SPL REP TO BLDG NO T-42 AND PROVN OF SOLAR SECURITY LIGHT UNDER THE AOR OF GE 874 EWS

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based steel sheet 0.50mm thick, of any colour having tensile strength of 550 Mpa, profiled for ridge as in roof covering, fixed with self tapping screws complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.

M&L for 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails as in wall, facia, eaves boarding complete all as specified and directed.

Same as per item No 5 above but except boarding.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in walls complete all as specified and directed.

M&L 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling complete all as specified and directed.

S&F clean swan batten at 30 cm centre to centre exc 5 and not exc 15 cm of 2nd class soft wood complete all as specified and directed.

Demolition of matting, single or double any type including, bamboo framing or bamboo supports, cover fillets, if any complete all as specified and directed.

M&L PVC tiles/ sheets of thickness 1.50 mm laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to receive the topping layer complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 18-20mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for mirror polishing on marble/ granite/Kota stone/ stone work where ever required to achieve high gloss finish complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed.

All as per item No 16 above but as in in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed.

M&L for plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. complete.

S&F mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade Fe410-W (Grade E-250) quality A including a shop coat of primer complete all as specified and directed ..

Same as per item No 22 above but rejection & fixing only.

Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed.

M & L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed.

M&L brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M& L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete/stone, surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement (External surfaces) complete all as specified and directed. Note:- WPC shall be measured and paid separately)

Supply only approved integral water proofing compound complete all as specified and directed.

Rendering 15mm thick on fair faces of brick, stone or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (w/o taking out shutter from the frame) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed.

Refixing shutters in same opening exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed.

S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed.

S&F for 35mm thick, 2nd class soft wood (Kail), plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

S&F 30mm thick, 2nd class soft wood, Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b). complete all as specified and directed.

S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed.

S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F for 75mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 300 mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and directed.

S & F aluminum handles, cast type, anodized 150mm long complete all as specified and directed.

S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed.

M & L for sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane,3mm thick complete all as specified and directed.

S&F Harrison rails, stainless steel, with fixing brackets, stops, rollers etc., complete all as specified and directed.

M & L for precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate complete all as specified and directed.

S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm stone aggregate) as in paving, plinth protection etc, surfaces finished even and smooth without using extra cement and dividing into panels not exc 1.20 Mtr complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, complete all as specified.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed.

M&L for PCC (1:3:6) (Nominal mix) type C-1 using 20mm graded aggregate as in surface channel and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L for chequered cement concrete tiles of size 20cm x 20cm and 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M & L for providing, cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Taking down carefully with battens/ PVC surface/ concealed conduit unserviceable copper/ aluminium point wiring (light, fan, socket) complete including fittings such as switches, ceiling roses, pendants, socket etc. and removing unserviceable material from site and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M & L for point wiring One light /one fan/one bell point controlled by one switch, with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular Teressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly.

All as per item No. 66 here-in-before but point wiring for one 5Amps socket outlet point on independent board controlled by one single pole, one way switch complete all as specified.

All as per item No. 66 here-in-before but point wiring for one 5Amps socket outlet point on the same board controlled by one single pole, one way switch complete all as specified.

All as per item No. 66 here-in-before but point wiring for one light point controlled by two single pole, two ways switch complete all as specified.

All as per item No. 66 here-in-before but point wiring using 2.5 sqmm as main wire & 2.5 Sqmm as continuous earth wire, for one 15Amps socket outlet point on independent board controlled by one single pole, one way switch complete all as specified.

Supply and fix switch piano, flush type, single pole, one way, 5 Amp, 230volts complete all as specified.

Supply and fix Switch piano, flush type, single pole, two way, 5 Amp 230voltscomplete all as specified.

Supply and fix Switch piano, flush type, single pole, one way, 15 Amp 230volts complete all as specified.

Supply and fix Socket outlet multipurpose 3 pin, 5 Amp and 2 pin 5 Amp, flush type, complete all as specified.

Supply and fix Socket outlet multipurpose 3 pin 5 Amp & 15 Amp, flush type, complete all as specified.

Supply and fix Ceiling rose, two to three terminals, PVC/ isolated body, complete all as specified.

Supply and fixing in replacement LED warm lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix sheet metal enclosure (DB) three phase with neutral, double door 4 way, 415 volt with bus bar & IP 54 protection, including taking out old unserviceable complete all as specified and directed.

Supply and fix sheet metal enclosure (DB) single phase & neutral, double door 8 way, 230 volt with 200 Amps rated bus bar & IP 54 protection, including taking out old unserviceable complete all as specified and directed.

Supply and fix in replacement MCB 40 to 100 Amp, 415 Volt, TPN, breaking capacity 10 KA, 'C' curve, complete all as specified and directed.

Supply and fix in replacement MCB 16 to 32 Amp, 415 Volt, TPN, breaking capacity 10 KA, 'C' curve, complete all as specified and directed.

Supply and fix in replacement MCB 40 to 63 Amp, 415 Volt, SPN, breaking capacity 10 KA, 'C' curve, complete all as specified and directed.

Supply and fix in replacement MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA, 'C' curve, complete all as specified and directed.

M & L sub main wiring with 2 runs of 2.5 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor FRLS including PVC casing & caping of suitable size and provision of one run 2.5 sqmm PVC insulated unsheathed single core copper conductor as earth continuity, connected to earth dolly inclusive of all accessories complete all as specified and directed. Note :- 3 Runs of 2.5 Sqmm wire and one run of PVC casing & caping shall be measured as one unit .

All as per item No. 84 here-in-before but using 4 single 4Sqmm as main & 1 single core 4 Sqmm as earth wire.

M & L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion complete all as specified and directed.

S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3 1/2 core complete all as specified and directed.

Supply and installation of smart integrated solar all in one street light 40 Watt with Highest Ever system efficacy of 170 Lum/W, MPPT Charge Controller, Lie Fe P04 Battery (12.8V 27Ah), Mono Crystaline Solar Panel, PIR motion sensor, easy installation complete all as specified and directed.

Supply & Fixing GI Pipe 62/65mm (± 10%) dia medium grade with all fittings complete all as specified and directed.

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation laying of pole stay assembly and laying of LT cable as in soil and getting out complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

PCC 1:4:8, type D:2 (using 40 mm crushed stone graded aggregate) as in foundation, filling and mass concrete for Poles/ Stays, complete as specified and directed.

Please Enable Macros to View BoQ information