REPAIR MAINTEMENCE TO JOINERY SANITARY FITTINGS AND CERTAIN MISCELLANEOUS REPAIR WORKS AT NGV, KORAMANGALA AND AT VOC UNDER AGE B R II IN GE CENTRAL BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing serviceable tiles to MES store and removing the rubbish/debris out side MD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position (other than ground floor) not otherwise specifically provided for (in roof/floor/padding etc) and removing debris outside MD land complete all as specified and directed.

Taking down cement plaster on brick/concrete block or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing debris outside MD landcomplete all as specified and directed

Taking up or down 20mm bore, steel tubing galvanised along with fittings or any other type of pipe complete all as directed.

Taking up or down 25mm bore, steel tubing galvanised along with fittings or any other type of pipe complete all as directed.

Taking down chowkats or frame, not exceeding 1.5 Sqm in each with shutters (ie without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Taking down shutters,exc 1 Sqm but not exceeding 2.0 sqm in each and refixing shutter in the same opening including easing & adjusting complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M & L for running arc welding in repairs using 6mm dia elctrode, thickness of metal to be welded n exc 6mm including bevelling of edges as required and grinding/filing to sufraces for smooth finish complete.

M&L for 35 mm thick 2nd class hard wood factory made glazed/gauzed skeleton shutters for door, open rebated and prepared to receive glass, gauze etc (without sash bars), edges framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc; size of the members of shutters as specified in SSR Part- I, Section 8, clause 8.24(a) complete all as directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

S&F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) fixed/sliding type window/ventilators, aluminium sections weighing not less than 0.55kg per metre, all are made of from aluminium anodised section including necessary, jointing cleat, glazing clips, rubber packing anodised aluminium snap beading, aluminium fittings such as peg stay 150mm long, hinges 100mm long, suitable handles, screws of suitable size locking arrangement, etc complete all as specified and directed by the Engr-in-Charge.

S & F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows and ventilators with one or more rebates including jointing cleats for fixing etc complete all as directed.

S & F aluminium grill (anodised transparent or dyed to required shape according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre distance including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all as per requirement and as directed. NOTE: - Opening size and thickness of grill shall be as approved/directed by the Eng-in-charge.

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel bearing ISI marked complete all as specified and directed.

S & F in repair 100 mm size, butt hinges, medium weight, cold rolled mild steel bearing ISI marked complete all as specified and directed.

S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F in repair 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F in repair 100 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F in repair 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F 100 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F in repair aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S&F in repair mortice lock, 100mm size, brass, vertical type, 4 lever with minimum 2 keys all as directed.

S & F in repair 40mm dia brass cupboard knob, bright finished, fixed with nut, screw and washer complete of approved make and design as directed by Eng-in-charge.

S&F in repair brass cromium plated, 15mm dia hole, magic eye all as directed.

S & F in repair 175 to 250 mm aluminium anodised, hat and coat hook, solid body fixed with chromium plated screws complete all as directed.

S & F in repair stainless steel safety chain to door fixed with steel screws complete all as directed.

S & F in repair brass drawers/lockers lock, grade - I, size 50mm, 4 lever of approved make and design as directed by Eng-in-charge.

S & F continuous (Piano) hinges, mild steel bright finished or electro galvanised, width of flaps 40mm when open complete all as directed.

M&L for 18/19mm thick MFD board exterior grade both sides with decorative choice lamination and 3 mm thick teak wood beading/ edging fixed with screws to timber frame work as in wall mounted cabinet/racks complete all as specified and directed

S & F in repair 100mm aluminium anodised, hasp and staple, safty type, with hinge pin, including bolt to hinge plate and fixed with screws complete all as directed.

S&F in repair mild steel powder coated body door stopper with hard drawn steel spring, 150mm size fixed to door all as directed.

S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4 mm thick, sheet glass, figured/ pin headed glass and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for stainless steel wire cloth 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed

S&F in repair stainless steel wire cloth 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed

M & L for Plain cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in filling of sunken floor, foundation filling etc complete all as specified and directed.

M & L for applying two coats of blown bitumen, any grade, applied hot in concrete surfaces at the rate of 1.50 kg per sqm

M & L for rendering 10 mm thick in cement mortar 1:3 using WPC @ 3% by weight of cement or as instructed by manufacturer on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement as in sunken floor and wall complete all as specified and directed. Note : WPC shall be measured and paid in separate item as supply only.

M & L for joint free non-skid, ceramic, coloured tiles, Grade B II(a), 8 to 10mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

"Supply only" liquid water proofing compound (ISI marked) complete all as specified and directed. (Make : Dr FIXIT/Fosroc/choksey)

M & L for glazed ceramic joint free, coloured tiles, 450x350mm, Grade B III, 7 to 8 mm thick as in dado/vertical surface of wall/ skirting including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on stone masonry or other than fair faces of brick work or one side of lathing in cement mortar 1:6 followed by 10 mm thick setting coat in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of primer including 1 to 2mm thick wall care putty complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes, Type 'B', single socketed,in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes, Type 'B', single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with solvent cement joints fixed to wall using MS holder bat, etc complete all as specified and directed.

S & F 75 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with solvent cement joints fixed to wall, using MS holder bat etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S&F PVC (SWR) branch piece, single,(single Y) 110 mm dia equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) branch piece, single,(single Y) 75 mm dia equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) branch piece, double,(double Y) 110 mm dia equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) branch piece, double,(double Y) 75 mm dia equal or unequal with access door complete all as specified and directed.

Supplying and laying of 20mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe, flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with recessed bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivalent of Parryware/Hindware/Prayag

S&F in repair Vitreous China Wash hand basin , white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, including provision of 32 mm waste coupling brass chromium plated suitable for wash hand basins & 32 mm dia LDPE PVC waste pipe, 45 cm long PVC connections including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge. Make of basin CERA Cat No S2040105 or equivalent of Parryware/Hindware/Prayag

S & F in repair 32mm dia, not exc 1.00 metre long, low density polyethelene (LDPE) pipes plain/corrugated type of pressure rating 6 Kgf/Sqcm with connecting brackets fixed to waste coupling for wash basin/urinals/sink etc complete all as directed.

S & F in repair 40mm dia, not exc 1.00 metre long, low density polyethelene (LDPE) pipes plain/corrugated type of pressure rating 6 Kgf/Sqcm with connecting brackets fixed to waste coupling for wash basin/urinals/sink etc complete all as directed.

S&F in repair stainless steel gratings, circular type, 125mm dia with/without waste hole fixed with white cement in existing traps complete all as directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe 32mm dia, float and handle including PVC connection pipe of 15mm dia, 600mm long, brackets complete all as specified and directed. Make: CERA Cat No B1010109 or equivalent of Hindware/Prayag/Parryware

S & F in repairs PVC connection pipe with PTMT nuts, 600 mm long. Make: CERA/Hindware/Parryware/PRAYAG

S & F in repairs 32mm dia waste fittings, brass chromium plated fixed to WHB with long screwed shank and fly nuts complete all as directed.

S & F in repairs 40mm dia waste fittings, brass chromium plated fixed to sink with long screwed shank and fly nuts completeall as directed.

S & F in repair PVC flush handle including connecting rod & shiphon washer suitable for 10 litre capacity PVC flushing cistern complete all as directed.

S & F in repair PVC syphon set with knob complete suitable for 10 litre capacity PVC flushing cistern complete all as directed.

S&F in Repair Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified & directed by Engineer-in-charge.

S & F in repairs, PVC, water closet seat and cover, white/black closed pattern with recessed bottom, mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed.

S&F in repair PVC bathroom mirror cabinet best quality of approximate size 430x330mm fixed to wall using brass screws complete all as directed. Make : MAKE: - PRAYAG Cat No 551 or equivalent of Hindware/CERRA/Parryware

S & F health faucet brass body including wall hook, cast copper alloy & 1 metre long flexible stainless steel braided connection pipe suitable for 15mm bore pipe complete all as specified and directed. Make CERA Cat No F 8030301 or equivalent of Make : Hindware/Parryware/Prayag

S&F in repair 15 mm bore bib taps cast copper alloy chromium plated with capstan head screwed down to iron pipe, fancy type long nose type complete all as specified and directed

S & F in repairs brass, chromium plated, 15mm bore wall mixer with L bend for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8475 or equivalent of Make Hindware/Parryware/CERA

S&F 2 way 15 mm bore bib taps with double handle quarter turn fancy type with flange cast copper alloy chromium plated with capstan head screwed down to iron pipe complete all as specified and directed. Make: CERA Cat NO F1018163 or equivalent of Make Hindware/Parryware/PRAYAG Cat No 8312

S & F in repair 15 mm bore, stop cock, cast copper alloy with crutch or butterfly handle , screwed down, screwed both ends for iron pipe or for union/brass ferrule complete all as specified and directed.

Taking off leakage bib tap, pillar cock, stop/angle cock, & shower rose etc for carrying out repair/ replacement the same in old position after cleaning, replacing washer, spindle and adjusting screws etc complete all as directed.

Taking off leakage hot and cold wall mixer valve/ basin mixer tap etc for carrying out repair/ replacement the same in old position after cleaning, replacing washer, spindle and adjusting screws etc complete all as directed.

Replacing old unserviceable steel bracket for wash hand basin (Flat or angle back) including cutting for pinning in end of 12mm dia bolt erecting stand, inlet and outlet screwed for pipe or connection including necessary packing all as directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia 'D' type, 600mm long between flanges complete all as specified and directed. Make :- CERA Cat No F5007103 or equivalent of Make Hindware/Parryware/Prayag

S&F in repair plate rack made of stainless steel fixed to wall, approximate size 786mmX 914mm X 254mm (Make: Prayag Cat No P-348 or equivalent of Parryware /Blue Star/Nirali/Hindware/Cera)

S&F in repair 20 mm dia aluminium anodised powder coated curtain rod/towel/ward rope rod etc complete all as specified and directed

S&F in repair aluminium anodised powder coated bracket suitable for 20mm dia curtain rod/towel/ward rope rod etc complete all as specified and directed

S & F in repair brass chromium plated shower rose with arms with or without swivel joint, 125mm size including fixing to iron pipes complete all as specified and directed. (Make: CERA Cat No F7020304CH or equivalent of Parryware /Hindware/Prayag)

S&F in repair sinks with drainage board made of stainless steel sheet 1.0 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmx203mm bowl size 405mm x 354mmx203mm (Make: Prayag Cat No 1239D or equivalent of Parryware /Hindware/Cera)

S&F in repair 0.71mm thick plain aluminium alloy sheet 31000 H4 in stepped flashing all as directed.

S & F in repair 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed.

S & F 25 mm bore, gun metal gate valve, with iron wheel head, screwed both ends, screwed for iron pipe or for brass ferrule complete all as specified and directed.

M&L for Disconnecting existing PVC tanks of any position or at any hight of any description,capacity exc 250 ltr to 500 ltr, setting aside for cleaning (lowering if required) for repair, cleaning and removing all scale and dirt/dust from existing PVC tank and hoisting, reconnecting and refixing in position including inlet-outlet pipe at opening portion and at mouth etc complete all as specified and directed

M&L for Disconnecting existing PVC tanks of any position or at any hight of any description, capacity exc 500 ltr to 1000 ltr, setting aside for cleaning (lowering if required) for repair, cleaning and removing all scale and dirt/dust from existing PVC tank and hoisting, reconnecting and refixing in position including inlet-outlet pipe at opening portion and at mouth etc complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple/tank adoptor suitable for HDPE water tank complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple/tank adoptor suitable for HDPE water tank complete all as specified and directed.

M & L for rewriting or repainting of existing letters or figures (Block, Roman, Italic or Indian) not exc 30 cm high with synthetic enamel paint complete all as specified and directed by Eng-in-charge.

M & L for removing plant/Uprooting of vegetation growth including roots on wall/roof/parapet/chajja/beam/near pipes etc and applying acid treatment after removing roots for preventing regrowth and making good disturbed surfaces/area in superficial area exc 150sq.cm but n.exc 400 sq.cm and averaging depth not exceeding 10 cm filling holes etc by using PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) or 10mm thick plastering in cement mortar 1:3 as required and finishing the surfaces to match with the existing surface complete all as specified and directed.

docileworx

Sangam Construction