Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹15.6 L+₹43,676 (2.89%)Rejected-Finance SHOP NO 259 LOHOGAON ROAD KALWAD KHANDVE NAGAR PUNE 411032 | PUNE | MAHARASHTRA | 411032 | L2 | Rejected-Finance High Rate | |
| 3 | L3₹16.2 L+₹1.0 L (6.79%)Rejected-Finance | L3 | Rejected-Finance High Rate | |
| 4 | L4₹16.7 L+₹1.5 L (10.2%)Rejected-Finance FLAT NO 06 BLDG NO B 2 PLEASANT PARK WANWADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L4 | Rejected-Finance High Rate | |
| 5 | L5₹16.8 L+₹1.7 L (10.9%)Rejected-Finance | L5 | Rejected-Finance High Rate |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
30 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8439 REPAIR / REPLACEMENT / MAINT OF LT ELECTRICAL DISTRIBUTION SYSTEM AND OTHER CONNECTED ITEMS AT AFMC AND ALLIED AREA UNDER GE (CENTRAL) PUNE
2023_MES_624205_2
8439 REPAIR/ REPLACEMENT/ MAINT OF LT ELECTRICAL D
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹40,000
Yes
20 Feb 2024
6 Dec 2023
1 Jan 2024
6 Dec 2023
30 Dec 2023
18 Dec 2023
Amount
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 Mtr in depth for laying of LT UG cable in soft / loose soil and getting out complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soil all as specified & directed.
Removing excavated material (Soil) to a distance Not exc 50 Mtr and depositing where as directed at level not exceeding 1.5 Mtr above the starting point all as specified & directed.
M & L for Reinforced concrete pipes class NP-2 of size 150mm bore dia in 1 RM each half round (for bottom and top ) all as directed. Note :- Two half round pipe (Bottom and top) will be measured asone RM.
M & L 50mm bore dia light grade galvanized pipe with all fitting ISI marked, laid in trenches / under floor or fixing on wall / pole / crossing nallah etc complete all as specified and as directed .
M & L 80mm bore dia light grade galvanized pipe with all fitting ISI marked, laid in trenches / under floor or fixing on wall / pole / crossing nallah etc complete all as specified and as directed .
Cutting of road/hard standing and making good with PCC (1:2:4) type B 1 using 20mm graded stone aggregate fair finished surface all as specified and as directed complete all as specified.
Supply, laying, testing and commissionig of LT cables 1100 Volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cable including all jointing / connecting acessories as required laid in trenches / ducts / under plinth floors / passing through pipes etc/ fixed on wall of size 10 Sqmm 2.0 Core including taking out old existing worn out cable complete all as specified & directed.
All as per item No. 8 above but of size 16 Sqmm 4.0 Core
All as per item No. 9 above but of size 25 Sqmm 4.0 Core
All as per item No. 9 above but of size 35 Sqmm 4.0 Core
All as per item No. 9 above but of size 50 Sqmm 3.5 Core
All as per item No. 9 above but of size 70 Sqmm 3.5 Core
All as per item No. 9 above but of size 95 Sqmm 3.5 Core
All as per item No. 9 above but of size 120 Sqmm 3.5 Core
All as per item No. 9 above but of size 185 Sqmm 3.5 Core
All as per item No. 9 above but of size 240 Sqmm 3.5 Core
M & L for MCCB 63/100 Amps, 16 KA, TP, 415 Volts with adjustable thermal and fixed magnetic setting with cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts, bolts including taking down the old u/s MCCB complete all as specified & directed.
M & L for MCCB 125 Amps, 25 KA, TP, 415 Volts with adjustable thermal and fixed magnetic setting with cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts, bolts including taking down the old u/s MCCB complete all as specified & directed.
M & L for MCCB 200 Amps, 25 KA, TP, 415 Volts with adjustable thermal and adjustable magnetic setting with cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts, bolts including taking down the old u/s MCCB complete all as specified & directed.
M & L for MCCB 160 Amps, 25 KA, TPN, 415 Volts with adjustable thermal and fixed magnetic setting with cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts, bolts including taking down the old u/s MCCB complete all as specified & directed.
M & L for MCCB 250 Amps, 25 KA, TPN, 415 Volts with adjustable thermal and adjustable magnetic setting with cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts, bolts including taking down the old u/s MCCB complete all as specified & directed.
M & L for MCCB 400 Amps, 36KA, TPN, 415 Volts with adjustable overload and adjustable shortcircuit with cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts,bolts including taking down the old u/s MCCB complete all as specified & directed.
M & L for MCCB 630 Amps, 50KA, TPN 415 Volts with adjustable overload and adjustable shortcircuit with cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts, bolts including taking down the old u/s MCCB complete all as specified & directed.
Supply, installing, testing and commissioning factory made and tested (CPRI certified) LT Panel indoor type suitable for 415 Volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated aluminium bus bars of rating 1200 Amps installed on porcelain insulators. The panel shall be dust and vermin proof IP-65 class protection and made of 3.15mm CRCA MS sheet and 40 x 40 x 6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front & back side opening type, with apron for cable entry with single door shutter and locking arrangement all including PCC and earth work etc including taking down old us panel complete all as specified & directed and comprising of the following :-
(a) Incoming :- ACB 4 Pole, 415 Volts, 50 KA Manual drawout type with microprocessor release of capacity 630 Amps.
(b) Outgoing
(i) MCCB TPN 400 Amps, 36 KA - 02 Nos
(ii) MCCB TPN 350 Amps, 25 KA - 02 Nos
(iii) MCCB TPN 250 Amps, 25 KA - 08 Nos
(iv) MCCB TPN 160 Amps, 25 KA- 02 Nos
(vii) Indicator lamps Red / Yellow / Blue - 03 Nos
Material and labour for servicing and repairing LT distribution panel installed at various substation including dismantling incomming & outgoing cable connections from feeders / switch gears. S & F heat shrinkable cable sleeves and insulation taping properly on cable including replacement of cable end terminals (lugs) of appropriate size, replacement of u/s Nut,bolts, washers etc replacing unserviceable indicator lamp R Y B repairing to panel wiring including Panel door repair, replacement of door hinges, locking system etc, Reconnecting all elect connections, earthing connections checking throughly and made all feeders serviceable as directed.
S & F in repairs Indicator lamps Red / Yellow / Blue (Set of Three) complete all as specified & directed.
M & L preparing old painted surfaces by scraping and removing old paints, rust etc. from LT Panel / feeder pillar and painting with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.
M & L in replacement for cable jointing kit for 1.1 KV grade cable for outdoor, heat shrink type joint complete with jointing material and all accessories suitable for 4/3.5 Core XLPE, armoured, Aluminium conductor cable complete all as specified & directedof following sizes :-
(a) 25 to 50 Sqmm
(b) 70 to 120 Sqmm
(c) 150 to 185 Sqmm
(d) 240 to 300 Sqmm
M & L in replacement earthing for sub station equipments (Transformer, lightning arrestor and feeder pillar box) complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6.3mm thick buried directly in ground vertically (in earth pit not less than 2.25 Mtr below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 Mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides and including GI earth strip 32 x 6mm bolted (with GI Nuts, Bolts & Check Nuts) and riveted to earth plate electrode at one end and connected to metallic bodies of equipments etc at the other, earth strip encased in and including 40mm bore GI medium grade pipe with all fittings from top of electrode to body of equipment fixed with and including 40 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work , etc complete all as specified and shown in electrical plate No 3 of SSR Part-I.
Note : (i) Refilling of the earth pit shall be carried out with black cotton soil. (ii) GI strip 32 x 6mm & GI protection pipe upto 7.5 Mtr length will be measured under this item.
Testing and fault locating of LT underground cable with the help of cable fault locating machine at site including excavation & earth work within the area of faulty cable all as directed by Engineer-in-Charge. (Note :- The machine for locating of fault will be arranged by the contractor .The quoted rate is deemed to be included for the fault locating machine & necessary excavation , earthwork etc.)
Rama Electricals
PURVA ELECTRICALS AND ENGINEERS
Chaulya Enterprises
N D ELECTRICAL
Akanksha Enterprises
SHREE ATHARVARATHI ELECTRICALS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .