Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹40.1 L+₹7.3 L (22.2%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹42.9 L+₹10.1 L (30.8%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹93,820
Closing Date
28 Sept 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
REPAIR AND MAINT OF ROOF LINTEL CHAJJAS AND REPAIR TO RCC STRUCTURE COMPONENTS OF BLDGS UNDER AGE BR I NEW NAVY NAGAR COLABA MUMBAI
2022_MES_547337_1
8256/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class D Category
a (i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹93,820
Yes
25 Nov 2022
24 Aug 2022
29 Sept 2022
24 Aug 2022
28 Sept 2022
15 Sept 2022
24 Aug 2022 - 21 Sept 2022
Amount
M&L for providing and spraying white,pigmented, wax based dispersion compound incorporating a special alkali reactive emulsion breaking system compound (comply with ASTM C309-90) over the plastered surface. This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability. It shall have a specific gravity of 1.02 and the minimum application temperature shall be 10°Ccomplete all as specified and directed by Engineer-in-charge.
M&L for applying polymer modified primer for steel having MuCis technology and which is a blend of Portland cements, graded fillers, corrosion inhibiting additive, and re-dispersible polymers in powder form that when mixed with water forms slurry for application by brush to cover exposed reinforcement. The product shall achieve an adhesion bond strength of 1 MPa to steel. It has got a pot life of 30 minutes @ 30°C. The touch-dry time shall be 10-15 minutes @ 30°C. The mixed density shall be 2.01-2.05. The water/powder ratio by weight shall be 0.3. It shall achieve coverage of 2 kg /Sq.Mtr @ 1.0mm thickness, applying on visible reinforcement surfaces to form a continuous film not less than 1mm thick and preparing the surface to receive concept of epoxy grout mortar act including providing necessary proportions, bracing and runners to relieve the members from the load coming on it including scaffolding with working platform as required and as per design and pattern including preparing the surface to match with the existing surface,complete all as specified and directed by Engineer-in-charge.
M&L for repair to cracks and damaged existing surfaces by structural strenghtening using epoxy injecting grouting with and as under . (a). Fixing of GI nozzles in zig-zag fashion not more than 50cm c/c on RCC surfaces on all directions as required after drilling holes in concrete, fixing GI nozzles with fast setting mortar and covering with renderoc plug. The size of holes shall be 20mm dia and 75mm in depth. (b). Epoxy injection grouting shell be carried out by using standard pressure grouting pump after mixing design and hardner to the extent till refuse to accept further grout complete. (c). Catting and flushing of nozzles with surface after competing grouting and sealing the nozzles with cement morter (1:1) and preparing the surface to match with the existing surfaces complete all as specified and directed by the Engineer-in-Charge
M&L for applying 20-25 mm screed with single component cement based Polymer modified fibre reinforced mortar to produce a thixotropic mortar . The product shall achieve a compressive strength of 15 MPa in 1 day & 45 MPa in 28 days and a flexural strength of 7 MPa @ 7 days.cement and sand can be used for finishing the surface even and smooth. It shall compensate both plastic and hardened shrinkage and have minimum direct adhesive bond strength of greater than 2 MPa. It shall be alkaline, compatible with host concrete with similar thermal properties and shall achieve a elastic modulus of minimum 25 kN/Sqmm.complete all as specified and directed by Engineer-in-charge.
Taking down unserviceable cement plaster loose/unsound weaken cement concrete of any description and in any position from existing surfaces with power driven of pneumetic chisel and removal upto the approval municipal dumping ground outsides MOD land complete all as specified and directed by engineer-in-charge.
M&L for applying two coats of Epoxy Resin Based Concrete Bonding Agent for proper bonding between old surface with micro-concrete/new surface.The bonding agent shall be a two component solvent free epoxy supplied as ready to use at site. The product shall have a minimum pot life of 120 Min at 35°C and an open time of atleast 4-6 Hours @ 30°C up to which new concrete can be poured.
M&L for providing and applying blend of Portland cement, graded fillers and chemical aditives which impart controlled expansion and should be ready to use and can fill convoluted voids, compensates shrinkage at both plastic and Hardened states having compressive strength (BS 4551-80-60) MPA at 28 days, Tensile strength (ASTM C 348)-2.0 N/mm @ 28 days, Flexural strength (ASTM C 348)-9 Notes: 1. Minimum thickness to be used is 50mm with addition of 10mm down aggregates of 25% of the weight of mix ready to use powder with water- powder ratio of 0.18. Strength of 1 day to be 20N/mm2. Time of expansion to start after 20min of mixing and finish in 120 min of mixing Epoxy bonding agent having mix density of 1.45 to 1.5 kg/ltr, compressive strength (BS-6319 PT 3)-25 Mpa at 7 days & bond strength (ASTM C 881)-11 N/mm2 at 7 days, having an over lay time of 3 hrs at 30°C. 2. The covering capacity of chemicals indicated is as per manufacturer's instructions. It may vary as per the substrate on plus side and contractor shall have no claim whatsoever on this account, complete all as specified and directed by Engineer-in-charge.
M&L for treating the existing pipe penetrations using non-shrink, free flowing, cementitious grout .The compressive strength of the grout must exceed 50 N/mm2 at 7 days and 60 N/mm2 at 28 days. The flexural strength of grout must exceed 9N/mm2 @ 28 days. Fresh wet density of the mixed grout must exceed 2150 kg/m3. Further flashing the area using solvent based UV resistant polyurethane based waterproofing material having minimum tensile strength on 4 N/mm2 and minimum elongation of 800%. Complete all as specified and directed by Engineer-in-charge.
M&L for providing and filling epoxy putty into RCC crack after opening up RCC cracks in V-groove manner approximate 10 mm wide & 10mm deep using mec nical cutter, properly cleaning the same to remove loose dust, dirt etc. And filling the same using three component, the solvent free, thixotropic Epoxy resin based putty having 100% solid contents mixed density of 1,6 g/cc, compressive strength — 50 N/mm2 , pot life of 40 minutes at 27 degree C, Drying time 8 hrs. recoatable time 24 hrs. And finishing in line and level with existing concrete surface etc. complete all as specified and directed by Engineer-in-charge.
Taking down old existing unserviceable cement plaster, loose / unsound weaken cement concrete of any description and in any position from existing external surfaces of wall, roof , chajja etc with power driven of pneumatic chisel and and removal upto the approval municipal dumping grounds specified by the local bodies out oside MOD land including cutting of all edges, making square shoulders of the cavities, roughening the smooth surfaces, scrapping out / removing corrosion all loose / scale / rust etc from the visible reinforcement by applying rust remover and cleaning the steel reinforcemnt properly and then applying single component cementitious corrosion inhibiting primer for steel reinforcement on visible reiforcement surfaces to form a contineous film not less than 1 mm thick and preparing the surface to receive concrete of epoxy grout mortar etc including providing necessary proportions, bracing and runners to relieve the member from the load coming on it including scaffolding with working plat form contractor shall have no claim whatsoever on this account, complete all as spcified and directed by Engineer-in-charge
M&L for providing and applying a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion, should be ready to use and can fill convoluted voids and cracks , it should componsates shrikage at both plastic and Hardened states. W/P ratio of 0.18. Strength of 1 day to be 20N/mm2. Time of expansion to start after 20min of mixing and finish in 120 min of mixing epoxy bonding agent having mix density of 1.45 to 1.5 kg/ltr, compressive strength (BS-6319 PT 3)-25 Mpa at 7 days bond strength (ASTM C 881)-11 N/mm2 at 7 days, including all tools and tackles as per accepting officer, complete all as specified and directed by Engr-in-Charge.
M&L for MS TMT bars 8mm dia and over as in reinforcement cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends & binding with and including MS annealed wire not less than 0.9mm dia complete all as specified and directed by the Engineer-in-Charge
M&L for providing and fixing welded MS wire mesh weighing not less than 1Kg/Sqm of size on the prepared surface & surface should be cleaned and be removed from dirt, fungus and all foreign material complete all as specified and directed by Engineer in Charge.
M&L for applying Polyster Resin based Anchoring material in concrete before fixing nozzle it should typically attains a compressive strength in excess of 20N/mm @ 3 hours and and ultimate compressive strength of 70N/mm in 7 days (50mm x 50mm x 50mm)when tested as per BS 6319 Part 2 : 1983. complete all as specified and directed by Engr-in-charge.
M&L for applying a cement based powder, modified with special additives and ready to use. Mixed with water, it cures forming a coating, with limited thickness which resists the penetration of water to achieve compressive strength of 36 N/mm in 3 days, adhesion bond strength of 8.2 N/mm Coating to be applied after proper surface preparation to remove loose dust, Cleaning, Mixing using slow speed electric drill and application of 2 coats. complete all as specified and directed by Engineer-in-charge.
M&L for form work to sides and soffits of lintels, beams, columns, shelves, chajjas including overhangs etc for fair finished flat surface, complete all as specified and directed by Engr-in-charge
M&L for application of Water based acrylic polymer primer cum sealer coating on prepared surface having high performance copolymer emulsion, formulated to achieve specific performance characteristics that shall dry to a transparent finish and supplied as a single component white liquid to exposed concrete or masonry surface after proper surface preparation,cleaning of dust,dirt etc. The system shall form a film and shall have excellent water retention after film formation. complete all as specified and directed by Engineer-in-charge.
M&L for providing and applying anti-yellowing coating, The coating to be applied on wall shall be liquid applied highly durable waterproof coating system for wall, based on high quality acrylic emulsion, functional filler, sunlight stable pigment and quality fungicides. It shall have properties that provide features like crack bridging ability, breathability, flexibility & exterior durability and resists micro-organism growth.It shall cover hairline cracks up to 0.5 mm effectively. It shall have excellent crack bridging ability and shall bridge cracks up to 2 mm width. The elongation at break is approx. 220 %. The tensile strength is 0.7 Mpa. It has a hardness shore ‘A’ scale of 80, with an adhesion strength of 3.4 Mpa. The coating is UV resistant, algae and fungus resistant, and has a water vapor permeability of 40 gm/m²/day and a crack bridging ability of 1-2 mm. The coating must be applied with temperature above 5°C and below 45°C. The coating shall be applied in two coats of by roller or brush application at the interval of 4-6 hours.Allow applied coating to dry or cure for 3 days complete all as specified and directed by Engineer-in-charge. Make : Thermax Ltd, Trimurti (India), Tiki tar Danosa (Pvt) Ltd
M&L for drilling hole chemical anchoring of reinforcement on existing surface with Hilti HIT-HY 70 or equivalent, minimum hole depth 150mm, steel bar 10mm dia and drill bit dia 12mm, complete all as specified and directed. Make: HT-V-R- M12x150 of Hilti Chemical anchoring polyester resin grout having compressive strength of 20N/mm2 @ 3 hours and an ultimate compressive strength of 70N/mm2 in 7 days (50mm x 50mm x 50mm)when tested as per BS 6319 Part 2 : 1983, complete all specified and directed by Engineer-in-charge.
Note: (a) The work for item Sr No. 1 to 22 to shall be executed directly by company or their authorized applicator. Application shall be authorized in writing by company and guarantee/responsibility of work executed shall be owned by Contractor in writing for 5 years. (b) Quoted rate shall be inclusive of material all labors tools and plants scaffolding and working upto 15 mtr height. (c) Adoption of necessary safety arrangement like safety belts. ropes. helmets, netting etc. which are required for safety of working at height etc. which are required for safety of working at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be inclusive on quoted rates.
M/s Raghav Traders
M/s R.D. Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .