Provision of Internal and External Electrification and 1 No 20 Person Bed Cum Passenger G2 Lift to the Additional Building in Government Taluk Hospital at Bhuvanagiri in Cuddalore District

Amount

Wiring with 2x1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator)(5pts/coil)

Wiring with 2x1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point (6pts/coil)

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting

supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on with PVC unsheathed copper leads from terminals to the fitting.

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting ..

Supply and fixing of 1200 mm (48")AC ceiling fan complete with stepped electronic 300W regulator with 3.00 meter down rod with Fan clamp

supply and fixing of 300mm sweep wall mounting fan on existing plug.

Supply and fixing of AC DC 76mm Buzeer call bell suitable for 230 volts 50 c/s single phase AC supply on suitable thick borad wire push switch

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 5A 3pin and 2pin combined flush type wall socket with 5Aflush type switch concealed in suitable TW box in flush with wall and concealed with 3mm thick hylem sheet

Supply and fixing of 5A/15A 3pin combined flush type wall socket with 15A flush type switch concealed in suitable TW box in flush with wall and covered with 3mm thick hylem sheet

Supply and fixing of 3Nos. 5A (3pin and 2pin)combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply and fixing of 32A DP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. The DP MCB & Enclosure should be of Legrand/Hager make only

Supply and fixing of 32A FP MCB isolator in 4 pole sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. (Legrand/Hager make)

Supply and fixing of 8way single pole and neutral MCB sheet steel enclosure distributionboard with doubledoor (metal)1No.32ADPMCB as incoming and 6Nos.6A to 32A SPMCB outgoing inflush with wall and making good of th econcealed portion with earth connection only.The MCB DB and MCB's shouldbewith ISImark (likestandard make

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End

Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no.250A 4P MCCB switch as incoming and 5 nos.63A 3P MCB , 3 nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB Isolator switch as incoming and 3 Nos. 32A TP MCB and 3 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End. (DATA-8) (For Lift)&(Power SF)

Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 5 Nos 32A TP MCB and 3 nos.6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher end (FF)

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed position

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed position.

Supply and Run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 1/2 x 120 sq.mm. PVC LTUG armoured cable through 50 mm dia GI Pipe on post or on wall with MS clamps.

Supply and clarnping of 3 1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 31/2X 120 sq.mm PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of 3 1/2 x 120 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Design, Engineering, supply, fabrication. Erection, Testing commissioning and handing over of 1 No 20 Person Bed Cum passenger Lift (Gearless Lift without Machine Room) as per the following Technical Specification.1.Type of Lift : Bed cum Passenger Lift2. Capacity of Lift : 20 Persons/1360Kgs 3. Speed : 1.00 Meter/Sec 4. Type of Drive: specific Variable Voltage Variable Frequency V3F Drive with Enhanced ride comfort and levelling functions. 5. No. of Floors : 3 (Ground Floor +2 upper floor) 6. Total Travel : 6.6 m 7. Levelling Accuracy: High Level Accuracy with Smooth and jerk free stopping. 8. Construction of Car: 18 SWG High quality and suitable thickness S.S. car and false ceiling next hair line finish and mirror finish in rear panel . 9. Position of Machine: Directly above the Lift shaft. 10. No. of Landing Entrance : 3 (Ground +2) 11. No. of car Entrance: One in Front only. 12. Car Entrance Door: Power Operated V3F drive side Opening Sliding stainless steel scratch proof doors with hair line finish 13. Landing Entrance Door: Power Operated V3F driver Side Opening S.S Doors with provision for emergency key opening at all Landings. 14. Lift Well Existing: 2300 mm (width) X 3000 mm (depth).15. Lift Pit Depth required: 1600 mm 16. Car Size: 1300 mm (Width) X 2400 mm (Depth). 17. Car Clear Opening: 1200 mm 18. Power Supply: 400 / 440 V, 3 Phase, 50Cycles / Sec AC supply for power and 230V 50HZ single phase AC Supply for light at machine room with proper two 19. Control: Microcomputer (Microprocessor) based Simplex, Collective control with or without attendant. 20. Car Fittings: Compact Fluorescent Lighting with 2 Nos. 300 mm Sweep Cabin Fan. 21. Lift Well: R.C.C Construction with Brick Masonry(Existing ). 22. Indication: UP/DOWN Digital Direction and position indicator for all landing and inside the car. 23. Emergency Alarm Bell: Battery Operated alarm bell with Automatic Charging Device. 24. Emergency Light: Battery operated Light with Automatic Charging Device.

25. Fire Man’s Switch: to be permited Ground Floor. 26. Scaffolding: Minor Building Work Included. 27. M.S. Sill angels and facis Plates: Included 28. Steel for Lift Machinery: Included 29. Servicing and maintenance: Free comprehensive servicing and maintenance during the guarantee period of one year by the contractor .30. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of Power Failure. This shall consists of suitable type of Battery system with charger, invertor, under Voltage Protection system etc., Complete with all Accessories should be done by the contractor .31. Provision of Intercom with phone: Included32. Lift Licence: Preparation of Drawing, payment of Charges to CEIG / Lift inspectorate and insurance policies if any and obtaining CEIG safety certificate as per Lift Act.33. Floor Annunciator with music: Included. 34. SPECIAL FEATURE:A.) Infra-Red colour Sensor with full Height Screen.B.) Stainless steel signal fixtures. C.) Vandal Proof Button with S.S Cover.D.) S.S door frames for landing doors.E.) VF Door operator. F.) Calls register Signal.G.) Stainless Steel Facia plate for car operating Panel and landing fixtures. H.) ON-OFF Switch for fan and Light..) Voice Annunciator. J.) Mirror in inside Lift .35. Lift Duty motor of adequate capacity reduction worm gear, electromagnetic brake with compression springs, over speed Governor, Phase failure and phase reversal relay, alarm Bell, T Guide Brackets for car and Counter weight, Rubber padding under winding unit, car safety Gears, Buffer, Electro Mechanical Door Locks, Emergency Key, Side supporting angles motor Over Load Protection Devices. Final limit Switch, main suspension ropes, Counter weights, Lifting Joist for Mounting the Machineries.36. Site testing in accordance with IS 14665 should be carried out at the time of handing over.37. supplier of operation and maintanance manual with necessary tools for operation . 38. Disable friendly features as per differently abled act. 39. Two hours fire rated doors

Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only

Supply and fixing of 200A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with PWD earthing

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete.

Supply and fixing of 125A 30mA FP ELCB/RCCB in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Legrand(MDS) /Hager(L&T) make)

Supply and fixing of 3 phase 200 A aerial fuse unit for 3Nos. 200A fuse units (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable angle iron frame work the tapping pole with necessary clamps.

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

ADD GST 18%

RR & CO (BID ID -1275236)