Repair and maintenance with providing back up power through 100 kVA, DG set to transport office Diesel Dispensary Unit, Exv workshop, PE(X) and PE(EnM) office under AADOCM, Dhori Area

Amount

Erection of steel tubular pole of length exceeding 10 mtrs but not exceeding 12 mtr in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required ( pole supply by department )

Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc. as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supply and erection of galvanised 'D' iron clamps complete shackle insulator (100 mm X 110 mm), GI bolts, nuts and washers, coach screws etc as required

Supplying and erection of 100 mm X 80 mm pin insulator complete with G.I. spindle and nuts etc. as required

Supplying and erection of stay set complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turnbuckle (20 mm X 60 cm), 7/4.00 mm dia G.I.stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required

Supply and providing of copper conductor cable two core of 16 sqmm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushoning, protective covering and refilling the trench etc as required. Upto 35 sqmm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushoning, protective covering and refilling the trench etc as required. Upto 35 sqmm (clamped with 1 mm thick saddle)

Supply and providing of 400 Amps/415 V TP&N switch

Supply and fixing DP sheet steel enclosure on surface/recess along with 25/32 amps, 240 V "C" curve DP MCB complete with connections, testing and commissioning etc as required

Supply and fixing of 25 mm iron saddles

Total impact of GST for the purpose of CTC

M/S NATIONAL ELECTRICAL WORKS

Balajee Traders