Restoration of rain damages to W.S.S Sarodi Sultanpur in G.P Dramman in Tehsil and Distt. Chamba

Amount

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting hard or soft rock by chiseling where the blasting work is prohibited slushy daldal and saturated soil I/c pumping or bailing out water with in all heights, stacking the excavated soil with in 15cm (Fifteen centimeters) when required in to plinths, sides of foundation consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts as per direction as satisfaction of Engineer-in-Charge.

Providing and laying cement conrete 1 : 3 :6 ( 1 cement : 3 sand and : 6 grade stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth upto all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete 1:1.5:3 (1: cement :1.5 sand :3 graded crushed stone agg. of 20mm. Nominal size) and curing complete excluding the cost of form work in

RCC work in Columns, Pillar posts and struts upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge.

Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in

Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing mild steel/tor steel (reinforcement for RCC work) including bending,binding and placing in positioncomplete in all respect including all leads and lifts as per the direction and entire satisfaction of Engineer-in-Charge.

Brick work using common burnt clay building bricks of approved quality in super structure in cement mortar 1: 6 (1 cement : 6 sand) above plinth level up to floor two level (2nd class bricks) in Supper Structure

Half Brick work using common burnt clay building bricks of approved quality in super structure in cement mortar 1: 4 (1 cement : 4 sand) above plinth level up to floor two level (2nd class bricks) Structure

15mm thick cement plaster in single coat rough sides of bricks/ stone masonary for interior plastering up to floor two level including arrises internal rounded angles chamfers and/or including arrises rounded angles not exceeding 80mm in girth and finished even and smooth in cement morta 1:6 (1cement:6sand) with in all leads and lifts as per the direction of Engineer-in-Charge

6mm cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand) with in all leads and lifts as per direction of Engineer-in-Charge.

Provding and fixing panelled glazed or panelled and glazed shutters for doors,windows and clearstory window, including black enamelled iron butt hinges with necessary screws in 2nd class deodar wood within all leads and lifts as per direction of Engineer-in-Charge

Providing and fixing anodized aluminium MS tower bolts (barrel type) with necessary screws etc. complete (200x10mm) including all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing anodized aluminium M.S.sliding door bolts with nuts and screws etc complete (250x16mm) within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing anodized aluminium MS handles with necessary screws etc. complete 125 mm including all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing anodized aluminium MS handles with necessary screws etc. complete 100 mm including all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing oxidised MS hooks and eyes 250mm with in all leads and lifts as per direction of Engineer-in-Charge.

Applying Birla White wall care Putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose, materails and other to give matters sand parpered smooth to give final matter finish to the surface complete With in all leads and lifts as per the direction of Engineer in Charge.

Distempering (Two coat) with oil bound washable distemper of approved brand and manufacture and of required and of required shade on undecorated wall surface to give an even shade other and i/c a priming coat with distemper of approved brand and manufacture thoroughly brushing the surface free from mortar droopoing and other foreign matter and also i/c a priming coat with distemper primer of approved brand and manufacture thoroughly.with in all leads and lifts as per direction of the Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by the throughly cleaning oil grease dirt and other foreign sand papering and knotting. Ready- mixed paint brushing wood primer pink within all leads and lifts as per the direction of Engineer-in-Charge.

Painting two coat (excluding priming coat)on pereviously painted on wood and wood based surface to give an even surface including cleaning the surface of dirt dust and other foreign matter sand papered smooth and including a coat of wood filler paint within all leads and lifts as per the direction of Engineer-in-Charge

Gourav Ratra (BID ID -556411)

Ravinder Kumare (BID ID -556460)