Special repairs to roofing of Bldg No. T-8, P-11, P-13 (MES IB) and Facade, Hard Standing and other misc B/R works in Bldg No. P-10 (Station Canteen) under GE (W) Colaba, Mumbai

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including scafoldings of any height all as specified and directed.

Dismantling of framed work of timber in scantling 40 Sqcm and over in section, in any position all as specified and directed.

S&F hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of all as specified & directed.

S&F Plates (plain or chequered) channels Fe -410 (Gde -E-250 quality -A), square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified & directed

Excavation in post holes (or similar holes) each nexc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm in hard/dense soil all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F of structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape, required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified & directed.

Use & waste formwork special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form work of all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any height all as specified and directed.

S&F 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) all as specified & directed.

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land all as specified and directed.

M&L PCC in foundations, filling and mass concrete type B2 1:2:4 (using 40mm graded crushed stone aggregate) all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, flooring/subbase including necessary shuttering all as specified and directed.

Carefully chipping, removing existing internal plaster upto 12 to 15 mm thick by low impact high frequency hammer/chipper without damaging the original sound brickwork or concrete including removal of POP/ Gypsum plaster if any on walls any thickness, racking of joints, daily cleaning and stacking of debris at prescribed location in polypropylene/ paper bags, disposing off the debris so generated on weekly basis out side the premises all as directed by Engineer-in-charge.

Carefully chipping, removing existing external plaster upto 25 mm thick by low impact high frequency hammer/chipper without damaging the original sound brickwork or concrete including racking of joints, daily cleaning and stacking of debris removing as per complete as directed by Engineer-in - charge.

M&L for old loose spalled concrete should be chiseled from roof ceiling with the help of scrapers chisele & hammer after that cleaning of rust from mild steel rod applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface for 8-10mm Thick ready mix plaster in for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished surfaces even & smooth without using extra cement including two coat OBD over one coat interior primer all as specified and as directed.

M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the cracks upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any height all as specifed and direcetd.

M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height all as specified and directed.

M&L for plastering 20 mm thick average Polymer modified mortar (ready mix pack) in two coats 15 mm base coat and 5 mm finishing coat with and including curing as per manufacturer's instructions all as specified and directed.

M&L for 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished surfaces even & smooth without using extra cement all as specified and as directed.

M&L for 20-25 mm average thick Ready Mix Plaster in multi layer, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including scafolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

Supply only integral waterproofing compound

Providing & applying anti algalwater-based Elastomeric exterior wall finish on newly plastered surface including surface preparation, applying suitable wall Primer and application of two coats of paint by brush all as specified & directed. Note : Height of Bldg Up to fourth floor.

Providing & applying anti algalwater-based Elastomeric exterior wall finish on old as well as newly plastered surface including surface preparation, applying suitable wall Primer and application of two coats of paint by brush all as specified & directed. Note : Height of Bldg Up to fourth floor.

M&L for preparation of newly plastered wall surfaces and applying a coat wall care putty (Birla White Wall care or equivalent) 2mm thick ( in two coat 1 mm each ) avg on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of acryilic emulsuion over a coat of alkali resistant priming paint all as specified and directed.

M&L for two coats of smooth interior acrylic emulsion with Texture finish having VOC less than 50 grams per litre complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions all as specified & directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply two coats of distemper oil emulsion on walls trrough an authorised applicator all as specifed and directed.

M&L for preparation of old decorated surfaces of celling including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat distemper oil emulsion on walls through an authorised applicator all as specifed and directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel all as specifed and directed.

M&L for preparation of new surfaces painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as speciefied & directed.

M&L two coats of synthetic enamel paint over a coat of red oxide on steel surface including preparation of steel surfaces width or girth exc 10cm all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old surfaces with one or more coats all as specified and directed.

S&F in repairs 12mm thick, toughened glass for door shutters, partitions in bathroom or other places, shelves, table top and in similar work with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots all as specified and directed.

S&F Sun control film, 50 micron, non reflective type, sticked to glass as per manufacturers instructions all as specified & directed.

S&F in repairs SS 302 Stain finish Handle D type, 25mm dia 600mm long for glass shutter all as specified and directed

S&F in repairs bottom/top patch fitting for pivot all as specified and directed

S&F in repairs bottom lock patch fitting all as specified and directed

S&F in repairs 300mm, helical door spring rod pattern springs including roller and roller plate heavy duty and fixed all as per manufacturer's instructions all as specified & directed.

S&F in repairs for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instructions all as specified & directed.

S&F in repairs Roller blinds horizontal and vertical type made out of standard fabric, thickness 2mm of approved texture with necessary accessories sample as approved by GE all as specified and directed.

S&F 3 mm thick panel of any type, pattern and shape Aluminium Composite Panel (ACP), aluminium thickness of 0.5mm, Front side finish of aluminum roll coated with Plain / coloured / wooden texture PE / PVDF, Core material of Non-toxic polyethylene, Macro molecular lamination film, Rear side of Aluminum coated with primer and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panel areas will be measured on one side only.

M&L for injection grouting in RCC slab shall be cast/laid to the slope as directed/as per site conditions. After RCC slab is laid, cured and fully set, water shall be ponded in the sunken slab portion as per specified ponding test. The location of seepage/leakage, if any, shall be identified and marked. The portion of the slab where leakage/seepage is observed shall be repaired with grouting at contractor's expences. The area of dripping/leakage shall be cleaned to expose the surface. Mark the spots for injection grouting. If leakage is through a crack, mark grouting points along the crack in a staggered manner. If the leakage is across the area mark grouting spots in a grid pattern. Drill grouting holes so as to neatly fit the injection packers. Drilling to be done at an angle of 45 degree to the plane of grouting surface. Fix PVC/MS nozzles in the low viscosity, polyurethane resin/epoxy grout using a grouting pump. Repeat the process after 1 or 2 days if the leakage continues at some point. allow to cure for 24 hours and seal the grouting holes appropriately using epoxy putty all as specified and as directed.

M&L PCC 1:4:8, type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling, mass concrete and sunken floor treatments all as specified and directed.

M&L for water proofing treatment to sunken slab, walls and shall be carried out as specified below and as directed. (a) Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar. (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious water proof coating can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be over laid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufracture's instructions, finished even and smooth without using extra cement all as specified and directed. Note: WPC shall be measured and paid for seperately under relevant item.

S&F PVC 3D Decorative varrious pattern modern style 5-6 mm thick water proofing wall paper before complete removal of existing treatment by scrapping with mechanical wall sander having cart part Trucare series H-01 with variable speed control 1500-2700 RPM (having mechanical vacuum mechanism) sanding pad of 180 mm having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour fixing on wall using top guard glue adhesive fixed all as specified & Directed. Note:- Wall paper shall be as approved by GE .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified & directed.

M&L for digital coloured glazed ceramic tiles 600x300x7/8mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match with the shades of the tiles all as specified and directed. Note:- Rate of Designer border in vertical surface will be deemed to be included into quoted rates.

M&L Non/Anti Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile not exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of the tiles all as specified and directed by Engr-in-Charge.

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (Square/rectangular) polished, area of each tile exc 0.36 sqm but not exc 0.72 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specifed and directed.

M&L coloured double charged digital glazed vitrified tiles 10 mm thick (Square/rectangular) polished, area of each tile exc 0.36 sqm but not exc 0.72 sqm in vertical surfaces such as skirting & dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specifed and directed.

S&F golden/any colour pencil tiles of size 8-10 mm medium size glossy finish fixing in dado spacing all as specified & directed

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying of floor finishes like tiles all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15 mm thick (Square / Rectangular) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20 mm thick screed bed of in CM (1:6) for fixing tiles all as specified & directed.

M&L machine cut kota stone slab frooring 18-20 thick laid over 15 mm thick screeed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

M&L Granite (of any type and colour) 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.

Dismantling of ceiling board (Pulp insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work all as specified & directed.

M&L GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified & directed. Note:- Frame work for ceiling shall be measured and paid separately.

S&F 8/10 mm thick PVC ceiling or wall panelling (any colour) with aluminium frame work for receiving ceiling board / wall panelling including all necessary accessories for fixing at various levels all as specified and directed.

M&L in repairs 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & including Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm, size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long with & including two coat of oil bound distemper all as specified and directed.

Extra over above items No 65 above for any sunk or raised moulding all as specified and directed.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar all as specified & directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified & as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 but n exc. 4.00 Sqm each all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) area n exc 1.50 Sqm each all as specified and directed.

Taking down shutters of any description area exc. 1.00 Sqm n exc 2.00 Sqm all as spcified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint all as specified and directed.

S&F 35 mm thick 2nd hard wood rail and style plain framed panelled shutters (any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides laminated all as specified and directed including 5 mm thick teakwood leaping alround all as specified & directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size, applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum all as specified & directed

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof all as specified & directed.

S&F 18 to 19 mm thick HDHMR board, prelaminated one side with decorative choice lamination exterior grade, fixed with screws to frame work as in cup board & kitchen cabinet shutters and all other similar works all as specified and directed.

S&F stainless steel 75 mm L shape butt hinges all as specified and directed by Engg-in-charge.

S&F SS 304 grade 200mm length stainless steel cabinet drawers handles all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled stainless steel all as specified & directed .

S&F aluminium anodised 150 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium handle 150 mm cast type anodised all as specified & directed

S&F 200mm size brass handle cast type polished bright all as specified & directed

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed all as specified & directed

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 300mm all as specified & directed

S&F door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm, fixed all as specified & directed .

S&F in repairs 25 mm dia stainless steel decorative type curtain rods to be fitted with stainless steel bracket and all other connected works all as specified and directed by Engineer-in-charge.

S&F Curtain rod stainless steel side brackets of approved quality all as specifed and directed.

M&L in repairs stainless, steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified & directed

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making, provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all as per architectural drawings and the directions of Engineer-in-Charge. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L anodized Aluminium grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/ screwed attachment all as specified and directed. Note :- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd. as per design No. DG 102 , 7.5mm size i.e. 6mm thick and 7.5mm wide or approved design.

S&F sheet glass, ordinary quality, 5.5 mm thick, plain or frosted on one side and glazed with oil putty or fixed with rubber beading in square exc 0.5 Sqm in each pane or as required all as specified and directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm of approved design and fixed with aluminium windows all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate all as specified and directed.

S&F Aluminum alloy anodised sliding door bolts of 300mm long with hasp stapple all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled stainless steel all as specified & directed.

S&F aluminium anodised 100 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium handle 75 mm cast type anodised all as specified & directed

S&F 3 mm thick sheet glass ordinary quality with oil putty in square nexc. 0.5m in each pane all as specified and directed.

M&L in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as specified & directed

S&F in repairs counter Top wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories all as specified and directed.

S&F PVC connection 15mm size PTMT nuts of length 450 mm all as specified & directed

M&L in repairs fancy type CP Towel Rail 61 cm long all as specified and directed.

M&L in repairs CP soap dish all as per cat part all as specified and directed.

S&F in repairs grating square 150mm size of PTMT(minimum 100 gms) all as specified & directed

S&F in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed

S&F as in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of suitable size all as specified & directed.

M&L in repairs 15 mm bore fancy type health faucet with SS hose all as specified & directed.

M&L fancy type 15 mm bore central hole basin mixture table mounted with 235 mm 9 inch long swivel spout and 450 mm long braided connection pipes all as specified and directed.

S&F in repairs Two piece EWC water closet single piece EWC 640 X 360 x 685 mm including cistern, PP soft close seat cover and hinge, fitting accesorries, Accesories set and cistern fittings, fixed with waste coupling and waste pipe all as specified and directed.

S&F in repairs 15 mm bore fancy type 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange all as specified and directed.

M&L in repairs for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed.

S&F in repairs bevelled edge mirror of any size and description all as specified and directed by Engineer- in-charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15 mm dia bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20 mm dia bore all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall and ceiling or laid in floors all as specified and directed

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth all as specified and directed.

M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet all as specified & directed

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces exc 10 cm width and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome all as specified and directed.

Providing and placing in position micro-concrete, grade M40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 40 mm all as specified and as directed by the Engineer in charge. (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)

Taking down Cast iron/AC/PVC pipe of any dia and size fixed on wall or floor including all fittings all as specified & directed

S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and laid in trenches or fixed to walls all as specified and directed. Note : upto any height and including necessary scafolding.

S&F 75mm dia PVC (SWR) bends with access doors of any radius all as specified & directed

S&F 75 mm dia PVC (SWR) vent cowl all as specified & directed

S&F PVC (SWR), 110mm bore, Double socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, at any location, any floor including necessary scaffolding all as specified and directed.

S&F 110mm dia PVC (SWR) bends /elbow any radius including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding all as specified and as directed by Engineer-in-Charge.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets all as specified and directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat distemper oil emulsion on walls complete by an authorised applicator all as apecified and directed

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified and directed.

M&L Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note:- All chases will be cut by chase cutter only.

All as per Srl item No. 136 here in before but for one bell point controled by one bell push .

All as per Srl item No. 136 here in before but for socket outlet point 5 Amp on same board.

All as per Srl item No. 136 here in before but for socket outlet point 5 Amp on Independent board.

All as per Srl item No. 136 here in before but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point)

S&F modular switch 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed.

S&F modular switch 1 way 16 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed.

S&F modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate all as specified and directed.

S&F modular sockets 6A/16A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame all as specified and directed.

S&F modular bell push 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with cover plate all as specified and directed.

S&F call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed.

S&F in repairs Modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed.

S&F modular Fan step/ electronic regulator, 120W - 2 module A module 230/250 volt, AC supply, ISI Marked, with cover plate all as specified and directed.

S&F in repairs ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed.

S&F in repairs LED lights fitting 1x 20W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed.

S&F in repairs LED light fitting 1x9W/1X10W luminaires including LED down lighter light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

S&F in repairs LED Mirror light/ fancy light fitting warm white /white type with lamp 12 Watt with necessary connection all as specified and directed.

S&F in repairs Wall bracket decorative light fancy light fitting warm white /white type with lamp 12 Watt with necessary connection all as specified and directed.

S&F in repairs LED down lighter fancy light fitting warm white /white type with lamp 12 Watt with necessary connection all as specified and directed.

S&F in repairs LED spot light / bed light fitting warm white /white type with lamp 12 Watt with necessary connection all as specified and directed.

S&F in repairs LED foot light fitting warm white /white type with lamp 12 Watt complete with necessary connection all as specified and directed.

S&F in repairs Slim designed LED recessed square 2X 2, 36 watt Warm/ white type flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified

S&F Exhaust fan 230 volts , 250mm, plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall all as specified and directed.

M&L for refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end, dismantling romoving and hanging fan and blades and removing fan and blades to store all as specified and directed.

S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor, BLDC making all electric connection. huck and suitable size rod for hanging ceiling fan all as specified and as directed

S&F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure, powder coated with 100 Amps rated busbar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down all as specified and directed.

S&F in repairs MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed.

S&F in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's all as specified and directed.

S&F in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size including 100 Amps MCCB for incoming and common neutral link all enclosed in standard sheet flush mounting all as specified and directed. Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

S&F in repairs MCCB TPN, 240 Volts, 63 to 100 Amps, 10 kA rupturing capacity 415 Volts all as specified and directed.

M&L in repairs Sub main concealed wiring with two run of 6 sq mm stranded copper conductor PVC unsheathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32 mm dia) for housing the wires for from Panel / Main DB to house SPN DB including taking down old Unsv submain with all associated fixtures complete all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M&L in repairs Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Concled ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Sub main wiring with two run single core 1.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 1.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 1.5 sqmm and one run of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications :-

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

N F ENTERPRISES (BID ID -3244719)

Shivam Enterprises (BID ID -3244562)

Unitech Enterprises (BID ID -3241044)

SAHU AND SAHU CO. (BID ID -3244905)

SAHI SAGAR ENTERPRISES (BID ID -3241704)

Bidder Name

Unitech Enterprises

Frends Enterprises

SAHU AND SAHU CO.

Shivam Enterprises

SAHI SAGAR ENTERPRISES

N F ENTERPRISES