Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC BHUBANESWARI BHUBANESWARI ODISHA | ₹1.3 Cr Quoted ₹1.1 Cr | L1 | Accepted-AOC The amount quoted by L1 bidder M/s Divya Shakti Enterprises is 23.28 percent below the estimated cost/ updated cost |
| 2 | L2₹1.4 Cr+₹32.2 L (30.2%)Rejected-Finance AT PO AMBAMUNDA PO HENSMUL TALCHER DIST ANGUL ODISHA PIN 759103 | TALCHER | ANGUL | ODISHA | 759103 | ₹1.4 Cr+₹32.2 L (30.2%) | L2 | Rejected-Finance On being L2 |
| 3 | L3₹1.5 Cr+₹42.1 L (39.5%)Rejected-Finance AT DERA COLLIERY TALCHER ANGUL ODISHA 759100 | TALCHER | ANGUL | ODISHA | 759100 | ₹1.5 Cr+₹42.1 L (39.5%) | L3 | Rejected-Finance On being L3 |
Tender Value
₹1.6 Cr
EMD Value
₹2.0 L
Closing Date
18 Mar 2024, 5:00 pmClosed
Vijay Kumar Staff Officer(EnM) Lakhanpur Area
Vijay Kumar Staff Officer(EnM) Lakhanpur Area GM Office Bandhabahal Dist-Jharsuguda Odisha-768211 Mob-9437595715
Diversion and laying of new M.S. pipeline for dewatering mine water and firefighting in Coal Stock of size 10 inch, 8 inch and 6 inch and Fabrication and repairing of pontoon for upcoming monsoon at Lakhanpur OCP, Lakhanpur Area, MCL
2024_MCL_302687_1
MCL/LKPA/EnM/eNIT/23-24/113 dt-27.02.2024
Open Tender
Miscellaneous Works
Item Rate
120 days
Lakhanpur OCP, Lakhanpur Area
Please refer Tender documents.
5 documents required · 5 mandatory
₹2.0 L
30 Apr 2024
27 Feb 2024
22 Mar 2024
27 Feb 2024
18 Mar 2024
28 Feb 2024
27 Feb 2024 - 7 Mar 2024
Amount
Transportation of M.S pipe on 10Te capacity truck including loading, unloading on departmental truck etc of all lead within the mine premises per direction of Engineer -in- chage. ( Except hire charge of Truck)
10" dia. M.S Pipe
8" dia. M.S pipe
6" dia. M.S pipe
Shifting of M.S pipe manually within a lead of 100mtrs. where the site is not motorable/in slope terrain / different benches in mine etc. whereever required as per direction of Engineer-in-charge.
10" dia. M.S Pipe
8" Dia. M.S pipe
6" dia. M.S pipe
Laying of M.S. Pipe including sligning surface leveing & supporting wherever required and jointing of pipe all complete as per direction of Engineer-in-charge.
10" dia. M.S Pipe
8" Dia. M.S pipe
6" Dia. M.S pipe
Dismantling of M.S pipes including cleaning around the joints, levalling to loosen the joint and separate the pipe and stacking within a lead of 50 mtrs as per direction of engineer -in-charge.
a) 10" dia. M.S Pipe
Rubber insertions for 250 mm dia. Pipe joints.
Rubber insertions for 200 mm dia. Pipe joints.
Rubber insertions for 150 mm dia. Pipe joints.
M.S Nut and Bolt for 10" dia. M.S pipe
M.S Nut and Bolt for 8" dia. And 6 " dia. M.S pipe
making of 6" Dia. Bend, Tee & Reducer as per requirement
making of 8" Dia. Bend, Tee & Reducer as per requirement
making of 10" Dia. Bend, Tee & Reducer as per requirement
making of 6" dia. Short pieces/Taper Pieces.
making of 8" dia. Short pieces/Taper Pieces.
making of 10" dia. Short pieces/Taper Pieces.
Welding of Flanges
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Dismantling of steel work in built up sections in angles ,tees,flats and channels including all gusset ,bolts, nuts,cutting, rivetswelding etc. including dismembering and stacking within 50 mtrs lead.
Painting with black anti corrosive bitumastic paint of approved brand and manufacture to give an even shade two or more coats on new work.
Fitting and erection of drum including cleaning,pressure,testing,tightening and finally pulling inside the tee.
Supply of PVC Drum, 200 ltr
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm dia. ( Class ii)
Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC
Upendra Singh.
OMM SHANKAR TRANSPORT
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .