REPAIR OF TOILET WHITE WASHING OF OFFICE BUILDING AND BOUNDARY WALL AND WATER SUPPLY AT SITE PATHARDIH UNDER UMSD CWC RAIPUR

Amount

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Sanitary fitting Providing and fixing white vitreous china water closet squatting pan (Indian type) :Long pattern W.C. pan of size 580 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm

Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PMPT towel ring trapezodial shape 215 mm longs, 200 mm wide with a minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour. Weight not less than 88gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour by 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Electrical work Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. Group A

Providing & Installing ,Testing 1 HP submbersible pump ( One No) of reputed company in Bore well with Penal box,MCB, Starter etc. as required to the satisfection of Engineer in charge.

Providing and fixing M.S. Clamp of 150mm dia to the top of casing/housing pipe of tubewell as per IS:2800(Part 1),including necessary bolts & nuts required size complete.

Supplying and fixing 3 × 2.5 sq mm FRLS PVC insulated copper conductor, single core cable from submersible pump to penal board as required.

Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia to be used as water extraction pipe from boring .

Supplying and fixing PVC insulated GI Rope from submersible pump to outside and proper anchoring for holding pump as per direction of Engineer in charge.

Providing one number Syntex or equivalent water storage tank with cover & suitable locking arrangement of capacity 1000 litre over roof of building after making one suitable base for keeping in position to the satisfection of Engineer in charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge to be used as outlet pipe from over head tank & distribution pipe. By 40 mm OD pipes as outlet pipe from overhead tank to different buildings

By 20 mm OD pipes as distribution pipes inside different buildings

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

20 mm nominal bore G.I. Union including cutting and threading the pipe and making long screws complete wherever required

40 mm nominal bore G.I. Union including cutting and threading the pipe and making long screws complete wherever required

Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay F.P.S. (non modular) bricks

Making one platform of size 4' × 3' around tube well by brick & 1:2:4 cement concrete to the satisfection of Engineer in charge.

Providing, laying and jointing 150 mm dia glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement:1 fine sand) including testing of joints etc. complete . Drain pipe from platform to outside boundary

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round 150 mm dia S.W. pipes including bed concrete as per standard design. All-round 150 mm dia S.W. pipes of Sl. Number 18

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairing of damaged plaster by 12 mm thick cement plaster in CM 1:6 (1 cement: 6 coarse sand)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

RAJ KISHOR DEBTA