Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹25.0 L+₹5,028.50 (0.20%)Rejected-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-Finance HIGHER RATE | |
| 3 | L3₹36.8 L+₹11.9 L (47.7%)Rejected-Finance | L3 | Rejected-Finance HIGHER RATE | |
| 4 | L4₹38.7 L+₹13.8 L (55.3%)Rejected-Finance WZ 143 A 7A S 4 43 GALI NO 2 OLD MAHAVIR NAGAR NEW DELHI 110018 | WEST DELHI | DELHI | 110018 | L4 | Rejected-Finance HIGHER RATE | |
| 5 | L5₹41.7 L+₹16.8 L (67.4%)Rejected-Finance III 6 7 2ND FLOOR ABOVE BANK OF BARODA GOPINATH BAZAR DELHI CANTT 110 010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L5 | Rejected-Finance HIGHER RATE |
| Sl No | Description | Qty | Unit | M/S GR construction compony L1 | M/S ANIL KUMAR L2 | MB Enterprises L5 | JIWAN DASS THAREJA AND SONS L6 | M/S Sunil Steel Works L4 | R.P Builders L3 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for Washing, rubbing down and stopping of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. | 3,000 | Sqm | 30 ₹90,000 Lowest | 30 ₹90,000 Lowest | 60 ₹1,80,000 | 69 ₹2,07,000 | 58 ₹1,74,000 | 35 ₹1,05,000 |
| 2.00 | M&L for Washing, rubbing down and stopping of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed. | 800 | Sqm | 30 ₹24,000 Lowest | 30 ₹24,000 Lowest | 60 ₹48,000 | 70 ₹56,000 | 58 ₹46,400 | 40 ₹32,000 |
| 3.00 | M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of alkali-resistant primer paint and 1.5mm thick wall care putty complete all as specified and directed. | 2,000 | Sqm | 50 ₹1,00,000 | 34 ₹68,000 Lowest | 62 ₹1,24,000 | 68 ₹1,36,000 | 68 ₹1,36,000 | 40 ₹80,000 |
| 4.00 | M&L for complete removal of existing treatment and applying 1mm thick wall care putty to achived smooth surface and then applying two coats of oil bound distemper over a coat of chalk whitening as priming coat after preparation of ceiling surfaces complete all as specified and directed. | 1,500 | Sqm | 60 ₹90,000 | 42 ₹63,000 Lowest | 85 ₹1,27,500 | 95 ₹1,42,500 | 68 ₹1,02,000 | 55 ₹82,500 |
| 5.00 | M&L for preparation of old surface and apply one coat Plastic emulsion paint (ready mix 1st quality) having of approved manufacturer, complete all as specified and directed. | 148 | Sqm | 50 ₹7,400 | 42 ₹6,216 Lowest | 68 ₹10,064 | 75 ₹11,100 | 78 ₹11,544 | 110 ₹16,280 |
| 6.00 | M&L for complete removal of existing treatment and applying texture paint as per design and shape and size shall be as directed by engr-in charge with 1st quality of glossy or matte plastic emulsion paint over a coat of base paint over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. | 50 | Sqm | 600 ₹30,000 | 200 ₹10,000 | 230 ₹11,500 | 240 ₹12,000 | 300 ₹15,000 | 150 ₹7,500 Lowest |
| 7.00 | M&L for applying one coat of white wash on old decorated ceiling surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed. | 3,000 | Sqm | 7 ₹21,000 | 3 ₹9,000 Lowest | 12 ₹36,000 | 15 ₹45,000 | 12 ₹36,000 | 15 ₹45,000 |
| 8.00 | M&L for applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed. | 7,500 | Sqm | 20 ₹1,50,000 Lowest | 25 ₹1,87,500 | 40 ₹3,00,000 | 45 ₹3,37,500 | 46 ₹3,45,000 | 40 ₹3,00,000 |
| 9.00 | M&L for preparation of old surfaces of walls by completet removal of existing and after preparation of surfaces applying primer and further applying two coat of cement base paint complete all as specified and directed. | 3,000 | Sqm | 35 ₹1,05,000 | 30 ₹90,000 Lowest | 45 ₹1,35,000 | 52 ₹1,56,000 | 52 ₹1,56,000 | 45 ₹1,35,000 |
| 10.00 | M&L for complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. | 2,100 | Sqm | 65 ₹1,36,500 | 54 ₹1,13,400 Lowest | 120 ₹2,52,000 | 132 ₹2,77,200 | 118 ₹2,47,800 | 100 ₹2,10,000 |
Tender Value
Refer Docs
EMD Value
₹82,000
Closing Date
2 Aug 2025, 6:00 pmClosed
GE NEW DELHI
GE NEW DELHI, SP MARG NAR ABHM GATE NO 5
PERIODICAL SERVICES TO CERTAIN BLDG AND WELCOME MAINT, ATT, ROOF TREATMENT AND OTHER CONNECTED MISC WORKS AT IHQ OF MOD TPT COY ASC UNDER GE NEW DELHI
2025_MES_720102_1
NIT No GE/ND-38/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE NEW DELHI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE NEW DELHI
₹82,000
Yes
14 Oct 2025
12 Jul 2025
4 Aug 2025
12 Jul 2025
2 Aug 2025
26 Jul 2025
Amount
M&L for Washing, rubbing down and stopping of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.
M&L for Washing, rubbing down and stopping of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of alkali-resistant primer paint and 1.5mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment and applying 1mm thick wall care putty to achived smooth surface and then applying two coats of oil bound distemper over a coat of chalk whitening as priming coat after preparation of ceiling surfaces complete all as specified and directed.
M&L for preparation of old surface and apply one coat Plastic emulsion paint (ready mix 1st quality) having of approved manufacturer, complete all as specified and directed.
M&L for complete removal of existing treatment and applying texture paint as per design and shape and size shall be as directed by engr-in charge with 1st quality of glossy or matte plastic emulsion paint over a coat of base paint over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed.
M&L for applying one coat of white wash on old decorated ceiling surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed.
M&L for applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed.
M&L for preparation of old surfaces of walls by completet removal of existing and after preparation of surfaces applying primer and further applying two coat of cement base paint complete all as specified and directed.
M&L for complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
M&L for Washing, rubbing down and stopping of old surface and applying one coat of acrylic Smooth exterior paint of required shade complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on conc/ brick surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. Note: WPC will be measured and paid saparately
M&L for 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
Supply only liquid water proofing compound as per manufacture instruction complete all as specified and directed.
M&L for Preparation of new plastered surface and applying one & more coat of white putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over tow coat of distemper oil emulsion complete all as specified and directed.
M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed.
M&L for prepapation of new plaster serface of walls and applying two coats of acrylic emultion weather coat paint over a coat of primer over 1mm thick cement base wall care putty complete all as specified and directed.
M&L for uprooting plants (girth n.exc 15 cm of trunk to any of plants grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surface and pouring acid not less than 100ml for each plant in the roof to avoid further growth complete all as specified and directed. Note: Work has to be executed in multi storey bldgs upto 25 Meter height
Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed.
Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster including cleaning the surface thourghly and removing the demolition material out side the MOD land complete all as specified and directed.
M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling coarse over RCC slab to bring the desired slope up to five stories of Bldg, using water proofing compound as per manufacturer instruction complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.
M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints over 10mm thick plaster in cement mortar 1:4 complete all as specified and directed. Make: Ms Sika India Limited/ Ms IWL India Limited/ Ms Torchtar Membranes & Bitumen Products Pvt Ltd/ Ms Asian Paints
M&L for PCC Roof /Terrace Tiles (300 mm x 300 mm x 20 mm) laid on 15 mm thick cement moter in 1:4 and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface complete all as specified and directed.
Demolition of cement concrete of any description and in any position including removing the demolition material out side the MOD land complete all as specified and directed.
M&L for PCC 1:3:6,type C-1 (using 20mm graded aggregate) as in water tank platform mixed with water proofing compound as per manufacture instruction as in roof floors complete all as specified and directed. Note: water proofing compound to be measured separately
M&L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engg in charge.
