SPECIAL REAPIR TO BLDG NO. BI-8/A2B AND PROVN OF BOUNDARY WALL AND GATE NEAR 4/9 GR JCOS LIVING INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA.

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Demolition of brick work or stone boulder masonry built in cement mortar including all quarries, arches pillars etc and removing off the site complete all as specified and directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Demolition of cement concrete (reinforced) of any description in any position not otherwise specially provided for complete all as specified and as directed..

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Paving's not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Dismantling of AC corrugated/semi corrugated sheets including ridge as in roof covering and removing off the site complete all as specified and directed.

Dismantling floor hearth or wall tiling of any description of any thickness incl cement mortar bedding etc, complete all as specified and directed by the Engineer-in-Charge.

Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as specified and directed.

Taking down shutters of any description not exc 1.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each and re-fixing in the same opening after necessary repair like easing, etc complete all as specified and directed.

Excavation in trenches n exc 1.50 m wide and n exc 1.50m depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exc 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in soft/loose Soil, complete all as Specified and as directed.

All as per Item No. 1.14 above, but in road/hard standing etc and getting out

Returning filling in incl spreading , levelling , watering and well ramming in layers not exc 25 cm as in soft/ loose Soil, complete all as Specified and as directed.

Removing excavated materials not exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.

M&L for Plain Cement Concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundation, sub base and mass concrete etc completed all as specified and directed.

M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating incl formwork complete all as specified and directed.

M&L cement concrete type C2 (1:3:6) using 40 mm graded stone aggregate, 75 mm thick as in plinth protection, laid in alternate bays, finished even and smooth without using extra cement, complete all as specified and directed.

Excavating in post hole (or similar hole) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 M and making good surface in soft and loose soil complete all as specified and as directed.

M&L PCC 1:2:4 type B-2 (Using 40 mm graded stone aggregate) in Foundation, filling and mass concrete complete all as specified and as directed.

S&F Welded steel wire fabric weight per square meter n. exc 4 kg, fixed complete to wood or steel members all as per specified and directed.

M&L mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. (NOTE: PCC for foundation will be measured separately)

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item No. 1.25 above, but 6mm to 8mm dia.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

M&L RCC design mix (M-30 grade) using 20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid separately)

M&L RCC design mix (M-30 grade) using 20 mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid separately)

M&L RCC design mix (M-30 grade) using 20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid separately)

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

S & F mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed by Engineer-in-Charge.

M&L brick work with sub class ‘B’ fly-ash bricks (with old size bricks), straight or curved on plan exc. 6.0 metre mean radius, built in cement mortar 1:4, complete all as specified and as directed.

M&L for brick work with sub class `B’ fly-ash bricks (with old size bricks), straight on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

- ditto item No. 1.36 above except bricks complete all as specified and directed.

M&L for brick work using old size fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished rendering surfaces even and smooth without using extra cement including necessary scaffolding etc complete all as specified and directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with water proofing compound (@ 200 ml per bag of cement or as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separately as "Supply only"

Supply only liquid water proofing compound, all as specified and directed.

M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L 10 mm thick rendering on ceiling surfaces in cement mortar 1:3, finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and as directed

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc completed all as specified and directed. (NOTE: Inner girth shall only be measured for payment)

M&L for brushing cement slurry @ 3 Kg/sqm over cleaned roof surface prior to application of concrete complete all as directed by Engineer - in - charge .

M&L for providing 25mm thick Cement Concrete, Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid separately)

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregates) as required complete all as specified and directed.

M&L 10 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for applying two coats of white wash to old decorated (white washed) surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for applying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for applying two coat of Acrylic distemper to old decorated surfaces of wall including preparation of surface complete all as specified and directed.

M&L for applying two coat of Acrylic distemper on old decorated surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L Preparation of new plastered surfaces of wall and applying a coat of chalk whitening and finished with two coat of acrylic distemper complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceilings and applying a coat of chalk whitening and finished with two coat of acrylic distemper complete all as specified and directed.

M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L for complete removal of existing treatment on old decorated surfaces of walls and applying Two Coats of weather proof exterior emulsion paint over a coat of alkali resistant primer applied over and including 1.5 mm thick exterior wall putty complete all as specified and as directed.

M&L for applying two coats of exterior acrylic emulsion weather proof paint over a coat of suitable exterior primer (as per manufacturer's instructions) including preparation of newly plastered surfaces of walls of any description, over 10cm width or girth not otherwise described complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying one coat of exterior acrylic emulsion weather proof paint to old decorated surfaces of walls of any description, over 10cm width or girth not otherwise described (as per manufacturer's instructions) complete all as specified and as directed.

M&L for preparing new surface of wood or wood based material of any description and in any position not otherwise described for, exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as directed.

M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L 25 mm thick pre polished coloured chequered tiles of size 300mm X 300mm, jointed & pointed in neat cement slurry with white or coloured to match the shade of tiles, laid over & incl 15 mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS:15658-2006 of 60 mm thickness M-35 Grade with grey cement and pavement complete all as specified and as directed. (NOTE: Sand cushioning, if required shall be measured and paid separately)

M&L Sand filling under floors under paver block, thickness not exc 40 mm including consolidation complete all as specified and as directed

M & L for heavy duty coloured ceramic floor tiles of size 300 x 300x 10 mm thick, suitable for high traffic external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistance as in floor including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. (MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender)

Supply and Fixing PVC solid wall lining consisting of 5 mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and as directed.

S&F solid PVC strip 5mm thick PVC sheet for wall panelling as a beading on top surface the sheet for wall lining/ panelling as per specification of manufacturer and as directed by the Engineer-in-Charge.

M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/ sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete as in repairs, all as specified and as directed

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured Galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile Galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile Galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

All as per Item No. 1.74 above but 0.50 mm thick coloured plain Galvalume sheet as in ridge/valley gutter of roof.

S&F in repairs 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap, fixed with L or J type cranked hook bolts and washers in roof, skylight roof, wall etc complete all as specified and directed.

M&L in repair Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members not exceeding 4 Kg per sqm, as in repairs, complete all as specified and directed.

Dismantling Structural Steel Work including Doors, Gates but excluding Framed Truss etc. complete all as specified and as directed.

S&F rolled mild steel joist, channel, angle, or tee sections, fixed independently etc upto 6 metre height from each floor level (cut to ordinary length i.e. within 20mm of the length indicated) of Gde Fe-410-W(Gde-E-250) quality-B including using proper iron props and steel plates to existing RCC overhead members like beams, slabs etc so as to ensure safety of existing structure and floor during repairing works complete all as specified and directed. (NOTE: The MS section to be provided under this item shall be used as a beam to support existing floor/roof)

Fixing only old mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed. (Note:- Old serviceable retrieved Steel against Item No. 1.79 shall be reused)

Dismantling of cast iron or reinforced concrete drain pipes, 100 mm bore, jointed in cement mortar and taking out of trenches, in required complete all as specified and directed.

S&F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed.

-ditto- all as item no. 1.82 above but pipes fixed on walls

S&F CI bends for 100mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.

S&F CI bends for 100mm pipe (any radius) diminishing piece or tapers (large bore measured) with Oval Access Door complete all as specified and directed.

S&F Cast Iron Branch Piece 100mm bore (dia), single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes, single socketed, conforming to IS:13592-1992, type 'A', in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes, single socketed, conforming to IS:13592-1992, type 'A', in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7-8mm thick area of each tiles exc 0.06 Sqm but n. exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and directed

M&L Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.11 Sqm but n. exc 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and ncl 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and directed

M&L glazed coloured ceramic tiles in vertical surface 300 X 450 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Supply and fixing 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F steel window with side hung shutter including necessary hinges with steel handle and steel peg stay complete with glazing bars devotailed or welded all as directed. (NOTE: Sheet glass will be measured and paid separately)

S&F steel window with side hung shutter including necessary hinges with steel handle and steel peg stay complete without glazing bars devotailed or welded all as directed. (NOTE: Sheet glass will be measured and paid separately)

S&F factory made 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Party, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

all as per item No. 1.98 but 30 mm thick for window/ventilators etc, are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)

Supply & fixing factory made 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkhats complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mm x 47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 100 mm x 45mm made out of 5mm plain colour PVC sheet, frame reinforced with MS square tube of size 40mm x 20mm of 19 gauge throughout the frame, fixed in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.

M&L for Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on the front face & 2 mm plain colour prelaminated PVC sheet on back face with particle board core complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F powder coated (medium thickness of powder coating 50 micron) aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

M&L for powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings etc. complete all as specified. (NOTE: Glass shall be measured and paid separately)

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor. 150mm overall length of cover plate complete all as a specified and as directed

Supply & fixing 75mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.

Supply & fixing 100mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.

S&F 125 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.

S&F 150 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.

S&F 125mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.

S&F 150 mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.

S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.

ditto - all as per item No. 2.16 here-in-before, but fixed in repair.

S&F 4.00 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 4.00 mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in square exc 0.50 Sqm in each pane complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.

-ditto- as per Item No. 2.19 above but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each

S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type), making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141) (Make of Waste Pipe: PRAYAG, Cat No: 327 or equivalent make as approved by GE) (Make of Waste Coupling: PRAYAG, Cat No: BEA-10 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101)

S&F Chromium plated brass Pillar tap, fancy type. with aerator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / Cera, Model: OCEAN)

Supply and Fix in repairs vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 or equivalent model in CERA)

S&F in repair 10 ltrs capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)

S&F in repair Chromium plated brass Bib cock with wall flange (premium quality), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4880A1 / JAQUAR, Cat No: FUS-29037 / CERA, Cat No: F1015151/ ASIAN PAINTS, Cat No: ALBC101 / PRAYAG, Cat No: 9306-N/HINDWARE, CAT No: F360004)

S&F in repair Chromium plated brass Angular stop cock (premium quality), with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4807A1 / JAQUAR, Cat No: FUS-29053 / CERA, Cat No: F1015361 / ASIAN PAINTS, ALAC101 / HINDWARE, Cat No: F360006 / PRAYAG, Cat No: 9010)

Supply and fixing gun metal gate valve with iron wheel head, ISI marked, screwed both ends for iron pipe for 20 mm bore including taking out old unserviceable one complete all as specified and directed.

S&F in repair 15mm bore heavy duty PVC connector pipe of length 450 mm with PTMT coupling at both ends, screwed down for pipe as directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON / CERA)

S&F in repair 15mm bore heavy duty PVC connector pipe of length 600mm with PTMT coupling at both ends, screwed down for pipe as directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D)

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repairs PTMT round grating 100 mm dia complete all as specified and directed. (Make : PRAYAG, Cat No: 111 or equivalent make as approved by GE)

Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Liters', multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed.

S&F 20 mm bore Ball brass valves, high pressure, with HDPE float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in JEXON / POLYTUF / SHAKTI)

M&L For Up rooting of tree from walls of bldgs up to extended root and spraying of acid of required quantity complete from any location of bldg, up to one storey and making good disturbed surface with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20 mm graded stone aggregate etc complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200 mm set in cement mortar complete all as specified and directed.

Supply and laying 150 mm bore reinforced concrete pipe of Class NP-2, with collars, laid and jointed complete all as specified and as directed by the Engineer-in-Charge.

M/L for PCC (1:3:6) type C2 using 40mm graded broken stone aggregates for bed concrete to drain pipe packing under haunching for sides for 150 mm dia pipe lines complete all as specified and as directed.

Cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and removing the same at a distance exceeding 500 metre but not exceeding 1 Kilometre where directed, washing of the drain with water complete all as directed by the Engineer-in-Charge.

Cleaning of blocked waste line (of any bore) from sink / urinal / wash- hand basin to floor trap manually (by pushing a piece of bamboo split, tied with gunny bags at one end to other) including de-watering and well flushing the line with water and testing on completion complete as directed by the Engineer-in-Charge.

Cleaning of sewage line of 150 mm bore either manually (by pushing a piece of bamboo split, tied with gunny bags at one end from one manhole to another manhole) or by mechanically operated pump including dewatering, desilting and well flushing the line with water and testing on completion complete as directed by the Engineer-in-Charge.

M&L for cutting chases for water tubing, pinning in making good to facing where required in cement mortar (1:3) to brick wall cutting girth n.exc. 10cm girth complete all as directed.

S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 900mmX450mmX75mm thick, of capacity 5MT, fixed in proper position complete all as directed by Engr in Charge

S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 600mmX450mmX75mm thick, of capacity 5MT, fixed in proper position complete all as directed by Engr in Charge

Taking up or down steel water tubing 15 mm bore incl connection , cleaning etc

-ditto all as per item No 2.45 here-in-before but 20 mm bore

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.

-ditto all as per item No 2.47 here-in-before but 20 mm bore

SCHEDULE 'A' PART-II (ELECTRIFICATION WORKS)

Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc.complete all as specified and directed.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

All as per item No. 3.02 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 3.02 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 3.02 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.

S&F Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.

S&F Switch piano, flush type single pole, 15/16 Amps, one way complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

S&F stepped type electronic fan regulator, flush type

S&F new Ceiling rose, surface type, three terminals, PVC/polycarbonate complete all ass specified and directed.

Taking down and re-fixing LED battens, of any size or wattage and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed.

S&F lamp holder with back plate suitable for batten/pendant fittings or to be mounted on walls

Taking down and refixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, any sweep complete all as specified and directed.

Taking down and refixing exhaust fan, single Phase. 230V of any sweep with, blades, and frame and louvers including making hole as per site including making good disturbed surfaces fixing with fast nuts , properly clamped louvers complete all as specified and directed.

Taking down of old Submain wiring upto any size any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M&L for sub main wiring with 4 runs (P-N) of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm 1100 volts grade along with one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10 sqmm 1100 volts grade as earth continuity conductor drawn through and including adequate size PVC non-metallic concealed conduit complete all as specified and as directed. (NOTE : Five runs of single core 10.0 sqmm cable and one run of PVC conduit shall be measured as one unit)

All as per Srl. Item No. 3.18 above but with two runs of 6.0 Sqmm cable and one run of 6.0 Sqmm as earth continuity conductor in PVC conduit (NOTE : Three runs of single core 6.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

All as per Srl. Item No. 3.18 above but with two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm as earth continuity conductor in PVC conduit (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

Supply, Laying, jointing and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole incl necessary thimbles complete all as specified and directed for the sizes and cross sectional area 16 Sqmm, 2 core (Note :- Necessary earth work to be measured and paid separately.

Excavation in trenches in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of Cables, poles, stay and getting out of excavated material complete all as specified and directed by Engineer-in-Charge

M&L for sand cushioning/sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed. (NOTE: Punned thickness shall be measured for payment)

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc. 1.5 m above the starting point all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and directed by Engineer-in-Charge

M&L fly-ash bricks with sub class 'B' locally available laid in trenches above sand cushioning for cable protection complete all as specified and as directed.

S&F LED Bldg Security Light fitting 30 W, in pressure die cast aluminium housing with PMMA lens and toughened glass/PC cover having TOP opening separate driver compartment, with integrated constant current electronic driver, incl providing new GI pipe bracket as per existing size including necessary electrical connection with suitable size copper wire complete all as specified and directed and complying with the following specifications:-. (a) minimum efficacy 110 lumen/watt (b) CRI not less than 70, (c) THD < 30% (c) having in built short circuit & surge protection upto 5 kV (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (f) Weather protection grade: IP66

S&F LED post top luminiare, 40 watt, with die cast amuninium spigot, spun aluminium powder coated top cover, clear diffuser with high power LED, IP 65 grade protection, designed with indirect symmetrical light distribution, with integrated constant current electronic driver complete all as specified an directed. (Make : BAJAJ, Cat No: BGCT W4 LED WW / HALONIX, Cat No: HLPT-04-40-CW / SURYA, Cat No: SLE PT 40W-ETPP / MAGIK, Cat No: APBY040C0876 / C&S, Cat No: CETUS/40W or equivalent model in other makes specified in particular specifications) (NOTE: Wire for connection of luminaire shall be measured and paid separately)

S&F PVC insulated unarmored & PVC sheathed copper cable 3 core of cross sectional area 1.5 sqmm for providing electrical connection from sheet metal enclosure to light fittings including suitable size copper lugs complete all as specified and directed.

S&F 40 mm bore galvanized iron pipe (light grade) with all fittings, laid in trenches or under roads/floors/culverts and/or fixing to electric poles with suitable size mild steel flat iron clamps, bolts, nuts & washers etc complete all as specified and as directed by the Engineer-in-charge.

S&F MCCB (premium range), 4 pole, 100 Amps, 16 kA, 415 Volts, AC, 50 Hz with and including adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed.

S&F DB, VTPN, 8 way, vertical type, IP 43 protection, double door (premium range), 415 volts with provision for MCCB as incomer and MCB as outgoing and electrically connecting up complete all as specified and directed.

S&F TPN DB, IP 43 protection, double door (premium quality), 415 volts, 4 way (8+12), with 100 Amps copper bus bar for each phase complete all as specified and directed.

S&F sheet metal enclosure, powder coated, IP 30 protection, 2 way without busbar complete all as specified and directed. (MAKE : L&T, Cat No. DBENC002SD / HAGER, Cat No: VYM02C / LEGRAND, Cat No: 507791 / SCHNEIDER, Cat No: A9HMES02 / ABB, Cat No: SEN 2P)

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs (Premium Quality), for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed.

S&F SPN DB, IP 43 protection, double door (premium range), 240 volts, 4 way, with 100 Amps copper Bus Bar complete all as specified and directed.

NOTE FOR ITEM NO. 3.31 to 3.36 :- (1) Incoming MCCB/RCCB/MCB and outgoing MCBs shall be measured and paid separately as "Supply Only". (2) Quoted rate is deemed to be inclusive of blanking plate for slots remaining blank after fixing of MCBs. (3) DB, MCCB, RCCB & MCB shall be of the same manufacturer.

S&F MCB, 'C' series, SPN, 40-63 Amps, breaking capacity 10KA (Premium Quality) complete all as specified and directed.

S&F MCB (premium range), 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB (Premium Range), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB 40 to 63 Amps, C-curve, Four Pole, 240 Volts, breaking capacity 10 KA including taking down of existing unserviceable MCB of any type complete all as specified and directed (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / PANASONIC / HAGER)

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized iron strip 25 X 4 mm (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing and dismantling of existing unsv earthing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.

UNIVERSAL TRADING CENTRE

ARJUN DAS VALECHA

M A ENTERPRISES

BASU AND CO

GHOSH ENTERPRISE

MS HORIZEN

DEB AND COMPANY