Loading…
Loading…
Tender Value
₹31.6 Cr
EMD Value
₹31.6 L
Closing Date
9 Jul 2026, 9:30 pmClosed
Bengaluru West City Corporation
Anusha A M
Comprehensive Development of buildings and Improvements to Road Infrastructure works and other developments works in Govindarajanagara Division for the year 2026-27 (Package-GRN-1) Annexure-3 Action Plan No. 79, 80, 82, 83 and Annexure-7 Action Plan No. 6, 16, 17, 19, 20)
BWCC/2026-27/OW/WORK_INDENT530
BWCC/2026-27/OW/WORK_INDENT530
Open
Other Works
Two Tender Document System(Two Cover)
BWCC Govindarajanagar Division
5 documents required · 5 mandatory
As per KW-4 tender document clause no: A General 3.2
As per KW-4 tender document clause no: A General 3.2(b, c), 3.3 (a) & 3.6
As per KW-4 tender document clause no: A General 3.2(a) & 3.3 (b)
₹7,500
₹31.6 L
1 Jul 2026
1 Jul 2026
10 Jul 2026
4 Jul 2026
4 Jul 2026
Comprehensive Development of buildings and Improvements to Road Infrastructure works and other developments works in Govindarajanagara Division for the year 2026-27 (Package-GRN-1) Annexure-3 Action Plan No. 79, 80, 82, 83 and Annexure-7 Action Plan No. 6, 16, 17, 19, 20)
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, ...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)( VOL-II,P.No-9, I.No.5.4-SRB-2023-24)-Issue Rate Date-08.10.2025
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ...
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pa...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including ounding off corner...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including ounding off corner...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including ounding off corner...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including ounding off corner...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement m...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings wit...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the dire...
Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete...
Providing Matti & Nandi wood frames of doors, windows, clarestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete...
Providing Matti & Nandi wood frames of doors, windows, clarestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per ...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per ...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per ...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-inc...
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 (P.No.119, I.No.13.15, Vol-2,SR 2023-24)
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete-Size: 15 cm x 10 cm
Providing and fixing 100 mm sand cast Iron grating for gully trap) ( P.No.136, I.No.14.29 of Vol-2 SRB-2023-24)
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks up to 0.4 mm ...
Providing waterproof treatment to Raft Slab using 2 coats of acrylic co polymer elastomeric Acrylic co-polymer elastomeric sealer & protector. The surface shall be prepared free of tar, dust, fungus, ...
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade ...
Dismantling chain link fencing including removing the posts, cement concrete fedestals, foundation and stacking the useful materials safely at a distance to the appropriate disposal area as per direc...
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...
Supplying and fixing new Mangalore tiles on existing reepers
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Providing Mangalore Ridge tiles set in C.M. 1:2 and pointed with C.M.1:2
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped...
Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with fittings, accessories and flush pipe). (Vol-II ,P.No-A-22, I.No-343, SR-2023-24)
S.C.I. gully or nahani grating 100 mm dia ( Page No -A-34, Item No-735 of Vol-2 SRB-2023-24)
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for
kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of appr...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structura...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (Pg.No-117, Item No-13.2.2 of Vol-...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) 20mm pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) 25mm pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge the rate includes m...
13.4-Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :50 mm nominal bore (Vol-II ,P.No-117, I.No-13.4.4, SRB-2023-24)
Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length, 20 mm nominal bore (Vol-II ,P.No-118, I.No-13.8.2.2, SRB-2023-24)
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge..(Vol-II ...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe 32 mm dia(Vol-II ,P.No-136, I.No-14.28.2.1 SRB-2023-24)
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Pg.No-135, Item No-14.7.1 SR-2023-24)
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge( Vol-II P.No-187 I.No-19.2.1 SR 2023-24...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 ...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.( Vol-II P.No-189 I.No-19.27.1 S...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ...
Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel,...
Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel,...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as pe...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever requir...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all col...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of dry lean cement concrete Sub- base over aprepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rati...
Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per d...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant)
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant)
Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 18 m3) upto 20km.
Cost of Haulage Excluding Loading and Unloading. Case-1 : Surfaced Road. Taking output 18 t load and lead 10 km = 180 t.km. Considering Haulage for 20km. (First Floor)
Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20mm, covere...
By Mechanical means Dismantling Brick / Tile work / rubble masonry / pitching / etc by
mechanical means
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Construction of Granular Sub-Base of required grading(iv) as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader ...
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...
Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joint...
Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour,tamping, plugging leakage points and all other ancillary operations complete.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. (First Floor)
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (First Floor)
Providing and fixing PVC (S.W.R) S Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. (First Floor)
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cist...
Dewatering the sewage / storm water by using reqired HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump. 20 hp pump.
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes (RAIN WATER) conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect lin...
Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with e...
Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia. (First Floor)
Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium (First Floor)
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium (First Floor)
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium (First Floor)
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing Towel rail 600mm length with hooks made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class. Premium. (First Floor)
Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories - Class Premium (First Floor)
Installation charges for split type airconditioner with allied works for one indoor and oneout door unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. SR 2023 -...
Supplying & fixing relay for over load protection for window and split air conditioners. SR 2023 -24 Item No 6.17 Page No 32
Supplying and commisioning of AC Remote. 2023 -24 Item No 6.33 Page No 33
Supplying & Drawing UTP- CAT 6E-LAN Cable. CAT 6E Group- A. (page,36 Item, No: 8.1 Of Ele SR 2023-2024)
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on ...
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 ampers ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or rackets with bolts and nutsand a 5 amps, ceiling rose with...
Supply, installation of 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Disch...
Supplying heavy gauge PVCconduit pipe.dia.25.mm thick confirming to IS 2509 with suitable size bends, junction boxes,adhesivepasteetc,and fixing using inverted wood plugs in case of RCC ceiling and RC...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, s...
Supplying following size heavy guage PVC conduit pipe and following thick confirming to IS 2509 with suitable size bends, Metal/PVCjunction boxes, adhesive paste etc, and running before concreting the...
Supplying heavy gauge PVC conduit pipe......mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal / PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Supplying following size heavy guage PVC conduit pipe and following thick confirming to IS 2509 with suitable size bends, Metal/PVCjunction boxes, adhesive paste etc, and running before concreting the...
Supplying heavy gauge pvc conduit pipe ...dia...mm thick with suitable size bends, metal Junction boxes adhesive paste etc..,by groove cutting in the wall and fixing by bracing U & J hooks and Cement...
Supplying heavy gauge pvc conduit pipe ...dia...mm thick with suitable size bends, metal Junction boxes adhesive paste etc..,by groove cutting in the wall and fixing by bracing U & J hooks and Cement...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. SR 2023 -24, Item No 1.4.7 Pa...
Supplying and fixing PVC/metal conduit Deep junction box. (SR 2023 -24, Item No 1.5.2 Page No.3). 25 mm deep Junction box
Extra for Groove cutting in brickwall/Ccfloor to the suitable depth for concealing of Conduit/Gipipe and plastering,finishing upto wall surface complete.upto 50 mm conduit in brick wall. SR 2023 -24...
Extra for Groove cutting in brickwall/Ccfloor to the suitable depth for concealing of Conduit/Gipipe and plastering,finishing upto wall surface complete.upto 50 mm conduit in CC Floor. ( SR 2023 -24,...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends,junction box,elbows,screwsatan interval of 300 mm as required. (SR 2023 -24, Item No 1.8.2 ...
Supplying PVC flexible conduit pipe....mm dia fixing on surface over inverted tapered wooden plug or phillplugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NFscre...
Supplying & fixing retrofittype-PL-LED Lamp......WLED linear source with CCT 6500 degree K,CRI lees than70%.efficacyless than 80 lumenper W, life less than 25000 burning hours and Compliance to IS103...
Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI less than 80. Power Input: 220-240V @ ...
Supplying of recess mounting non integrated type LED down light......W luminaire comprising of pressured e cast / extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power / CO...
Supplying of recess mounting non integrated type LED down light......W luminaire comprising of pressured e cast / extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power / CO...
Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has...
Supply of round / square recess / surface mounted rolling type LED Downlight with......W GU10 LED Lamp Rib Fabricated from die cast aluminium with white powder coated pre wired to mains connector & ha...
Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500...
Supplying of recess mounting non integral type 2x2 LED 40-42 w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 deg...
GI/Copper strips for grounding connections, using necessary fixing materials as required. Item no 12.58.11 - P No 54 Ele SR 2023-2024 600 x 600 x 3 mm Copper plate
GI/Copper strips for grounding connections, using necessary fixing materials as required. Item no 12.58.2 - P No 54 Ele SR 2023-2024. GI/Copper strips. 25 x 3 mm GI strip
GI/Copper strips for grounding connections, using necessary fixing materials as required. Item no 12.58.3 - P No 54 Ele SR 2023-2024 25 x 6 mm GI strip
2mm thick perforated cable Gitray with on existing Msangle support using necessary GI bolts/nuts and washer or welding as required. Page no-55, Item no-12.59.2 Ele SR 2023-2024. 300 x 50 mm
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Fixing all types and allcapacities fluorescent / false ceiling/spotIight/ LED fittings indoor on the wall/ ceiling/rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of ...
Supplying and wiring adopting loop system in existing PVC Conduit / casing caping using 1100V grade, copper conductor flecxible multistrand FRLS PVC insulated, 2x.1.5Sqmm cable confirming to the GTP ...
b) Medium point above 3.0M upto 6.0M from tapping point to outlet via switch box
c) Long point above 6.0M upto 10.0M from tapping point to outlet via switch box
d) Two outlet in a row, above 3.0M upto 6.0M from tapping point to outlet via switch box
e) Three outlet in a row, above 6.0M upto 10.0M from tapping point to outlet via switch box
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multisand Copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-6...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multisand Copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-6...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multisand Copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-6...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multisand Copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-6...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multisand Copper with low conductor resistance single core wire in open or consealed system of wiring with specified IS-6...
Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board. Item no 3.14.6- P No 10 Ele SR 2023-2024. 6A Pendant Holder
Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board.( Item no 3.14.8- P No 10 Ele SR 2023-2024) 6A Bell Push
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall-a)...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall . ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall (I...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall (I...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall (I...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall (I...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall (I...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 ( Item no3-3.6.1-P No 9 Ele SR 2023-2024) Group 'A' Material a) 6Amps one W...
Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293-6/16Amps universal socket
Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293-TV/Telephone socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Page no-9,Item no-3.6.12 Ele SR 2023-2024. RJ45/I.O Outlet Cat-6
Supplying and fixing of modular switch& connected accessories on existing modular switch plate as per IS 3854 and IS 1293.( Item no3-3.6.2-P No 9 Ele SR 2023-2024) b) 6Amps Two way switch
Supplying and fixing of modular switch/& connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Item no 3.6.3-P No 9 Ele SR 2023-2024.) c) 6Amps 3way socket
Supplying and fixing of modular switch& connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(Item no 3-3.6.4-P No 9 Ele SR 2023-2024) d) Steeped fan Regulator two modul...
Supplying and fixing of modular switch& connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Item no 3.6.7 -P No 9 Ele SR 2023-2024. e) 16Amps one way switch
Supplying and fixing of modular switch/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293-6Amps Bell push
Supplying and fixing of modular switch& connected accessories on existing modular switch plate as per IS 3854 and IS 1293. item no 3-3.6.9-P No 9 Ele SR 2023-2024.f) 32 A DP switch
Supplying & fixing miniature circuit breaker s on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross 3 with Short circuit breaking cap...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross 3 with Short circuit breaking capa...
