REPAIR AND MAINT OF STREET LIGHT FITTINGS, GARDEN LIGHTS, GATE LIGHT FITTING AND OTHER CONNECTED WORKS OF ZONE-I AT FATEHGARH CANTT

Amount

Taking Down street light fluorescent tube/HPSV/HPMV/T-5 fitting/ LED Fitting any capacity from pole, walls and dismantling for checking of unserviceable driver and re-fixing in existing position after repairs for proper functioning complete all as specified and directed. Note:- ( Spares required for repair shall be paid under supply only items)

Supply only LED street light driver suitable for 36/45W LED street light complete all as specified and directed.

Supply only LED street light driver suitable for 60/70/90 W LED street light complete all as specified and directed.

Supply only LED street light driver suitable for 120W LED street light complete all as specified and directed.

S & F in replacement cable PVC insulated and PVC sheathed three core 1.5 sqmm copper conductor multistranded complete all as specified and directed.

M & L for DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 3.5/4 core and fixed to the PCC/Steel Poles by means of suitable size of clamps with nut and bolts including dismantling of old junction box complete all specified and directed.

S&F in replacement of LED 60 Watt powder coated pressure die cast aluminium SMD street light with heat resistant toughened glass with lens complete all as specified and directed.

S&F in replacement of LED 70 Watt powder coated pressure die cast aluminium SMD street light with heat resistant toughened glass with lens complete all as specified and directed.

S&F in replacement of LED 120 Watt Flood light with powder coated pressure die cast aluminium housing , complete with all accessories complete all as specified and directed.

S & F in replacement pole mounted enclouser made of UV stabilized, FR grade special moulding compound having facility duriation base switching ON / OFF of capacity 5 KW, Three phase, with suitable size of FI clamps 02 Nos with the following accessories and all as directed. (i) contactor 40 amps. = 01 No. (ii) MCB 40 Amps(SP),10 KA ,240 volts. = 03 Nos (iii) NATURESWITCH = 01 No (IV) Digital time switch crono= 01 Nos

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth strip 25 x 4 mm by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No. 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out soft loose soil complete all as specified and as directed for foundation of stay etc.complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well remmining in layers not exc 25 cm.complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

Supply and lay sand with approved fine grade around cable in cushioning for protection of under ground cable complete all as specified and as directed

Supply and lay burnt best quality locally available old size sub class 'B' bricks laid in trenches perpendicular to U/G cable for cable protection complete all as specified and as directed.

Laying only serviceable bricks obtained from the items specified here-in-before (i.e during taking out of under ground cable),laid flat dry, in trenches with width of the bricks laid to the axis of cable for protection of cable complete all as specified and as directed

Boring holes horizontally under road without damaging the surface of road ( minimum 1.0 Metre below the road surface with the help of GI tubing not exc 80 mm bore(dia) for passing UG cable, complete all as specified and as directed. Note : - GI Pipe laid will be measured and paid separately under respective item

S&F in replacement of 40 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified .

Taking out unserviceable LT UG cable from trenches 6 Sqmm to 10 Sqmm size 2/4 core complete all as specified and as directed.

Supply, layig, connecting, testing and commissioning of 10Sqmm 4 Core under ground LT cable XLPE insulated screened, PVC bedded, armoured heavy duty electric cable confirming to IS : 7098-1985 with stranded aluminium conductor 1100 volts laid in trenches, floor, fixed to walls/drawn through pipe, duct or along the pole and incl the disturbence surface of road making good with using PCC, fixing the cable with suitable size glands, crimping type lugs etc all as specified and directed.

Supply, layig, connecting, testing and commissioning of 06 Sqmm 2 Core under ground LT cable XLPE insulated screened, PVC bedded, armoured heavy duty electric cable confirming to IS : 7098-1985 with stranded aluminium conductor 1100 volts laid in trenches, floor, fixed to walls/drawn through pipe, duct or along the pole and incl the disturbence surface of road making good with using PCC, fixing the cable with suitable size glands, crimping type lugs etc all as specified and directed.

M/S CHAUHAN ELECTRIC WORKS (BID ID -3079118)