COMPREHENSIVE BR REPAIRS LIKE JOINERY EXTERNAL PLASTERING SANITARY ROOF REPAIRS INCLUDING INTERNAL ELECTRIFICATION AT MADGAON UNDER GE PANAJI GOA

Amount

Dismantling plain or corrugated Asbestos cement sheet in roof coverings any gauage, thickness including tilting fillet as specified and directed.

Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality 'A', Fe-290 (Gde E- 165) complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paintover old steel surface 10cm width or girth over a coat of red oxide primer including complete removing old paint by paint remover or burning off by blow lamps and cleaning with scrapers complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortor including all quions, arches pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles all as specified and as directed.

Material and labour for pre-cast cement concrete block masonry with solid blocks in cement concrete 1:3:6 ( type C1) using 20 mm graded stone aggregates, exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceble tiles to store and rubbish off the premises.

Supply and fix Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Supply and fix Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Supply and fix Glazed ceramic coloured tiles on verticle surface of size 300x200x7 mm thick surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 all as specified and as directed.

Material and labour for 15 mm thick screed bed or bedding layer of cement mortar 1 : 6 for laying floor finishes all as specified and as direccted.

Taking down cement plaster any description on brick or stone surface including racking out joints hacking for key scrubbing down with water etc complete.

Material and labour for 15 mm thick plastering in cement mortar 1:4 with WPC 3% by weight of cement, surfaces finished even and smooth without using extra cement on walls other similar work etc. all as specified and as direccted. Note :- Water proofing compound shall be measured & paid separately

Material and labour for 15 mm thick plastering in cement mortar 1:6 finished even and smooth without using extra cement on walls other similar work etc. all as specified and as direccted.

Material and labour for 10 mm thick plastering in cement mortar 1:4 finished even and smooth without using extra cement on ceiling, soffit of chajja and roof projection or other similar work etc. all as specified and as directed.

Material & Labour for applying two coats of weather proof acrylic emulsion paint Ist quality over a coat of weather proof acrylic emulsion exterior primer including preparation of new surface of walls complete all as specified and as directed.

Material & Labour for applying two coats of weather proof acrylic emulsion exterior paint Ist quality over a coat of weather proof acrylic emulsion exterior primer including complete removal of existing treatment of old wall surface complete all as specified and as directed.

Material and labour for preparation of new plastered wall surfaces and applying two or more coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of chalk whiting complete, as per manufacturer's specification, complete all as specified and as directed.

Material and labour for applying three coats of white wash over 3mm thickness wall care putty on ceiling surface to prepare the surface even and smooth including complete removal of existing treatment from old decorated ceiling surfaces or newly plastered surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old wall surfaces and applying three coats of white wash all as specified and as directed.

Material and labour for complete removal of existing treatment from old wall surfaces and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over wall putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed

Taking down chowkats or frame including hold fast not exc 1.5 Sqm each all as splecified and as directed .

Taking down chowkat with shutter including hold fast (Wihtout taking off shutters from the frame) exc 1.5 Sqm but not exc 4 sqm each all as splecified and directed.

Supply and fix mild steel flat iron for hold fast complete conforming to Fe-290 Gde-E-165 all as splecified and as directed.

Material and labour for preparing the surface of wood treating back of chowkats area tarred exc 0.1 Sqm and not exc 0.5 Sqm each. all as splecified and as directed.

Supply and fix mild steel frame & work such as grills gratings etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, and similar work conforming to Fe.290.Gde-E-165 all as splecified and as directed.

Supply and fix second class hard wood kiln seasoned chemically treated plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as splecified and as directed.

Supply and fix IInd class hard wood 35mm thick factory made plain framed, panelled shutter (one panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS : 1003 (Part-I) kiln seasoned and chemically pressure treated all as splecified and as directed.

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specified.

Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and as directed.

Supply and fix for stainless steel butt hinge, size 75 mm all as specified and as directed.

Supply and fix for stainless steel butt hinge, size 125 mm all as specified and as directed.

Supply and fix aluminium anodized barrel tower bolt 100 mm extruded section all as specified and as directed.

Supply and fix aluminium anodized barrel tower bolt 150 mm extruded section all as specified and as directed.

Supply and fix extruded aluminium alloy handle fabricated type 150 mm size all as specified and as directed.

Supply and fix aluminium alloy , anodized , 250 mm size sliding door bolt with hasp & staple (bolt type ) & fixing clips of sheet , cast or extruded section & fixing bolt & sliding bolt of extruded section or cast aluminium alloy etc all as specified and as directed.

Supply and fix 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane etc all as specified and as directed.

Supply and fix for figured glass 4 mm thick pin head type and glazing with putty exc 0.5 sq. m in each pane etc all as specified and as directed.

Supply & fix in repair Alu wire mesh 0.45 mm nominal dia of wire and width of aperature 1.40mm & fixed with aluminium wire staple etc all as specified and as directed.

Material and labour for preparing new wooden surface and applying two coat of synthetic enamel paint over one coat of pink primer all as specified and as directed.

Demolition and breaking up 100mm dia bore drain pipes (Salt glazed ware, CI, AC or Reinforced concrete) set in cement mortar

Demolition and breaking up 75mm dia bore drain pipes (Salt glazed ware, CI, AC or Reinforced concrete) set in cement mortar

Supply and fix PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints fixed to walls or in floor all as specified and as directed.

Supply and fix PVC (SWR) 75 mm dia pipes single socketed in any length with rubber ring joints fixed to walls or in floor all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc or for laying of pipes, wells cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan and not exceeding 1.5m depth and getting out in soft/loose soil complete all as specified and directed.

Demolition and breaking up 100/110mm dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

All as per item No 50 above but 150/160mm dia drain pipes complete all as specified and as directed.

Supply and fix 110mm bore plain PVC (SWR) pipes single socketed in any length with solvent leak proof joints laid in trenches or in floors complete all as specified and as directed.

All as per item No 52 above but bore of pipe 160mm dia

Material and labour for concrete bed to drain pipes of 110mm dia in cement concrete 1:4:8 (type D2) using 40mm graded crushed stone aggregate including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

All as per item No. 54 above but drain pipe of 160mm dia

Material and labour for plain cement concrete 1:4:8 type D2 (40mm graded crushed stone aggregate) as in foundations, filling mass concrete etc complete all as specified and as directed.

Supply anf fix 75 mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

Supply and fix 110mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

Material and labour for 75 mm dia. PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Supply and Fix 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.

Supply and Fix UPVC (SWR) branch piece, single (single ‘Y’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed.

Supply and Fix UPVC (SWR) branch piece, single (double ‘Y’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed.

Supply and Fix UPVC (SWR) branch piece, single (single ‘Y’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed.

Supply and Fix UPVC (SWR) branch piece, single (double ‘Y’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed.

Supply and fix 2000ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR part I including dismantling of old water tank of 500ltr capacity.

Supply and fix 20 mm bore of ball brass valves, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and as directed.

Supply and fix stop valves, cast copper alloy 20 mm bore screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and complete all as specified and as directed.

Supply and fix 20 mm bore dia Union brass to connect iron to poly-ethylene & fixed complete all as specified and as directed.

Taking down 15 mm GI steel tubing and connections including for refixing or removal to store complete all as specified and as directed.

Taking down 20 mm GI steel tubing and connections including for refixing or removal to store complete all as specified and as directed.

Supply and laying CPVC water tubing outer dia 15 mm, SDR-11 grade all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

All as per item No.72 above but 20mm bore pipe.

Supply and fix waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms.) complete all as specified and as directed.

Supply and fix PVC flushing cistern 10 ltr capacity low level with inlet ball valve float chain and pull and brackets and flush pipe 32mm dia PVC pipe complete all as specified and as directed.

Supply and fix PVC connection of size 15mm, 450mm long with PTMT coupling etc, complete all as specified and as directed.

Supply and fix Vitreous china wash down water closet pan (pedestal pattern) white etc complete all as specified and as directed.

Supply and fix in repairs Angle Stop valve 15mm PTMT any colour screwed for CPVC pipe (Minimum weight 15mm -90gms) complete all as specified and as directed.

Supply and fix PTMT Grating round 140mm size fixed in position complete all as specified and as directed.

Supply and fix in repairs stop valves, 15 mm CP concealed type screwed down, high pressure, with crutch or butterfly handle, screwed both pipe or for unions and fixed complete all as specified and as directed.

Supply & Fix in repair brass cast copper alloy CP Shower rose 125mm size with shower Arm 15mm size 195 mm long with bend.

Supply & Fix in towel rails 60 cm long brass chromium plated 20mm dia with brackets fixed to walls in repairs complete all as specified and as directed.

Supply and fix in Vitreous China wash basin, white oval type size 630x450mm white, including, waste coupling , waste pipe PVC 32mm, porcelain stopper, brackets and embedded complete all as specified and as directed.

Supply and fix of soap dish Cromium plated coloured approximate size (160mm x 160mm x 90mm) fixed in repairs, complete all as specified and as directed.

Supply and fix pillar taps, fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long body screwed shanks and fly nuts screwed for iron pipe of bore 15mm complete all as specified and as directed.

Supply and fix in 15mm bore Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Suply only Integral Water proofing compound.

Supply and fix in repairs curtain rails 25mm dia anodized aluminium with brackets stops rollers etc complete all as specified and as directed.

Supply and fix in repairs brackets rails etc complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring of light, fan, socket 5/15Amps or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards/sunken box and making good the disturbed of wall/ceiling/floors etc so as to match with the existing surface complete all as specified and as directed.

Material and labour for point wiring for one light point controlled by one switch complete with 1100Volts grade 1.50 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable (Make: Anchor/ Havells/ Plaza/ Finolex/ Polycab) fixed/ drawn through and including white/ ivory colour heavy duty PVC casing/ capping with accessories (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling including PVC board with cover (ISI marked) for mounting switches, sockets, regulators etc and providing one run of 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable as earth continuity wire and connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed.

Supply & Fixing LED lights fitting 1 x 20 watt,220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix socket outlet, 5 pin, 6 Amps, flush type, white finish complete all as specified and directed.

Supply and fix switch flush type, single pole, one way, 6Amps, 240 Volts, white finish complete all as specified and directed.

Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body all as specified and directed.

Disconnecting and taking down ceiling fan of any sweep any make from any position at site, transporting to MES store Yard and dismantling blades, opening the stator and rotor of ceiling fan and providing new lubricating grease in bearing/ bushes, re-assembling, commissioning and testing complete and rehanging/ re-fixing/ placing fan at same location at site including providing nuts, bolts, locking bolts, blade's screws, split pin, rubber real, PVC connector, washers etc. as required complete all as directed. Note: - All major repairs such as replacement of bush, bearing, condenser, shaft, connection wire, winding & painting will be measured and paid separately under appropriate item of Schedule.

Material and labour for removing of burnt winding from ceiling fan 1200/1400mm sweep and rewinding the same with equal gauge of super enameled copper winding wire as per existing, providing insulating paper, varnishing and testing on completion, including transportation of fan to contractor's work shop and bringing back to store etc. complete all as directed.

Material and labour for painting of ceiling fans of 1200/1400mm sweep by scraping all foreign materials with emery paper, cleaning the body, blades, legs, frame and down rod as preparatory work for painting of ceiling fan and painting with one coat of supper enameled white paint with spray painting technique and writing of MES No. with capital letter of size 20mm height and 3mm width with synthetic enameled black paint complete all as directed.

Supply and fix capacitor with PVC clamp of 2.5MFD capacity suitable to fans including removing the old one complete all as directed.

Supply and fix ball bearing of No 6201 Suitable to ceiling fans including removing the old one complete all as directed.

Supply and fix ball bearing of No 6202 Suitable to ceiling fans including removing the old one complete all as directed.

Supply and fix PVC insulated three core wire copper conductor 1100 volt grade of size 0.5Sqmm suitable to fan including removing the old one complete all as directed.

Material and labour for hanging wiring any size fixed in wall and cover with casing and capping in any location of each barrack all as specified and directed.

Manik Constructions