Supplying and fixing miniature circuit breakers on existing MCB distribution boa15rds using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall/ood board/ flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3p...
Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps,bolts,nutsetc.,with provision for fixing suitable type capacity MCB's single phase/3phase/s...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. Item no 5.20.10 - P No 18 Ele SR 2023-2024.63 A 4 pole
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 2 pole
Fabricating supplying and mounting MS box made out.... SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...
Supplying of 1440rpm heavy duty eahust fan with bracket blades suitable for operate on 230V 50Hz, AC Supply complete.
Supplying capacitor type 48" sweep ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. single phase AC supply confirminf to ISS-374-1979 and with ...
Supplying wall mounting fan suitable to operate at single-phase230v AC. supply. Item no 6.5.2 - P No 30 Ele SR 2023-2024.400 mm Sweep
Supplying......TR split Air conditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capaci...
Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor c...
Supplying & Fixing of ... ms Cat 6 Patch Cable. (page,37 Item, No:8.11.1 Of Ele SR 2023-2024). 1 mtr
Supplying and drawing PVC Flexible one pair telephone unarmoured tinned copper cable -2 Pair . page,36 Item, No: 8.2.2 Of Ele SR 2023-2024. 2 Pair
Supplying & Fixing of switch mounting rack with powermanager & Cable manager. 9U with 450mm depth. (page,36 Item, No: 8.4.3 Of Ele SR 2023-2024)
Supplying fixing of Network Switches. (page,36 Item, No: 8.9.5 Of Ele SR 2023-2024). 24 port 10/100 Switch
Supplying & Fixing of switch mounting rack with power manager & Cable manager. (page,36 Item, No: 8.9.6 Of Ele SR 2023-2024). 16 port 10/100 Switch
Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 2023 -24, Item No. 9.5.7, Page No 39
Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...
Supplying and installation of approved wooden floor for indoor hall with 10mm thick interlock Herringbone Wooden Laminated Flooring over Firm Foam pad inclusive of HOM, labour, etc. as per the directi...
False Ceiling: Providing and fixing plain Gypsum Board of size 1200x2400x10mm for false ceiling at all heights including fixing of Aluminium frame work made of special sections as per the drawing & de...
Supplying and installation of approved wooden floor for indoor hall with 10mm thick Regular Wooden Laminated Flooring over Firm Foam pad inclusive of HOM, labour, etc. as per the directions of enginee...
Supplying and installation of approved MDF Corner Beeding of Shade Oatmeal inclusive of HOM, labour, etc. as per the directions of engineer-in-charge. (First Floor)
Supplying and installation of approved MDF T & R Profile Beeding of Shade matching inclusive of HOM, labour, etc. as per the directions of engineer-in-charge. (First Floor)
Providing and fixing Plain/Textured Laminate on 12mm ply wood over Aluminum strips of 50mmx50mm (Aluminium cost to be qouted separately), complete including cost and conveyance of all materials, labou...
Providing and fixing Plain/Textured Laminate fixed on 4mm Thick MDF Board & 12mm ply wood over Aluminum strips of 50mmx50mm (Aluminium cost to be qouted separately) of approved brand, complete includi...
Providing and fixing Fluted panel fixed on 12mm ply wood over Aluminum strips of 50mmx50mm (Aluminium cost to be qouted separately) of approved brand, complete including cost and conveyance of all mat...
Providing and fixing Toughened glass partitions for offices and commercial spaces typically feature 10 to 12 mm thick tempered glass (conforming to EN 12150) to ensure high safety and durability from ...
Modular toilet cubicles require High Pressure Laminate (HPL) or compact boards (12mm 18mm thickness), stainless steel/ nylon hardware, and adjustable pilasters. standard cubicle measures approximately...
Supplying and fixing Health Faucet, with 8mm dia, 1.00 m long flexible tube and wall hook with N.R.V (Back flow preventer) of jaguar make allied seiries ALD 577 including necessary, screws, accessorie...
Cabin Table: Table top is made up of 25mm thick PLPB with matching edge banding of approved color. Understructure is made up of 18mm thick modesty and gable end is considered, Stirage: Made up of 18mm...
CONFERENCE TABLE: Table top is made up of 25mm thick PLPB with matching edge banding of approved color. Understructure is made up of 18mm thick modesty and gable end is considered, 2 Nos POP up box co...
Supply of 3 drawer pedestal of size 400 mm (W) x 450 mm (D) x 670 mm(H) :- Unit made out of 18 mm thick PLPB, all exposed edges finished with 2 mm thick PVC edgebanding, drawers lock & other necessary...
CABIN TABLE: Table top is made up of 25mm thick PLPB with matching edge banding of approved color. Understructure is made up of 18mm thick modesty and gable end is considered, Storage: Made up of 18mm...
CABIN TABLE: Table top is made up of 25mm thick PLPB with matching edge banding of approved color. Understructure is made up of 18mm thick modesty and gable end is considered, Storage: Made up of 18mm...
Pantry or working area tables: Table top is made up of 18mm thick MR Plywood with lamminate and matching edge banding of approved color. Understructure is made up of 18mm thick modesty and gable end i...
Supplying of good quality Executive High Back Mesh Optium Chair of approved make with Head Rest with Height adjustable Handle. (First Floor)
Supplying of good quality Executive MB Nylon Base of approved make with Head Rest with height adjustable Handle. (First Floor)
Supplying of good quality ALPHA MB Nylon Base M05 Center Tilt Mech Arms Fxd of approved make with height adjustable Handle. (First Floor)
Supplying of good quality ALPHA MB Nylon Base Visitor chairs of approved make. (First Floor)
Supplying and fixing BBMP Logo / Sign Boards as per drawing and specification, including cost of materials, labour, instalation etc., complete as per specifications. (First Floor)
Supply, fixing and installation of approved colour & design , Imported patterned wall paper on the partition wall or any recommended surface with base preparation including applying of oil base primer...
Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge
Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in char...
Supplying and fixing of Centre Table with Glass Top of suitable size. Including cost of materials, labour, instalation etc., complete as per specifications.
Supplying and fixing of small meeting table with metal frame and 12mm glass top Including cost of materials, labour, instalation etc., complete as per specifications.
Supplying and fixing of wooden 4 seater dining table with glass on top Including cost of materials, labour, instalation etc., complete as per specifications.
Diwan without storage: Providing and fixing diwan made up of (commercial) 19mm plywood for structure work and top finished with 2" thick cushion with 4" SS leg including cost of materials labour, inst...
Supplying of Bombay Dyeing Bed Spread, Pillows with cover of approved quality and design etc., The rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transp...
Back Unit: Providing and fixing storage unit and tables made up of (Commercial) 19mm plywood for structure work back will be of 6mm plywood with necessary supports & drawers. Drawers run by 20" hafele...
A3 Colour Laser Multifunctional Printer. Core Function: Print, Copy, Scan, Send and Optional Fax. Memory Standard 2.0 GB RAM, Paper Supply Capacity: Standard 1200 Sheets (100Sheets Multi-purpose tray,...
Providing A4 Laser-composite Printer, Printer Speed black (ISO A4) upto 20 ppm, Duty Cycle (monthly A4) upto 10000 pages, Print quality upto 1200x1200 dpi, PCL Print Language, 400 MHZ Processor Speed,...
A3 All-in-One Printing: Print, scan, copy, and fax up to A3 size for versatile business needs.
High-Speed A3 Printing: Print up to A3+ size with speeds of up to 25 ipm (black) and 12 ipm (colour) for ...
