NIT No. 70/UPGP/2025-26 Sl No. 03/07

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multi layer-2000 litre Capacity.

Earth work in excavation for foundation trenches in all sorts of soil including removing spreading of staking the spoils within a lead of 75m as directed including trimming the side of trenches leveling, dressing and ramming the button, bailing a) Depth of excavation not exceeding 1.50 m

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and fitting joints with powdered earth or local sand.

(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) (B) With N.B. Variety stone metal.

Ordinary cement concrete ( mix 1:1.5:3) with graded stone chips (20mm down excluding shuttering and reinforcement,if any in ground floor. As per relevent I.S. Codes.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering Foundation

Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete. (a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre (i) First 50 metre

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (iv) 100 mm dia

Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (iv) 100 mm dia

Washing and developing TUBE well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with "V" notch including hire and labour charges for all tools and plants and scaffolding as required

Reinfocement for reinforced concrete work in all sorts of strutures including distribution bars stirrups. Binders etc. including supply of roads intial straightening and removal of lose rust (if necessary), cutting to requisite lengh hooking and bending to concrete shape, placing in proper position and binding with 16 gague black annealed wire an inter-section complete as per drawing and direction (b) Extra foe works beyound the roof of ground floor/intial 4.0m (i) upto 4th floor roof in each addi Floor SAIL/TATA @ 1.5 %

Supply, delivery & installation of 1000 watt peak capacity Solar Photovoltaic aray panels along with 1 H.p. capacity Solar Photovoltaic AC Submerssable pump set (designed to use with Solar Power) in the New/exisiting bore-well / Tube Well of Approved brand having discharge capacity not less than 1000 Ltrs /hour at 40 mtrs. head including supply of all necessary materials viz .required dia. column pipes etc. as specified of approved quality , lobour etc. with all allied works as per dirction of site in charge/Engineer

Pump Controller Unit (PCU) Supplying, fixing, commissioning and testing pump controller unit consisting with PCU Switching elements MOSFET Type of Charger PWM with MPPT technology Input from PV 800V max to 370V DC, 1 to 1.5HP, single Phase with protection Short circuit, Deep discharge, Input surge Voltage, over current, Battery reverse Polarity, Solar array reverse polarity Dielectric strength1.1 KV between input/output and ground with EMI protections removed. Cooling Forced with temperature sensitive fan operation Ambient temperature 50 degree Celsius (Max) Operating Humidity 95% maximum Assembly/Mounting as per normal industrial practice Finish Epoxy Power Costing' Cable Entry from rear, preferably 200 mm above ground level all system parameters shall be displayed System parameters LCD display such as battery voltage, output (load) voltage, load current etc (Amrut Energy/Exide) make

Installation of pump riser pipes, connecting rods, brass cylinder etc if required including supplying the required quantity spare parts of approved quality and fitting the same in position by engaging expert tube well mechanic & helper with necessary tools & plants after lowering of Solar Photovoltaic submersible pump set.

Solar Iron Purifire Machine The Water Purifier Machine remove the iron and other impurities from the water and also kills bacteria through a UV lamp. The enter power comes from solar energy and there is no battary storage. The solar energy is stored in the form of pure water which will be adequate for two days of backup.

M.S structural works with hollow sections (square or rectangular shape) ccntorming to IS 806-1968 & IS 1161-1998) connected to one another with bracket. gusset, cleat as per design, drawing& direction oft Engineer-in-Charge complete inciuding cuting to requisite sliape & size. fabrication includung metal arc welding conforming to IS. 816-1969 &IS 9595 using electrodes of approved make and brand contorming to IS 814- 2004, haulage, hoistng and erecton all complete The rale includes the cost of all MS Hollow section, al consumabies such as electrodes gas and hire charges of all tools and plants and labour reqired tor execution and all ncidental chages (such as electricty, labour insrance) etc. complete Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS| code in finished wor. Payment for gusset. bracket, cleat may be made by addingthe actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 .2nd flcor levei from the grcund. Add 15 % extra over the rate for each additional floor or 4m beyond the initial 8 m or part thereof

Suppiying. titting and fixing PVC pipes of approved make of Schadule 80 imediumm duty) contorming to ASTMD 1785 and threaded to mateh wtn GI Ppes as per 1S 1239 (Pant 1). witn il necossary accessories specials VI2 SOcket bend. tee union, ross, elibo, nipple longscrew educng sOcket. reducing tee. sthort piece etc itted with holder bats| clamps, including cutüing pipes. makung threads fitung. fixing etc.| COI'1plete n ai respect including cost of all necessury titings as tequired jonting materials and twO Cvats of paint1rng with approved paint| in any position albove ground iPayment will be made on the centre line measirements of total pipe ine ncluding9 all specials. No separate oayient will be mase for accesOties. specals Payment for painting will be (made Seperately a) For Exposed Worh PVC Pipes

Supply ,fiting & fixing bib cock or stock cock

Sign Board

Supply of well ring at site including loading ,unloading & carrying etc. (750mm dia & 0.30 m height )

Supply of well ring cover at site including loading,unloading & carrying etc. (750mm dia each cover)