Disconnecting existing tanks setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
S&F in repair 500 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed.
S&F in repair 1000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed.
S&F in repair 2000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed.
S&F in repair European vitretious china wash down water closet pan (excluding flushing cistern but including flush pipe and pvc sheet cover white) complete all as specified and directed. MAKE:- CERA, JAGUAR, HINDWARE
S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. MAKE:- CERA, JAGUAR,HINDWARE
S&F in repairs white Plastic water closet seat cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair Vitreous china squatting pan of orissa pattern size (580 x 440mm) white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed. MAKE:- CERA, HINDWARE, PARRYWARE
S&F in repair Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
S&F in repair Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed.
S&F in repair Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
S&F in repair vitreous china Urinal, half stall type, white (excluding flushing cistern , flush pipe and waste pipe) complete all as specified and directed.
S&F in repairs 15mm bore Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. MAKE:- CERA, JAGUAR,HINDWARE
S&F in repair Health faucet Chromium plated brass with 1.50 m long flexible pipe for WC complete all as specified and directed. MAKE:- CERA, JAGUAR,HINDWARE
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repairs 32 mm PVC waste pipe 900 mm long with complete all as specified and directed.
S&F in repair 15 mm dia bib tap cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. MAKE:- CERA, JAGUAR,HINDWARE
S&F in repairs 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. MAKE:- CERA, JAGUAR,HINDWARE
S&F in repairs 15 mm dia stop valve cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. MAKE:- CERA, JAGUAR,HINDWARE
S&F in repairs 15mm dia angle valve, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions, complete all as specified and directed. MAKE:- CERA, JAGUAR,HINDWARE
S&F in repairs 15 mm dia wall mixer cost copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. MAKE:- CERA, JAGUAR,HINDWARE
S&F in repairr Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed.
S&F in repair 15mm bore GI tubing, medium grade, with all fittings and fixed including taking down old tubing and connections, complete to walls, ceiling or laid in floor complete all as specified and directed.
All as per item No 57.00 above but 20mm bore tubing complete all as specified and directed.
S&F in repair 100mm long aluminium butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F in repair 125mm long aluminum anodised handle complete all as specified and directed.
S&F in repair 150mm long aluminium anodised tower bolt complete all as specified and directed.
S&F in repair stainless steel butt hinges 100mm long medium weight etc complete all as specified and directed.
S&F in repair 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair aluminum anodised handle 150 mm long cast type complete all as specified and directed.
S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, oncrete or brick surrounds, or aluminium glazed with putty or fixed with beads complete all as specified and directed.
M&L for Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
M&L for Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC / wooden beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F in repair stainless steel curtain rod 25 mm dia with wood finished,pair of suitable brackets,fennals and also making good the wall surface to match the existing surfaces complete all as specified and directed.
S&F in repair Toughened glass, 5.5mm thick, bathroom corner shelf of size 300mm with stainless steel railing and stainless steel fasteners fixed on wall complete all as specified and directed. Note :- The rates for these items deemed to be included for cleaning of complete house such as floor (includes application of pouncha with wet cloths), removing of all spots on door, window and wall and floor tile in kitchen and bath room after distempering/ painting, cleaning of glass paes for door & windows including garges shutters & its shutter proper and over cover the furniture properly during OBD & painting of tarpoline cover paints in different room and lay out of all furniture items proplerly after completion of entire process complete all as specified and directed by Engineer In Charge. Note: (a) Srl Item No 1.00 to 15.00, 17.00 to 19.00, 21.00, 23.00, 27.00, 29.00, 30.00, 32.00, 33.00, 35.00 to 40.00, 46.00, 47.00 & 50.00 to 55.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.
M/S ANIL KUMAR (BID ID -3380147)
R.P Builders (BID ID -3380963)
M/S Sunil Steel Works (BID ID -3380737)
MB Enterprises (BID ID -3380930)
JIWAN DASS THAREJA AND SONS (BID ID -3381001)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .