E.I. work

Amount

Dismantling the existing damaged BDB, switch board, wiring, cable, fittings & fixture as required very carefully & carrying the same to safe place as per direction of EIC.

Supply & Fixing 240 V, 20 A Piano key type socket (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC (Power Plug).

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

S & F 250V 25A Timer controller for AC machine in SS double door (IP 42/43) 2+12-way DB enclosure (Make:- L&T/Schnider/ABB Elegance) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC :- i) 10kA, C-Curve, 240V, 25A DPMCB (LK/Schnider/ABB Elegance) --- 1 No ii) 24 Hr programmable Digital Timer (LK make cat no 67DDT0) ---- 1 No iii) 3 pole power contractor (LK make cat no MNX 22/230V) with 1 NO +1 NC additional contact block ---- 2 sets iv) 2 Moduler AC motor stater (Make:- Legrand/Myrius) ---- 1 No. v) 2 Module plate with cover (Make :- Legrand/Myrius) -- 1 No vi) 20A Auto-Off-Bipass SPDT toggle switch (Approved/reputed make) ---- 2 Nos. vii) 10A SPST Moduler type switch (Make :- Legrand/Myrius) - 1 No. viii) Outgoing connector make ELMAX (Approved/reputed make) - 2 Nos. (Single Phase Twin Timer)

SITC of 2.0 Tr capacity window type room Air Conditioner with refrigerent R410/R470C/R32 fitted with power saving rotary compressor having turbo cooling capacity 4935 watt suitable for operating at 230 +/- 10% 50 Hz. Single phase AC supply with minimum EER 2.73 discharge air flow volume (CFM) HxLxM 475/400/350 having features with turbo fan modes (Auto,Cool,Fan,Dry) with anti dust air filter bio/active carbon/dust air filter with Star rating- 5 with 15/20 A Plug Top (Anchor). (Make: O General/Mitshubishi Heavy Industries/ Mitshubishi Electric/as per direction by EIC)

Supply, fabrication & fixing of 2 nos L- type structure made of MS angle, whose two legs of unequal length (The dimensions of an MS Angle are typically specified by the length of each leg minimum lenght is 1 ft X 1.8 ft), forming a 90-degree angle, one side grouted/ fixed in wall and another end of both L-type structure should be welded each other by 50X50X5mm MS Angle of lenght 28.5 Inch and forming rectangular shape platform for Window AC. Both the L-type structure should supported by MS angle of lenght of 1 ft and forming cantilever type support. Cantilever Support Should be 45 degree with Wall. Two nos. 25X5 MS Flat (Lenght of 29 Inch) should be welded between mid position of Longer arms and shorter arm of L-Support. 2 nos MS angle lenght of 6 inch must be welded in end position of longer arm of L-Type support. Total structure made by 50 mmx 50 mm x 5mm MS Angle and 25 mm x 5mn flat. All the MS Iron Structure should be paint by 1 Coat of RO paint and 2 coat of Enamel Paint incl. welding, carriage and transportation, scaffolding if required, dismantling, cutting the grill/wall as required, fabrication & re-installing window grill with 2 nos. window type AC machine support with all accessories.

Supply & Fixing 26 SWG galvanized base tray for WRAC for water Storage with 1/2 inch ripple fixing by Clamping arrangment as per direction of E.I.C.

Supply & fixing of 1/2 inch dia Braided PVC flexible pipe for AC Drain Water fixing.

Supply and fixing of Jubilee clamp Size: 1/2 Inch

Supply & laying of 32 mm dia PVC Drain Pipe (Medium) including S&F necessary fittings (Make: Supreme/ Oriplast/ Finolex)

S & providing ACP out door typeSheet to cover/close the outside hot air into the UPS Room for better service of AC/UPS including the cost of 3 mm thick ACP sheet as per manufacturer's specification to the existing wall/light partition/window on the frame work fabricated from Aluminium hollow rectangular section of size 50mm x 25mm (2mm thick) & duly suspended/fixed by Aluminium hollow rectangular section of size 50mm x 38mm (2mm thick) and silicon sealent complete in all respect incl. all necy items as per direction of EIC. (Make: Aludecor/Armstrong)

Less: Cost for unservicable Dismantled materials Rs. - 2000/-

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

ATREYA INDUSTRIAL POWER SOLUTIONS LLP (BID ID -6130397)

MODERN ELECTRIC (BID ID -6114512)