brass CP, cast copper alloy for fixing with 15mm bore pipe 195mm long with bend of 45 degree with flange comlete all as specified and directed
PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) fixed in repair, complete all as specified and directed.
PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed, Type B, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
PVC (SWR) rain water pipe, 75mm bore, single socketed, Type B, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.
110mm bore PVC (SWR) bends any radius complete all as specified and directed.
75mm bore PVC (SWR) bends any radius complete all as specified and directed.
110 mm or 75 mm dia PVC (SWR) vent cowl any radius complete all as specified and directed.
110 mm dia PVC (SWR) WC connector complete all as specified and directed.
110 mm dia PVC (SWR) junction single ( single T ) equal or unequal complete all as specified and directed.
PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, including jointing to waste pipe set in cement concrete type , fixed as in repair, complete all as specified.
Grating round 100 mm with or without hole of PTMT (Minimum weight 25 gm) and fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment, fixed as in repair, complete all as specified and directed.
600mm x 600mm x 250mm kitchen plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement, fixed as in repairs complete all as specified and directed.
Vitreous china wash down water closet pan (pedestal pattern), in repair white (excluding fixing bolts, flushing cistern and flush pipe) with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface,complete all as specified.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, fixed as in repair, complete all as specified and directed.
Low density polythene pipes of dia 40mm bore (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceiling or in floor and including elbow, bend & Tee etc. Complete all as specified and directed
Form work to sides and soffits of floor or roof beams, beam hanunchings, girders, shelves including supports, overhangs etc also splays between floors and beams etc rough finished surface of concrete flat complete all as specified and directed.
Concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, block complete all as specified and directed
300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and directed.
Double leg aluminium anodised door stopper , in repair with rubber foot , ISI marked and fixed with standard aluminium screws complete all as specified.
Aluminum door seal brush, fixed with steel screw at bottom rail of door shutter, fixed as in repair complete all as specified and directed,
Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm, with bowl of size 410mm x 330mm x 160mm incl fixing cantilever brackets and connection to union, pipe, including removal of old kitchen sink of stainless steel with brackets fixed as in repairs complete all as specified and directed.
Hand jet chromium plated (health faucet ABS Body with 01 m PVC pipe & wall hook) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed.
Refixing shutter in same opening of any description exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.
40mm dia cupboard brass knob fixed with nut screw and washer fixed in any position, complete all as specified and directed.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 3 mm (when open) complete all as specified and directed.
Door catcher cum silencer CP and fixed with standard steel screws, complete all as specified and directed.
Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.
Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
Supply only 3mm dia PVC coated chain link fencing of galvanised steel wire , size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 140 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.
Mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm but n.xc 10cm long, diameter of shank 5 to 10mm, complete all as specified and directed.
Mild steel round bars 10mm dia and over, cut to length fixed in chain link fencing complete all as specified.
Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on primer on surfaces of any description n.exc 10 cm width or girth when unconnected with other painting or when painted in a different tint including preparation of new surfaces complete all as specified & directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge.
RCC pipes class NP2 150mm dia bore, with collars, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed (excavation, earthwork and PCC shall be measured and paid for separately)
Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.
Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit 20mm bore, terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.
All as per serial item 148 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed
All as per serial item 148 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed
All as per serial item 148 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor
All as per serial item 148 herein before but for one light point controlled by two way switch complete all as specified and directed
Switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed
Switch piano, flush type, 6 amps, 230 volts, single pole, two way (ISI marked) complete all as directed
Switch piano, flush type, 16 amps, 230 volts, single pole, one way (ISI marked) complete all as directed
Sockets outlet multipurpose 2 in 1 pin, 6/16 Amps flush type ISI marked all as specified and directed
Electric bell ding dong type, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge.
Bell push, piano type 6Amp SP one way type complete all as specfied and directed.
Stepped type electronic fan regulator flush on the existing frame plate as directed.
Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
Lamp holder, PVC/Polycarbonate type with back plate angular type fixed on wall suitable for batten fitting complete all as specified and directed.
LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete all as specified and directed.
LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 10 watts capacity 2 feet long and white light and including connections from ceiling rose complete all as specified and directed.
Integrated LED bulk head luminarie fittings in engineering plastic housing with clear prismatic /opal diffuser /pressure aluminium die cast housing in white powder coating minimum IP-65 protection, system wattage not more than 10 watt (lumen output not less than 800 lumen) power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, glarefree, 0 UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm. Make C&S Electric/Surya Roshni/ Crompton Greaves/ Havells/ Philips
Sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way double door flush mounted with 200 Amps rated copper bus bar and blank plate with locking arrangement as required complete all as directed.
Sheet metal enclosure DB's 415 Volts, IP-43, suitable for mounting MCCB's, TPN, 4 way vertical, double door, flush mounted with 200 Amps rated copper bus bar and blank plate as required complete all as directed.
MCCB, 100 Amps, four pole,3 phase , 25KA, 415 volt with adjustable thermal and maganetic release complete all as specified and directed by Engineer-in- Charge.
MCB ,SP, 240 volt, 63Amps, 10 KA , 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
MCB ,SPN, 240 volt, 40Amps to 63Amps, 10 KA , 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
Supply only LED retrofit lamp 7 watt including B22 holder based polycarbonate body & aluminium heat sink white complete all as specified and directed,
Taking down of ceiling/exhaust fan & keeping in safe custody & refixing the same on the same location after cleaning the fan, complete all as specified & directed .
Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, all as specified and directed by Engr-in charge.
Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified & directed by Engineer-in-charge.
Sub main wiring using two single core, PVC insulated and unsheathed FRLSH multi stranded copper conductor of size 6 Sqmm ( nominal area) 1100 volts grade with and including continuous earth wire of size of 06 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade, cable as earth wire and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring complete all as specified and directed. Note : (i) Three runs each of one RM of 6 Sqmm cable shall be considered as 1 running metre for payment purposes. (ii) Cutting chases and PVC conduit will be measured and paid separately
Material & labour for earthing in replacementcomplete with galvanised steel earth plate electrode 60x60cmx6cm thick burried Each directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to Gl strips 25 x 4mm by means of bolts, nuts, check nuts and washers of Gl, earth strip potected by galvanised steel pipe 40mm bore (light gade) & connected to main control board all as shown in electrical plate No. 3 of SSR Part-I 200S connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1:3:6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 40 mm dia light grade Gl pipe and 20mm dia medium grade Gl Pipe for watering complete all as specified and directed.
20 / 25 mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge.
MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, of metal 2 way all as specified and dircted.
Sheet metal enclosure of size of 915mm x 610mm x 200mmwith locking arrangement and provision of 04 Nos glass 75mm x 150mm size in front of door for measuring meter reading, flush to wall suitable for fixing of 04 Nos energy meter including taking down carefully energy meter and reconnection the energy meter complete all as specified and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .