8119/SAR-33/E8 REPAIRS TO BOUNDARY WALL, FENCING, GATE, CULVERT, DRAIN ETC AT AF STN SARSAWA

Amount

Demolition of brick work built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints,hacking for key,scrubbing down with water etc all as specified and directed.

M & L for brick work with sub class 'B' bricks in straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC as per manufacture's instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Note: WPC will be measured and paid for separately.

Supply only integral water proofing compound as per latest IS specification of complrte all as specified.

Material and labour for preparation of new plastered surfaces and applying two coat Apex paint over a coat of alkali resistant priming paint complete all as specified and as directed any tint. Note: The Camouflaging Pattern of colour shall be as under Code 2361 - 40% Code 0342 - 30% Code 8252 - 10% Code 8613 - 20%

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for all as specified and as directed.

Dismantling post or struts (Wood steel or RCC) any section incl taking out embedded portion & making good disturbed portion all as specified and as directed..

Dismantling chain link fencing or fencing wire mesh of any type.

Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earh around in layer n exc 25cm watering & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil.

M&L providing cement concrete type B-2 1:2:4 (40 mm graded agg) in foundation ,filling and mass concrete as in posts.

S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessary drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165.

Ditto item above but fixing only.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and fixed to any type of standard rails straining bolts incl securing or tying at crossing with and provn of Galvanised MS wire complete.

Supply only GI chain link fencing 4mm dia, made of mild steel GI mesh 50 X50 mm ,straining bolts etc with 10 mm dia round bars and flat iron 40 mm x 6 mm thick, binding and jointing complete incl all necessary drilling, bolting or riveting etc confirming to Fe 410. NOTE:- 10mm dia round bars and FI shall be measured and paid separately.

Fixing only,any mesh size and type straining bolts etc,including provision of binding wire complete.

S&F mild steel work in MS flat for securing chain link fencing with posts/struts and filxed with nuts/bolts and similar items conforming to Fe 410-(Gde-E-250) quality.

S&F Round bars 10 mm dia and over cut to length bent to shape required incl binding with MS anealed wire not less than 0.9mm dia or securing clips with fencing wire mesh all as specified and as directed.

S&F Mild steel screws bolts (Machine made) made hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with one hexagonal or square nut , exc 5 cm but nexc 10 cm long dia of shank 5 to 10mm.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth complete all as spcified.

M&L Brick work with sub-class 'B' bricks,straight or curved on plan to any radius in half brick thick walls built in CM 1:4

M & L PCC 1:3 :6 type C-1 (20mm graded stone aggregate) as in surface channels of drain including necessary from work.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed by Engr-in-Charge.

Add or deduct for each 25mm girth or part thereof over or under 30cm ditto.

M&L for precast cment concrete 1:2:4 type B1 20 mm graded stone aggregate as in drain / man holes cover and set in cement mortar 1:4 and laid in position complete all as specified and directed.

S&F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape, required including crancking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr in depth for foundation etc or for shafts , wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out soft/loose soil.

S&F Reinforced concrete pipes, class NP2,bore of pipe in 450mm, laid and jointed complete with collars

M&L Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:3:6 type C-2

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soft /loose soil complete.

Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

S&F in repair Punched tape concertina coil 600mm dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed.

S&F in repair Punched tape concertina coil 1000mm dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed.

S&F Mild steel work in framed work such as in doors or gates grills, gratings,framed guard bars,ladders etc with ends of bars shouldered and/or riveted or forged into spikes and similar work confirming to Fe-410-O as in framed and hung gates including pintle hinges,stops,hand made sliding bolts etc and similar work confirming to Fe-410-W complete all as specified and directed.

S & F In repairs stainless steel Sign board made of hardened ACP sheet 4 mm thick fixed to stainless steel rectangular pipe of size 50x25 mm and frame of size 900x1200mm. The frame is mounted on two leg post of 3.50 mtr long, 60mm dia stainless steel round pipe of 16 gauge complete including necessary excavation, PCC 1:2:4 in foundation (30cmx30cmx45cm) returing filling and removal etc. Grade of stainless steel shall be SS-304. All stainless steel parts shall be polished. Sign boards shall be high intensity reflective tape on both sides with wide HIP steel and overly film of blue colour with computer cut letters, arrow, symbols and emblems all as specified and directed by Engineer-in-Charge. Two boards on single frame shall be fixed back to back.

S & F in repairs high quality plastic outdoor Convex mirror used for traffic safety circular shape 80 cm dia including 60mm dia standing GI pipe medium grade with clamps and necessary fitting, excavation, PCC 1:2:4 in foundation (30 cm x30cmx45cm) returing filling and removal etc fixing in position height up to 900 to 200mm from GL as directed by Engr-in-Charge.

M/s Inderlal

MS GURENDER SINGH

SHRI RAM ENTERPRISES

RAJAN TRADERS