Providing Desktops with a X86 based processor Intel Core i5 / i7 (13 Gen) with up to 4.7 GHz Turbo frequency, 12 MB cache, 4 cores or higher / AMD Ryzen 5 7000 Series with up to 4.90 GHz Turbo frequen...
Supplying of 85" QD Mini LED TV with 4K Ultra HD resolution, AI-powered picture processing, built-in Google TV streaming, and high refresh rates. Panel Type: VA panel with wide viewing angles (up to 1...
Supplying and Fixing of 4MP Doom Camera ultra-HD video at \(2560 \times 1440\) pixels. Night Vision: IR (Infrared) for black-and-white up to 30 meters, or Smart Dual-Light for full-color night vision....
Supplying and Installation of NVR (8 Ch). Video Input/Output: Supports up to 8 IP cameras. Includes HDMI (up to 4K / 1080p) and VGA ports for simultaneous display. Connectivity: 1 RJ-45 (10/100/1000 ...
Supplying and Installation of HDD 2 TB for everyday backups, large file archives, and media libraries. The rate includes cost of all materials, labour charges with lead and lift, loading and unloading...
Supplying and Installation of POE Switch (8 Ch) the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidental charges etc.,...
Supplying and Installation of LED 2*2 Support Frame (for all Ceiling 2*2 Light) the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and a...
Supplying and Installation of LED Linear Hanging Profile Light the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidenta...
Supplying and Installation of Cat 6 Network I/O Port the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidental charges...
Supplying and Installation of Cat 6 Network I/O Dual Face Plate the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incident...
Supplying and Installation of I/O Back Box the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidental charges etc., comp...
Supplying and Installation of Fan Anchor Hook the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidental charges etc., c...
Supplying and Installation of BLDC Fan the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidental charges etc., complete...
Supplying and Installation of 8 inch Exhaust Fan the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidental charges etc....
Supplying and Installation of Battery Rack the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidental charges etc., comp...
Supplying and Installation of Pop Up Box the rate includes cost of all materials, labour charges with lead and lift, loading and unloading, transportation and all other incidental charges etc., comple...
Supplying, errection, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 15 KVA...
Providing supplying and fixing CLASSROOM BOARD CHALKBOARDSIZE:3600MM X 1200MM, MATERIAL: 8MM THK PARTICLE BOARD (WITH M.S. SHEET IN GREEN COLOUR AND WITH ALUMINIUM FRAME25 (INSPACE OFFICE FURNITURE @ ...
2MP Bullet Camera - Network IP Camera:
less than H.264 & MJPEG dual-stream encoding less than 1/2.8" 3Megapix...
CAMERA MOUNTING STAND
Media convertor
4 port poe switch
64 Channel NVR
Network video recoder:
less than Up to 8/16/32 channel with 1080p realtime live view
less than H.264/MJPEG dual code decoding
less than Up to 5Mp resolution
less than Max240fps@1080...
HARDDISK SEGATE 4 TB SURVENAVE Drive Bays Supported Sustained Transfer Rate OD 190MB/s Startup Current,Typical 12V,A 1.8, Load/Unload Cycles 300000
Splicing Enclosers
OFC Cable SC-SC
Data cable for all cameras
OPTICAL FIBER CABLE SINGLE MODE
1.2sqm 2core power cable
Bescom/BWSSB Deposit Charges
Supply and installation of Treadmill of Speed: 0.5 25km / h (0.3 15mi /h), AC3Hp (10.5Hp max) Power of the motor. Incline Rate : 0% 16%, Input power : 120V or 220V, 50Hz 60Hz Features : self trackin...
Supply and installation of Elliptical of Resistance Level: 20 Levels, Power Requirements : 120 volts, Set up height : 4, 10 Workout Programs :Manual, random, interval, custom interval, 10K Features : ...
Supply and installation of Bike H775 Technical specifications:- resistance level : 8 levels, no-friction magnetic resistance. Powe r:1.5 volts x2, aa size battery. Fly wheel : 5 kgs precision balanced...
Supply and installation of BH H772 Upright Bike : 130 x 62 x 142 cm Weight LED 64.6 kg / TV 67 kg Resistance system Electromagnetic brake Intensity 24 levels Power 250 w,Self generating LED Yes / ...
Supply and installation of Lexco Seated Chest Press : Product size: W1,437 L1,430 H1,940mm (56.6 " 56.3" 76.4 "),Weight: 282kg (622lb) ,block weight: 100kg (220lb) Material: involute pipe 50 X 105 3...
Supply and installation of lEG CURL /EXTN Specifications Demensions : 1,080 1,400 1,550 mm (42.5"x40.9"x61.0") Product Weight : 275kg (606lb) Stack Weight : 100kg (220lb) Features 2 kind of exercise...
Supply and installation of PECTORIAL Specifications Demensions : W1.280 x L1,010 X H1,950 mm (50.4"x39.8"x76.8") Product Weight : 297Kg (615lb) Stack Weight : 100kg (220lb) Features Independent moveme...
Supply and installation of LAT PULL Specifications Demensions : W1.095 x L1,615 X H2,242 mm (43.1"x63.6"x88.3") Product Weight : 255Kg (562lb) Stack Weight : 100kg (220lb) Features Height adjustable ...
Supply and installation of FUNCTIONAL TRAINER Specifications Demensions : W1.830 x L1,797 X H1,880 mm (72.0"x70.7"x74.0") Product Weight : 273Kg (602lb) Stack Weight : 100kg (220lb) Features Optimized...
Supply and installation of Olympic bench of specifications Demensions : W1,912 x L1,439 X H1,250 mm (75.3"x56.7"x49.2") Product Weight : 60Kg (132lb) Features 2 racking posiitons and 2 weight storage ...
Supply and installation ofMULTI CHAIR Specifications Demensions : 1,2451, 945 1,670 mm (49.0"x76.5"x65.7") Product Weight : 47kg (104lb) Features 19 steps height adjustable back rest for various t...
Supply and installation of FLAT DECLINED BENCH Specifications Demensions : W650 x L1,520 X H778 mm (25.6"x59.8"x30.6") Product Weight : 43Kg (95lb) Features Seat pad adjusts 13 locations, comfortable ...
Supply and installation of HYPER EXTENSION BENCH Specifications Demensions : W650 x L1,212 X H640 mm (25.6"x47.7"x25.2") Product Weight : 40Kg (88lb) Features Solid nonskid EP rubber pad handles and h...
Supply and installation of FLAT BENCH Specifications Demensions : W660 x L1,220 X H430 mm (26"x48"x16.9")Product Weight : 22Kg (49lb) Features Integrated 2 wheels for easy movement. Movement handle an...
Supply and installation of Olympic Bar 7ft:Olympic Barbells of 50mmDiameter, with 3 layer of Nickel Chrome finish , Gunmetal washers for extra durability & with knurling for better grip along two spr...
Supply and installation of Olympic Bar 5 feet:Olympic Barbells of 50mmDiameter, with 3 layer of Nickel Chrome finish , Gunmetal washers for extra durability & with knurling for better grip along two ...
Supply and installation of Olympic Bar 3feet:Olympic Barbells of 50mmDiameter, with 3 layer of Nickel Chrome finish , Gunmetal washers for extra durability & with knurling for better grip along two s...
Supply and installation of Olympic EZ Curl Bar 4 ft:Olympic Barbells of 50mmDiameter, with 3 layer of Nickel Chrome finish , Gunmetal washers for extra durability & with knurling for better grip alon...
Supply and installation of Olympic Plates -Olympic Rubberised Plates with 51mm diameter with top quality rubber coating for safety and Metal Ring for Durability. : 10kgs-8 nos,15 kgs 6 nos, 20kgs-4 no...
Supply and installation of Rubberised Hex Dumbells- Solid steel head, pressed and welded to a chrome handle with quality knurling for better grip.Rubber coating. Weight indicators permanently moulded ...
Supply and installation of Two Tier Dumbell Rack : Dumbells Rack , Two Tier Dumbell Storage rack , heavy duty made in steel 12 gauge pipes with 3 coates of Lycra. Inclusive of all taxes and Transporta...
Supply and installation of Olympic Plate Tree :Olympic Plate rack manufactured with heavy duty commercial grade steel with 2 lycra coating . Inclusive of all taxes and Transportation
Supply and installation of Olympic Bar Rack : Olympic Bar Holder: Commercial grade made with steel with 2 coats of Lycra finish 10 to 12 Bars capacity. Inclusive of all taxes and Transportation.
Supply and installation of Swiss ball - Quality, Safety, Durability Anti-Burst Gym Ball made with the highest quality PVC material available - Fitness balls anti-slip matte surface, anti-burst design ...
Supply and installation of Bosu Ball :Bosu Ball: Bosu Ball for Core strengthening and agility drills , Made as per International Bosu Standards. Inclusive of all taxes and Transportation.
Supply and installation of Medicine Ball-Anti burst Medicine Balls made with high quality rubber as er international Standards. set of 4 (1kg-2400,2kg-2700,3kg-3100,5kg-4300) Inclusive of all taxes a...
Supply and installation of Three Fold Excrcise Mats: Foldable Exercise mats made with high quality anti sweat absorbing resin . Inclusive of all taxes and Transportation.
Providing & constructing standard rubber flooring for indoor areas using rubber membrane 12 to 16 mm thick, to be layed over cement mortar using 1;6 beneath rubber membrane including cost of all mate...
Fabricating, providing and erecting in position Hot dip galvanised Gate. Using 72 X 72 X 4.8mm Sq. GI Pipe Frame with Top pipe bending in heavy duty hydraulic press with sand packing and hot bending t...
Providing and fixing pre cast solid cement concrete kerb stones made out of C.C. 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1...
Providing & Installation of PU Synthetic mat of 4mm thick on a base 6mm thick foam to absorve presure and with self leveling leyar and with beading on the sides of flooring including transportation sh...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and fixing precast reinforced cement concrete covering slab of 23cm thick made out of M25 with OPC cement @ 340Kgs/cum, with 20mm down size graded metal coarse aggregates @ 0.7cum and fine a...
Removing and refixing Drain cover slab (B S Slab and RCC Slab) and pointing in CM (1:3) as directed by the Engineer in Charge of the work (Excluding GST and Area Loading Charges)
Providing and laying in position Cement Concrete for all Foundation works. (M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) The granite/trap/basalt crushed graded coarse aggr...
Removing and resetting of precast kerb stones fixed with CM 1:3 fixed and finished in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) . (PWD Vol 3 SR 2023-24, Pg No ...
Providing and fixing precast reinforced cement concrete covering slab of 10cm thick made out of M25 with OPC cement @ 340Kgs/m3, with 20mm down size graded metal coarse aggregates @ 0.7m3 and fine agg...
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mx plant carriage of mixed Material...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface (PWD R&B Vol 3 SR 2023-24, Pg No 31, Item No. 5.4 (ii)).
Providing and laying Bituminous Macadam with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, tran...
Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...
Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and ...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work . (PWD Vol 3 SR 2023-24, Pg No 17, Item No. 3.1)
Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 18 m3) (PWD Vol 3 SR 2023-24, Pg No 5, Item No. 1.1 (d))
Cost of Haulage Excluding Loading and Unloading. Case-1 : Surfaced Road Taking output 18 t load and lead 10 km = 180 t.km (PWD Vol 3 SR 2023-24, Pg No 5, Item No. 1.4 (i) (b))
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NOTIFICATION.docx
Others - Notification • 0.43 MB
KW04 STD BWCC P1.doc
Tender Document • 2.29 MB
corrigendum.pdf
pdf • 1.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .