Overhauling along with the operation and maintenance of TRT-6190020 for a period of five years in Western Railway

A-Operation, Maintenance, Guarding and cook for TRT-6190020

B-Maintenance of TRT machine.

Conveyor gear box drive shaft to HTT part no 0-1203241-0-07 Dimension Ø 2" or its equivalent /as per drawing /Sample Above/

Conveyor drive shaft 2" dia (long) to HTT part no 0-1203241-0-10 Dimension 5 feet long or its equivalent /as per drawing/Sample Above/

Conveyor drive shaft 2" dia for 1" pitch sprocket (short) to HTT part no 0-1203241-0- 09 Dimension 2 feet long or its equivalent /as per drawing/Sample Above/

NT-2 Conveyor drive shaft to HTT part no 0-1203241-0-34 Dimension Ø 2" X 92- 1/4" or its equivalent /as per drawing /Sample Above/

NT-3 Conveyor drive shaft to HTT part no0-1203241-0-34 Dimension Ø 2" X 92- 1/4" or its equivalent /as per drawing/Sample Above/

HTT part no 0-1306509-0-01 Duplex pitch & teeth 1", 13 teeth or its equivalent /as per drawing Above/

HTT part no 0-1306509-0-02 Duplex pitch & teeth 1", 26 teeth or its equivalent /as per drawing /Sample Above/

3"pitch to HTT part no 0-2300223-0- 01 Simplex pitch & teeth 3", 8 teeth or its equivalent /as per drawing Above/

HTT part no 0-2300224-0-02 Simplex pitch & teeth 4", 8 teeth or its equivalent /as per drawing /Sample Above/

Simplex Roller Chain 1" pitch ANSI- 80/BS228/ISO6061328.68 or its equivalent /as per drawing /Sample Above/

Half Link 1" pitch ANSI- 80/BS228/ISO60682.6 or its equivalent /as per drawing /Sample Above/

Duplex Roller Chain 1" pitch ANSIB 29.1/ ISO606/DIN 81882657.36 or its equivalent /as per drawing /Sample Above/

Half Link 1" pitch for Duplex ANSIB 29.1/ ISO606/DIN 8188153.4 or its equivalent /as per drawing /Sample Above/

NEW TIE CONVEYOR PAD to HTT part no 0-2300202-01-01 or its equivalent /as per drawing /Sample / RDSO Above/

Tie brake pad to HTT part no B0021 Y01 or its equivalent /as per drawing /Sample Above/

Castor Wheel to HTT part no 0- 3653000-0-01 or its equivalent /as per drawing /Sample Above/

Steel Rollers in leu of castor wheel or its equivalent /as per drawing/Sample Above/

Flanged bearing to SKF F2B-SCED- 112or to FYH UCFL-209-28E or Dodge Above/

F4B-SCMED-300or to SKF,IKO, MCGILL DODGE, FYH ( Bolt Hole 23.8mm against 18mm Above/

Jaw open /cIose Cylinder 0-3371001-0-04 to HTT Part No or its equivalent to dimension Piston Size in Inches 3 Piston Rod size 1. 1/2"Stroke Above/

Clamp 6/7 raise / lower Cylinder 0- 3371013-0-03 to HTT Part No or its equivalent to dimension Piston Size in Inches 2.1/2 Piston Rod size 1.1/2Stroke28' Above/

Working unit front R/L Cylinder 0- 3371015-0-03 to HTT Part No or its equivalent to dimension Piston Size in Inches 4 Piston Rod size 2 Stroke 30 Above/

Balance beam Cylinder 0-3371021-0-02 to HTT Part No or its equivalent to dimension Piston Size in Inches 4 Piston Rod size 1.1/2 Stroke 4 Above/

Rail puller/Frnt plow tilt Cylinder 0- 3371026-0-03 to HTT Part No or its equivalent to dimensionPiston Size in Inches3Piston Rod size1.1/2 Stroke14 Above/

Jaw up/Down Cylinder 0-3371032-0-02 to HTT Part No or its equivalent to dimension Piston Size in Inches Rod size 3 Stroke Above/

Sled lock Cylinder 0-3371036-0-02 to HTT Part No or its equivalent to dimension Piston Size in Inches2.1/2 Piston Rod size 1.1/2 Stroke 12 Above/

Clamp 2/8 Cylinder 0-3371037-0-03 to HTT Part No or its equivalent to dimension Piston Size in Inches 4 Piston Rod size 2 Stroke 5.1/2 Above/

Working unit rear Cylinder 0-3371045-0- 02 to HTT Part No or its equivalent to dimension Piston Size in Inches 5 Piston Rod size 2Stroke 34.1/2 Above/

Clamp 6/4 Cylinder 0-3371068-0-01 to HTT Part No or its equivalent to dimension Piston Size in Inches 2. 1/2 Piston Rod size 1.1/2 Stroke 28 Above/

Frnt plow sus Cylinder B2341XAA to HTT Part No or its equivalent to dimension Piston Size in Inches 4 Piston Rod size 1.1/2 Stroke 8.15/16 Above/

Sus. Lockout Cylinder A9422XAB to HTT Part No or Its equivalent to dimension Piston Size in Inches 5 Piston Rod size 4 Stroke 2 Above/

Clamp 7/8 Cylinder B5703XAB to HTT Part No or its equivalent to dimension Piston Size in Inches 2.1/2 Piston Rod size1.1/2 Stroke 10 Above/

Clamp 3/4 Cylinder B5703XAA to HTT Part No or its equivalent to dimension Piston Size in Inches 2, 1/2 Piston Rod size 1.1/2 Stroke 14 Above/

Traction pump ctrl Cylinder 0-3371047-0- 01 to HTT Part No or its equivalent to dimension Piston Size in Inches 2 Piston Rod size 0.625 Stroke 15 Above/

Sled storage lift Cylinder A0688XAG to HTT Part No or its equivalent to dimension Piston Size in Inches 2 Piston Rod size1.1/4 Stroke 19.3/4 Above/

Sled steering Cylinder 0-33710026-0-13 to HTT Part No or its equivalent to dimension Piston Size in Inches 3 Piston Rod size 1.1/2 Stroke 10 Above/

1" Pin of Various Size ranges from 2 to 6" Above/

1 1/2" Pin of Various Size ranges from 2" to 6 Above/

70 mm pin of Various Size ranges from 2" to 6" Above/

Rocker Bearing to SKF Part No GE 25 ZO or Its equivallent as per annexure -II (IKO COVERED IN RLY ANNX - ll & FAG NOT COVERED) Above/

Rocker Bearing to SKF Part No GE38 ZO or its equivalent as per annexure -II (IKO COVERED IN RLY ANNX - ll & FAG NOT COVERED) Above/

Cost of washer & split pin Above/ 1005501.1

HATZ Engine 1D81Z Above/

HYD.RETURN FILTER Above/

Brake shoe to part, no 0-3677005-0-01 or its equivalent Above/

A5045Y01 to part no Brake Relay Above/

WEAR STRIP VERTICAL (Friction Block) to HTT part No 0-1404722-0-01 Above/

WEAR STRIP LATERAL (Friction Strip) to HTT part No 0-1302484-0-01 Above/

16 mm Dia, IWRC, 6 strands, 6x36 construction, 27 to 49 wires per strand, 11000 mm (11Meter) long with one 3 end free and another end crimped with Machined Choker Ferrule Above/

Turn buckle to HTT Part no 0-3600000-0-01 Above/

U clamp (I6mm clip with nut) to HTT part No 0-3600001-0-01 Above/

push pull cable 8500mm (100M432 8500t to Gantry engine Above/

push pull cable 7000mm (100M432-7000) to traction pump Above/

push pull cable 8000mm (100M432-8000) to traction pump Above/

Rope pulley to HTT part No 0-1301941 0 Above/

Pin for pulley assy to HTT part No: 0- 2302850-0-01 to HTT part No 0-2302850- 0-01 Above/

Pin for pulley assy to HTT part No: 691328-198 to HTT part No Y691328-198 Above/

Pin for pulley assy to HTT part No: 0- 2302850-0-02 to HTT part No 0-2302850- 0-02 Above/

Pin for pulley assy to HTT part No: 0- 2302850-0-03 to HTT part No 0-2302850- 0-03 Above/

Pin for pulley assy to HTT part No: 0- 2302850-0-04 to HTT part No 0-2302850- 0-04 Above/

Flanged Bearing UCF210-D115 to HTT part No UCF210-D115 Above/

Drive Shaft as Per Drawing / Sample Dia 52mm length 600 mm to Suit HTT part No: B7948Y0I to HTT part No Above/

Drive Shaft as Per Drawing / Sample Dia 5 mm length 600 mm to Suit HTT part No: B7947Y01 to HTT part No Above/

Axle pin for Gantry toothed Wheel Dia 50mm length 130mm As per drawing to HTT part No Above/

Axle pin for Gantry internediate wheel Wheel Dia 25 mm length 130 mm As per drawing to HTT part No Above/

Hub for Gantry Cardon Shaft as per drawing to HTT part No Above/

Roller horizontal for clamp No 2 & 8 to HTT part No: 0-1300219-0-01 Above/

Roller (vertical) for clamp No. 2 & 8 to HTT part No: 0-1400475-0-01 Above/

Roller stepped for clamp No 3 & 7 to HTT part No: A9374Y02 Above/

Roller horizontal for clamp No 4 & 6 to HTT part No: 0-1200189-0-01 Above/

Roller vertical for clamp No. 4 & 6 to HTT part No: A9371Y02 Above/

Roller rail holding for clamp No 4 & 6 to HTT part No: A9373Y01 Above/

Shaft horizontal roller for clamp No 2 & 8 to HTT part No: A0973T41 Above/

Shaft horizontal for clamp No 4 & 6 Above/

Shaft vertical for clamp No 4 & 6 Above/

Shaft for clamp No 3 & 7 Above/

Shaft for Horizontal rail holding roller for clamp No 4 & 6 to HTT part No: A9376Y01 Above/

Shaft for Vertical rail holding roller for clamp No 4 & 6 to HTT part No. A9375X01 Above/

Collar for rail threading rollers Above/

Nut stepped for rail guide rollers vertical Above/

Nut for horizontal roller shaft of clamp No 4 & 6 Above/

Washer thrust for rail guide rollers Above/

Shield for vertical roller for clamp 4 & 6 Above/

Shield for Horizontal roller for clamp 4 & 6 and 7 Above/

"Deep Groove Ball Bearing to part no 6206 2 RS Make of HMT,SKF,FAG, KOYO,NTN,TIMKEN" Above/

Deep Groove Ball Bearing to part no 6212 2RS Make of HNT,SKF,FAG, KOYO,NTN,TIMKEN Above/

Tapered roller bearing to part no 32009XA Make of HMT,SKF,FAG, KOYO,NTN,TIMKEN Above/

Tapered roller bearing to part no 4T 392/394A Make of HMT,SKF,FAG, KOYO,NTN,TIMKEN Above/

Thrust Bearing to part no GX 30 F Make HMT,SKF,FAG, KOYO,NTN,TIMKEN Above/

Self lubricating Bush to part no 16DU16 Make of HMT,SKF, FAG,KOYO,NTN,TIMKEN IKO, MCGILL Above/

Self lubricating Bush to part no 7050DU Make of HMT,SKF,FAG,KOYO,NTN,TIMKEN IKO, MCGILL Above/

Tappered Bore Bearing Torque Arm Plate to part no BT2832L flake of RBC Above/

Double Row Spherical Self-Aligning Roller Bearing to part no 22310 E Make of HMT,SKF,FAG, KOYO,NTN,TIMKEN Above/

Double Row Spherical Self-Aligning Roller Bearing to part no 21305 E1 Make of HMT,SKF,FAG, KOYO,NTN,TIMKEN Above/

Spherical Roller Bearings to part no 22209 Make of HMT,SKF, FAG, KOYO,NTN,TIMKEN Above/

Deep Groove Ball Bearing to part no 6210- 2Rs Blake of HMT,SKF,FAG, KOYO, NTN,TIMKEN Above/

Gantry cardon shaft to HTT part no 52787V or its equivalent Above/

DRIVE SHAFT internediate to HTT part no 0-3521007-0- 04 (similar item length 800mm) or its equivalent Above/

Shaft 4 pad to 2 pad drive shaft to HTT part no 0- 3521004-0-10 (1000 mm) or its equivalent Above/

Drive Shaft For COTA Gear Box to HTT part no 0- 3521006-0-03/885 mm long or its equivalent Above/

Havells 63 Amp MCB Above/

Havells 50 Amp MCB Above/

Havells 32 Amp MCB Above/

Havells 16 Amp MCB Above/

Havells 6 Amp MCB Above/

11 PIN RELAY SOCKET Relco Brand to part no D0650Y09 Above/

PLUG-IN RELAY SOCKET Time Cube ON to part no D0650Y17 Above/

PLUG-IN RELAY SOCKET Time Cube OFF Above/

8 PIN RELAY BASE (siemens or releco) Above/

Heavy-Duty Limit Switch (make Allen Bradley) 802T-AP to part no L422907 Above/

Honey well heavy duty LSA2B with LAZ51b Above/

Horn 12 voIt Above/

Horn 24 volt Above/

Horn 24 volt Pneumatic Above/

30 W LED Working light 24 V Above/

12 V LED Working light Above/

Flasher light 12 voIt LED Above/

Flasher light 24 volt LED Above/

Engine hourmeter 12 voIt Above/

Engine hour meter 24 volt to part no 501151 Above/

Danger light 24 volt Tail Lamp Above/

Yellow/Marker light 12 volt Tail Lamp LED Above/

ELEMENT NO CONTACT Above/

ELEMENT NC CONTACT Above/

CONTACT BLOCK NO/ NC Above/

Push button NO-NO SEIMENS MAKE to part no 3SB5400-0B Above/

Starter / ignition switch (RC Rate) to part no L424256 Above/

Push button with contacts different colors as per requirement Above/

switch 2 way Above/

Switch Spring return 2way Above/

switch 3 way Above/

Switch Spring return 3way Above/

3 Position Key Switch Above/

cable tie 6" Above/

cable tie 8" Above/

cable tie 12" Above/

thymbole 2.5mm Above/

thymbole 1.5mm Above/

insulation Tape Above/

T.B connectors 4mm Above/

End Plate 4mm Above/

B steel channel Above/

2 core *1.5 sq mm cable ( LAPP or Harsco) 43 Above/

4 core*1.5 sq mm cable ( LAPP or Harsco) Above/

3 core *2.5 sq mm cable ( LAPP or Harsco) Above/

70 mm cable ( LAPP or Harsco) Above/

10 core cable 10" 1.5 sqmm ( LAPP Harsco) "' Above/

18 core cable 18*1.5 sqmm ( LAPP Harsco) Above/

6 Square mm Cable ( LAPP or Harsco) Above/

Supply of Wireless Remote Control Electronic Siren/Hooter System Specification: 150 Operating range 300 Mtr., supply votage-12V/24V (DC). Each set consists of following parts: Amplifier out power 40 watt, RMS/50 watt, RMS Max, Frequency response- 150 Hz to 1O Khz. Power supply: 12V/24V (DC)-02 nos. Microphone input channel 01 no. Auxiliary channel. Speaker-Horn type. Power 25 watt RMS/38watt flax Resistance 08 OHM Frequency Response 250Hz to 10Khz=02 nos.. Remote unit operating range: 300Mt. = 01 No. Antenna range 300 Mt. = 02 nos. Make: Amplifier and Speaker:-Ahuja or Equivalent. Above/

24 V Fan DC Above/

12 V Fan DC Above/

TUBE LIGHT 24 V 20W Above/

NO 32 LP Hydraulic Hose to specification SAE 100 R4 or equivalent with maximum operating pressure of 100 PSI/7bar and hose ID of 2.0" (Aeroequip specification 2661-32) Above/

NO 32 LP Hydraulic Hose to specification SAE 100 R1AT or equivalent with maximum operating pressure of 600 PSI/41 bar and hose ID of 2.0" (Aeroequip specification GH663-32) Above/

No 24 LP Hydraulic Hose to specification SAE 100 R4 or equivalent with maximum operating pressure of 150 PSI/10,5 bar and 3 hose ID of 1.5" (Aeroequip specification 2661-24) Above/

NO 20 LP Hydraulic Hose to specification SAE 100 R1AT or equivalent with maximum operating pressure of 1000 PSI/69 bar and hose ID of 1.25" equivalent to GH663-20 Above/

No.16 HP Hydraulic Hose to specification 2755-16 or equivalent with maximum operating pressure of 4640 PSI/320bar and hose ID of 1" equivalent to (AEROEQUIP SPECIFICATION 2755-4SP) Above/

No 12 HP hose to specification exceeding 2755-12 or equivalent with maximum operating pressure 5500 psi/380 bar ID of hose 0.75" (Aeroequip specification 2755- 4SP) Above/

No.10 HP hydraulic hose exceeding specification 2755- 10 or equivalent with a maximum operating pressure of 6100 PSI/7 420 bar and hose ID of 0.63" equivalent aeroquip specification 2755- 4SP Above/

No.8 HP hydraulic hose exceeding specification SAE 100 R2AT or equivalent with maximum operating pressure of 4300 PSI/295 bar and hose ID of 0.5 "( Aeroequip specification 2781-8)or GH195- 8 Above/

No.6 HP hydraulic hose exceeding specification SAE 100 R2AT or equivalent with maximum operating pressure of 5000 PSI/350 bar and hose ID of 0,38" (Aeroequip specification GH195-6) Above/

No.4 HP hydraulic hose exceeding specification SAE 100 R2AT or equivalent with maximum operating pressure of 5800 PSI/400 bar and hose of ID 25" (Aeroquip Specifications GH195-4) Above/

Straight End Fitting 37 degree JIC FSN to suit 32 LP hose, Above/

End fitting 60 degree BSP FSN to suit 32 LP hose Above/

Straight End Fitting 37 degree JIC FSN to suit 24LP hose, Above/

End fitting 60 degree BSP FSN to suit 20 LP hose Above/

Straight End Fitting 37 degree JIC FSN to suit 16HP hose, Above/

End fitting 60 degree BSP FSN to suit 16HP hose Above/

Straight End Fitting 37 degree JIC FSN to suit 12HP hose, Above/

End fitting 60 degree BSP FSN to suit 12 HP hose Above/

Straight End Fitting 37 degree JIC FSN to suit 10HP hose, Above/

Straight End Fitting 37 degree JIC FSN to suit 8HP hose, Above/

End fitting 60 degree BSP FSN to suit 8 HP hose Above/

Straight End Fitting 37 degree JIC FSN to suit 6HP hose, Above/

End fitting 60 degree BSP FSN to suit 6 HP hose Above/

Straight End Fitting 37 degree JIC FSN to suit 4HP hose, Above/

End fitting 60 degree BSP FSN to suit 4 HP hose Above/

Crimping Charges per hose(both ends) Above/

Hose clamp to part no HRS 1 S10 AL M Above/

Hose clamp to part no HRS 1 S14 AL M Above/

Hose clamp to part no HRS 1 S18 AL M Above/

Hose clamp to part no HRS 2 S22 AL M Above/

Hose clamp to part no HRS 2 S28 AL M Above/

Hose clamp to part no HRS 3 S30 AL M Above/

Hose clamp to part no HRS 3 S38 AL M Above/

Hyd Valve for Traction 'ON/OFF' to HTT Part No A1215Y09 or its equivalent to 4WE Above/

Hyd Valve for Sled steering, Traction forward/reverse to HTT Part No 0- 33330 10-0- 05 or its equivalent to DSG03-3C2-D24-N1-50 Above/

Hyd Valve for Dead Mans valve to HTT Part No L421624 or its equivalent to DSG03- Above/

Hyd Valve for CHECK VALVE to HTT Part No C1600S or its equivalent to 1" NRV 20 Above/

Hyd Valve for CHECK VALVE to HTT Part No SV 30 GA 1- 4X or its equivalent Above/

Hyd Valve (DC valve) for jaw operation to HTT Part No C7588Y05 or its equivalent Above/

Hyd Valve DC valve for jaw operation to HTT Part No C7588Y04 or its equivalent Above/

Hyd Valve Husco valves to HTT Part No C7588Y01 or its equivallent Above/

Hyd Valve Husco valves to HTT Part No L425581 or its equivalent Above/

Hyd Valve For clamp #2, #8, sled lock to HTT Part No L424163 or its equivallent Above/

Hyd Valve For clamp #5 to HTT Part No L424162 or its equivalent Above/

Hyd Valve For rail lifter, damp #3, #4, #6, #7 to HTT Part No L426165 or its equivallent Above/

Hyd Valve for Shut off valve to HTT Part No 0-3330011- 0-03 or its equivalent Above/

estimated 128 X 4=512 @ Rs 36.5 per piece , How ever size will vary and contractor has to supply as per requirement Above/

Hy. Pr. gauge 0-600 PSI to HTT part No 0- 3307004-0-07 or its equivalent Above/

Hy. Pr. gauge 0-160 PSI to HTT part No 0- 3307004-0-02 or its equivallent Above/

Hy. Pr. gauge 0-5000 PSI to HTT part No 0-3307004-0-01 or its equivalent Above/

2-pad pump drive gear box for gantry/ Pump drive assembly for Gantry 0- 3524005- 0-10 Harsco or Funk 28102 its equivalent as in Annexure -II Above/

2-pad pump drive gear box for main machine/Hyd Pump Drive to Harsco 0- 3524003- 0-02, FUNK/ C2826XXPXX or its equivallent as in Annexure-II Above/ 1436439.3

4-pad pump drive gear box for main machine/ Pump Drive to 0- 3524018-0-01 Harsco or FUNK/ C594PXXPXXC or its equivallent as in Annexure-II Above/ 2940482.4

Gear box planetary HMD to Harsco 0- 3523006-0-03 or FUNK/F9RTor its equivallent as in Annexure-II Above/

Traction motor to Harsco Part No 0- 3321014-0-05or to mode Model 74318 DFZ Eaton/ Harsco or its equivalent as in Annexure -II Above/

Main M/C Oil cooler motor to Harsco Part No 0-3321020-0-01or to model CASAPPA make Above/

NT1, NT2, NT3 Motor to Harsco Part No 0-3324001-0- 01 or to model PARKER / CASAPPA make Above/

Gantry Traction to Harsco Part No TY768773-0-05 (HTT), or to model Model 90 M075SAUER Sundstrand,/Harsco or its equivalent as in Annexure-II Above/

Gantry oil cooler motor to Harsco Part No 5P16 9 (Phooltas), 0- 3321020-0-01 (HTT)or to model Model No PARKER / CASAPPA make Above/ 1483077.1

Traction Pump to Harsco Part No D4346Y22or to mode AA10VG45HW1/10- R- NSC60F043D 1 SET OF PUMP Consists of Two Pumps Clubbed, HTT part No is for One Rexroth/ Harsco or its equivalent Above/

Low Pressure system to Harsco Part No A0846Y03or to mode PVH 098 L 02A130A- 130000AG10(02-346388), Make: Vickers/ Harsco or its equivallent Above/

Oil cooler MOTOR to Harsco Part No 0-3311011-0- 06 or to model 25VQH 17A 11C 20 LH VELJAN make Above/

Gantry Traction pump to Harsco Part No. TY769018-0- 05or to model Sauer Danfoss Part No. 90L075-CB-5 Above/

Gantry Working pump to Harsco Part No 0- 3312006-0- 37 or to mode 2520 VQ-21A- 14-11CB-20 LH VELJAN MAKE Above/

Replacement of guide channel of NT-I and NT-2 Conveyor: Work involve- Dismantling of old U guide channel, Grinding & cutting the surface for proper size, fabrication of new U channel (30x30x85 mm and 6 mm 2 thickness) approx. 27 m long, welding of new guide channel on machine frame including all contractor men & material complete. Above/

Fabrication of threader unit shaft and necessary repairing of bracket Work Involve- Dismantling of threader unit LHS and RHS bracket, dismantling of shaft from bracket then manufacturing of shaft approx size 51 mm dia and 636 mm long 02 nos, as per sample, fitting of 02 nos, in LHS and RHS threader unit bracket, fixing of bracket on frame, repairing of both side cylinder holding brackets with pin as per sample, inc luding all contractor men & material complete. Above/

Replacement of all adjuster screw with block of gantry driving chain. Work Involve- 220 Dismantling old adjuster screw with block size 100x100x8 mm, 8 nos, and 40x80x8mm, 8 nos, of gantry no. 1&2, grinding of surface, drilling of 12 mm dia hole with thread, total 4 nos hole for each adjusting bracket, fabricating of adjuster screw with block then providing on machine with bolt. Manufacturing of new 8 pin 50 mm dia 130 mm long and 30 mm dia 130 mm long, as per sample. induding all contractor men & material complete. Above/

Plough Reconditioning Work dully cutting and realligning the same as per Design & Tusk Reconditioning Electrde Cost: 17000+ Gas 5000+ Transportation to & fro from site to workshop and Bent relieving 8000 Above/

Radiator and Hyd cooler cleaning and Pressure Testing Above/

Replacement of accumulator Bladder and refilling Above/

Mounting Pad for Engine Above/ 1261077.7

Complete Re- wiring of Main Machine and Gantry Duly removing old parts & fixing of new cable & Panel boxes where ever required & fixing of lights & fans where ever required Above/

Painting following recommended procedure as per RDSO recommendation And Refurbishing of Machine & cabin Refurbishing and numbering, lettering etc (this incudes repairing of Doors and windows & Rubber beeding) Above/

Painting following recommended procedure as per RDSO recommendation And Refurbishing of Gantries - Two Nos and numbering, lettering etc 1 Job = 2 Gantries Above/

Re conditioning of Fixing holes for pins of Cylinders and other components (welding & Grinding if necessary replace brackets) Above/

Welding Electrodes for reconditioning other than projected For attending Cracks or strengthening at Joints Above/ 2914382.2

Charges for Complete POH Dismantling Cleaning inspection & Re-assembling as per POH Schedule includes materials supplied by railways beyond projected as per instruction by Machine in-charge. Above/

Commissioning of Machine on completion of IOH at Site Above/

Crane hiring charges for cranes up to 15 MT capacity as per the site requirement. Rates are based on per hour charge 2800/-

1."Disassembly of existing old pick-up conveyor assembly with chain, sprockets etc. from the TRT, including the support members." 2. "Removal of existing hydraulic connections for cylinders and control valves including electrical sensors and cables connected with old sleeper pick 1 up system." 3. "Removal of old pickup system drum assembly and conveyor drop arrangement present in the TRT" 4. "Manufacture of new old sleeper pickup unit with jaw assembly and small conveyor system attached to main conveyor for old sleeper" 5. Suitable drive chains, sprockets and drive system for jaw assembly pick up linked to small conveyor forms part of supply 6. "Installation of the entire assembly on the TRT suitably reinforcing the arrangement to withstand the load." 7. "Provision of new cylinders to match with the old sleeper pickup arrangement" 8. "Electrical and hydraulic connections for the existing system along with control panel and suitable valves." 9. Changing, rerouting pneumatic connections.

D-Supply and installation of Indirect braking systems

Supply and installation of Indirect braking systems