REPAIR MAINT OF DEFECTIVE W/S PUMPING LINE TO STATIIC TANKS AT NAD, WED, NSD SEWRI AND OTHER MAINT WORKS IN THE AOR OF AGE EM MKD UNDER GE (NW) MANKHURD

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and not exceeding 10 sqm on plan and getting out in soft/loose soil for laying of cables, etc. complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm deep as in hard/soft soil complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point in soil including spreading in low lying area and leveling complete all as specified and as directed.

M&L for cutting existing road/hard standing not exceeding 45x50 cm in wide & depth getting out excavated material for laying GI tube, returning filling & well rammaing watering finish suraface 10 cm from top including provision of PCC 1:3:6 for repairing, including removal of surplus soil all as directed.

M & L for PCC 1:3:6 in round/ square shape as per site requirement of thickness not less than 3" suitable for fixing of cast iron tank cover complete all as specified and directed.

Blank

Blank

Blank

Blank

Blank

Blank

Taking up or down steel tubing and connections including cleaning and setting aside for refixing or as schedule of credit, etc complete all as specified and as directed for the 20 mm bore pipes including necessary staging/scaffolding as required.

Ditto all as per item No 12 above but 25 mm dia bore complete

Ditto all as per item No 12 above but 40 mm dia bore complete

Ditto all as per item No 12 above but 50 mm dia bore complete

Ditto all as per item No 12 above but 80 mm dia bore complete

Ditto all as per item No 12 above but 100 mm dia bore complete

Supply & Laying fixing, connecting and testing steel water tubing, medium grade, galvanised, with screwed and socketed joints, in any length, including supply and fixing all fittings, fixed to walls or laid in trenches / floors etc complete all as specified and as directed for the 20 mm bore, ISI marked. Make-: Tata/ Jindal/ BST/ Oswal

Ditto all as per item No 18 above but 25 mm dia bore complete

Ditto all as per item No 18 above but 40 mm dia bore complete

Ditto all as per item No 18 above but 50 mm dia bore complete

Ditto all as per item No 18 above but 80 mm dia bore complete

Ditto all as per item No 18 above but 100 mm dia bore complete

Supply and fix in repairs ISI Marked UPVC Pipe size 50 mm nominal dia,pressure pipe Schedule 80 with all connected acessories like UPVC bend,Tees,Unions,Sockets etc for each 3 mtr length of Pipe & solvent to join it all as specified and as directed. Make:Supreme/Dutron/Finolex/Duplon

Ditto all as per item No 24 above but 40 mm dia bore complete

Ditto all as per item No 24 above but 25 mm dia bore complete

Supply, lay/fix, connect and testing in repairs DI water tubing of 80 mm bore with spigot and socket ends class K-9 conforming to IS:8329/2000 suitable for rubber tyton joint including taking out old damaged CI main with fitting burning out joints and recovering lead complete etc as specified and directed.

Ditto all as per item No 27 above but 100mm dia bore complete

Ditto all as per item No 27 above but 150mm dia bore complete

Ditto all as per item No 27 above but 200mm dia bore complete

M & L in repairs DI fittings class K-12 conforming to IS:9523/2000 upto 200 mm dia of any type, size, such as bend, tapper, tail piece, tee piece, cross etc complete all as specified and directed.

S&F in repairs gunmetal gate or globe valve for 65 mm dia, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc and any addition / alteration required for fixing, complete all as specified and as directed. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No 32 above but 50 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No 32 above but 40 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No 32 above but 25 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No 32 above but 20 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Taking out sluice valves of size 80 mm to 100 mm and transporting to workshop for lathe work by refacing, regrinding, metalling and refixing back at site to match with standard size and refixing in position including replacing of worn out gland packing/washers /nuts/ bolts etc for the following size sluice valves. Note : Rate quoted is inclusive of cost of spare parts.

Ditto all as per item No 37 above but for size 150 mm to 200 mm dia bore complete.

S&F sluice valve 80 mm bore, cast iron body, flanged and drilled end, conforming to IS-14846, ISI marked, Class PN 1.6 including all joints with rubber or fibre board, gaskets, bolts and nuts, washers, iron wheel including taking up / down old unserviceable valves from any position and any addition / alteration for fixing required complete all as specified and as directed. Make-: Kartar/ Kirloskar/ Upadhyay

Ditto all as per item No 39 above but 100 mm dia bore complete. Make-: Kartar/ Kirloskar/ Upadhyay

Ditto all as per item No 39 above but 150 mm dia bore complete. Make-: Kartar/ Kirloskar/ Upadhyay

M&L for run lead joints to CI spigot and socket pipes of 80 mm bore and fittings including cleaning the joints, re-aligning the pipeline properly as required, cocking and jointing with old pig lead, including any addition / alteration for fixing required, testing pipelines for any leakage, making good any disturbed / damaged pipeline / parts etc, complete all as specified and as directed Note-: Necessary excavation and earthwork will be measured and paid separately

Ditto all as per item No 42 above but 100 mm dia bore complete

Ditto all as per item No 42 above but 150 mm dia bore complete

Fabricate supply and fix valve chamber covers made out of suitable size MS angle/MS plate/flat/rod,hinges, locking arrangement including painting with two coats of synthetic enamel paint over one coat of red oxide primer including removing existing unserviceable rusted cover all as directed.

Supply and fix in replacement ladder height 10 feet max, steps on every 01 feet made of angle iron of size 50x65x5 mm thick for sump including taking down old rusted iron ladder complete all as specified and directed.

Dismantling existing PVC water storage tanks and Supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity with and including covers, hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes etc complete all as specified and as directed Make-: Sintex/ Reno/ Plasto

Ditto all as per item No.47 above but 1000 litres capacity

Ditto all as per item No.47 above but 2000 litres capacity

Ditto all as per item No.47 above but 3000 litres capacity

Supply and fix in repair 50 mm bore PVC Ball valve ISI marked high presssure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. Make -: Prayag/Shakti

Ditto all as per item No.51 above but 40mm dia bore complete. Make -: Prayag/Shakti

Ditto all as per item No.51 above but 25mm dia bore complete. Make -: Prayag/Shakti

Ditto all as per item No.51 above but 20mm dia bore complete. Make -: Prayag/Shakti

M& L for draining out water complete cleaning & removing accumulated sludge/ dirt, scales from bottom of walls/ ceiling /top of slab and from mouths of circulating pipes of service tanks/ PVC tanks of capacity not exceeding 500 litres, located on roof of bldgs and disinfecting the tank using bleaching powder to make the tank bacteria free and depositing the rubbish in low lying areas of defence land, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground " cleaned on (date) due on (date) complete all as directed.

All as per item No 55 above but capacity of tank exceeding 500 litres but not exceeding 1000 ltrs complete.

All as per item No 55 above but capacity of tank exceeding 1000 ltr but not exceeding 2000 litres complete.

M&L for petty repair work by replacement of fittings such as elbow,socket,tee etc including any addition/ alteration in existing line and depositing the complaint slip in complaint cell after user signature complete as per directed by engineer in charge.

Taking out old/ unsv cast iron/ MS tank cover from RCC tank including dismatlling of RCC base support/ MS or cast iron frame and supplying & fixing cast iron tank cover in round shape of size 21 inches internal dia, with proper anchor in PCC with nut, bolts, anchor fastner etc with locking arrangement etc complete with two coats of black bituminous paint (drinking grade) for 1000 ltr/ 2000 ltr/ 3000 ltr all as specified and as directed sizes:- 508mm dia. (weight of tank cover not less than 12 Kgs) Note-: Plastering and PCC work shall measured and paid seperately

Dismantling of existing PVC water storage tank covers and Supplying and fixing PVC tank cover round shape of suitable size as per ground requirement with locking arrangement and fixed in position etc complete all as specified and as directed

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces cement plaster 1:6, all as specified and directed.

Supply and install of installation display board of size 4'' x 3" made out of ECO printing lamination and mounting on ACP sheet board with back side MS channel frame and MS 2 pole 50mm square pipe with black paint, including PCC foundation complete all as specified and directed. Note-: Detail to be writing on board shall be as per site/ installation requirement.

Supplying, fixing, jointing and testing non-return valve suitable for GI tubing of size 80 mm bore size, (ISI Marked) both ends flanged and drilled for jointing including two flange joints and jointing material such as nuts, bolts washers rubber packing etc including taking down complete all as specified and as directed. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No. 63 above but 50 mm dia bore complete all as specified & directed.

Supplying, fixing, jointing and testing non-return valve (Forged brass swing type check valve) suitable for GI tubing of size 40 mm bore including taking down complete all as specified & directed. Make :- Leader, Zoloto

Supplying, fixing, jointing and testing non-return valve (Forged brass swing type check valve) suitable for GI tubing of size 25 mm bore including taking down complete all as specified & directed. Make :- Leader, Zoloto

S & F foot valve of size 65 mm dia cast iron body, ball type, with flanged and drilled ends and synthetic rubber coated MS ball, conformimg to relevant IS, ISI marked, including all joints, gaskets, bolts and nuts, washers, including taking up/down old unserviceable valves from any position and any addition/alteration for fixing required complete all as specified and directed by the engineer in charge. Make : Kirloskar / Kartar or equivalant or as approved by GE.

M & L for dismantiling the existing valve chamber of size 900 X 900 X 900 mm including necessary earth work in any type of soil, PCC foundation D-2 1:3:6 in base concrete, brick work in CM 1:6 with 10 mm thick plaster internally and 15 mm thick externally in CM 1:4, 6 mm thick MS cover with hinges and locking arrangement fixed to angle iron frame made-out of 40 X 40 X 6 mm MS angles complete with 2 coats of synthetic enamel paint over one coat of red oxide zinc chrome primer on all metal works including necessary excavation earth work all plastered surfaces of valve chambers complete all as specified and directed by Engr-in-Charge.

Supply only Calcium hypo chlorite 65% -70% chlorine content granular based water disinfectent in sealed containers complete all as specified and as directed. Make:- 1.Aqufit manufactured by Sree Rayalaseema Hi strength Hypo Ltd. 2. Puri chlor manufactured by Sree Rayalaseema Hi strength Hypo Ltd. / M/s Ravi Enterprises / M/s Potter & Watts (Traditional products). Brands having pan india availability, acceptability & being manufactured /processed in open market termed as traditional products .The brands /makes must have certified by All India Institute of Hygenic & Public Health. 3. Declibac Technologies

Supply only Bleaching powder grade -I ISI marked having stable available chlorine % by mass minimum 35% as per IS 1065,1971 and packed in 25 Kg bag complete all as specified and directed. Make : Vikram or as approved by GE.

Lifting the submersible pump of 05 Horse Power from bore well,including flange/socket joints of delivery pipe, dismantling the flanged joints, lowering the submersible pump after repairing, by tightening the flanged/socket joints of column pipe, re-fixing of existing safety bucket with steel rope including taking down to workshop & rewinding and complete to make it operational /functional all as per specified and as directed.

S&F in repairs chlorine testing KIT with colored sample complete with all testing fitment and OT solution in rexine finish box. Make :- Techno Aqua Tech Pvt. Ltd./ Ion Exchange India/ Thermax/ Wipro

S&F in repairs chloroscope (Chlorine & PH test kit) for estimation of residual chlorine in water comprises of Plastic box, two tube, Droper and colour filter for colour estimation. Make :- Techno Aqua Tech Pvt. Ltd./ Ion Exchange India/ Thermax/ Wipro

S&F in repairs Water Quality TDS tester with ATC, Digital and Pocket type, Range : TDS 0-999 PPM(Mg/L) Model No :- ATDS0016. Make :- Techno Aqua Tech Pvt. Ltd./ Ion Exchange India/ Thermax/ Wipro

Supply and replace in repairs of New water meters confirming to ISO 4064:2005, including MS flange, nut bolts, rubber packing and flange thickness conforming to IS:7322-1985 and flange dimension conforming IS: 1538-1993 of size 100 mm dia suitable for installation on MS/DI/CI pipe line, including taking out old u/s water meter complete all as directed by Engineer in Charge. Make: Chambal/Kranti/Capston/Dashmesh/Accuflow or equivalent. Note: (a) Cleaning and grinding by 3 core welding of the pipe outside welding of the joint including cost of gas oxygen acetylene, welding machines, skilled and semi skilled workers internal lighting arrangements and all other incidental and operational charges etc. (b) The scope of work is inclusive of following and rate quoted is deemed to be inclusive in the amount quoted

M&L for complete rewinding and overhauling of 40 HP, 3-phase, 50 Hz, 415V electric motor, including disconnecting and dismantling existing burnt winding, rewinding with super-enameled copper wire of appropriate gauge using standard insulation materials (PVC sheets, cotton tape, sleeves, varnish, etc.), transportation of motor to and from workshop including loading/unloading, replacement of 2 Nos. ball bearings (make: SKF/NBC/TATA), renewal of terminal plate with brass studs, nuts, bolts, and washers, reinstallation at site with proper alignment, connection, and load testing, along with dismantling, cleaning, and overhauling of the coupled centrifugal/monoblock pump including replacement of defective components such as impellers, bushes, thrust bearings, clutch system, bowl assembly, pump shaft, and other unserviceable parts as required, followed by reassembly, alignment, commissioning, and on-load testing to ensure full operational efficiency, complete all as specified and directed.

All as per Item No 76 For Motor 25 HP Cap

All as per Item No 76 For Motor 20 HP Cap

All as per Item No 76 For Motor 15 HP Cap

All as per Item No 76 For Motor 10 HP Cap

All as per item No 76 for Motor 7.5/5 HP cap NOTE: Quoted rates shall be deemed to include one year warranty for motors after rewinding and commissioning.

M & L in repairs for servicing of Centrifugal pump set of capacity 20 HP by opening end covers, greasing the bearings, replacing worn out nut, bolts, gasket, air release valve key, gland stuffing box male/ female set, Rubber bush and painting one coat of synthetic enamel paint, including writing/marking in 1" size letters SM & MES No. for the following capacity of pumps:-

All as per Item No 82.00 above but Pump set 15 HP

All as per Item No 82.00 above but Pump set 5HP

M & L for preparation of existing painted steel pipes, including fire main lines, fire hydrant stand posts, and all exposed GI pipes, by removing the deteriorated paint layer through manual or mechanical scraping using wire brushes, scrapers, or sandpaper. The surface shall be thoroughly cleaned to remove dust, grease, rust, or any contaminants, ensuring an even, bare metal or sound substrate ready for painting and apply one coat of synthetic enamel paint, ensuring uniformity in thickness and adherence as per manufacturer specifications shall comply with IS standards, apply a compatible metal primer on bare metal sections before enamel application to enhance corrosion resistance and paint adhesion complete as per specifications and as directed by the engineer-in-charge. . Make :- Asian, Berger, Apex, or Nerolac

Material and labour for preparing old painted steel pipe surface such as Rising pipe (Red), Delivery pipe (Blue), Overflow pipe washout pipe (Yellow) etc and applying one coat of synthetic enamel paint include the removal of existing deteriorated paint layers using suitable mechanical or manual methods such as scrapers, wire brushes, or sandpaper, ensuring a clean and smooth substrate complete all as specified and as directed. Note:- (i)The arrangement of necessary equipment, such as ladders, scaffolding, or cranes, for accessing and working on pipes, shall be managed and provided by the contractor, and the cost of such arrangements is included in the quoted rate. Make : Asian / Berger / Apex / Nerolac

Dismantling the Decrin Dozing pump, cleaning, repairing, overhauling replacement of all unserviceable parts, nut, bolts, impellars, bushes, thrust bearing, clutch system, bowl assembly and repairing/replacement of pump shaft and re-assembling, commissioning and testing to make it operational / functional complete all as specified and as directed. Make : Declibac Technologies / Milton Roy or as approved by GE.

M&L for electric water pump (self priming) of capacity 0.5 HP, 220V, 50 Hz head range 06 to 24 m, insulation class B conforming to Crompton Mini force II commissioning and testing to make it operational / functional including taking down complete all as specified and as directed. Make : Havells / Kirloskar

S&F GI earth strip of size 32mm x 6mm including cutting, bending, welding, brazing, jointing, and fixing in position as required, taking down existing strip where applicable, and complete all as directed at site by Engineer-in-Charge.

Maint/Cleaning of Pump house stations inside and out side area and removing of creepers and vegetation raised along with water supply installation including surface dressing around the E/M installation not less then 3 mtr from out side fencing and removing the all waste material from site and Chemical spray inside and out side area of Sub station. Note:- T & P will be arreanged by contractor

Supply and Fixing in repairs industrial type pressure gauge made out of SS 304 material, SS sipon shall be factory insulated with closed cell elastomeric insulation in tubing form, pressure gauses shall be factory fitted with a ball valve complete, all as specified and directed.

Collecting water sample in clean bottle from location as directed for testing of physical test, chemical test, as per IS-10500-1991 from any government recognized institute and submitting test report complete. .Note: One job of sample collection and testing consist of 1 sample of source water and 1 from user end

S & F in repairs of motorised rolling shutter of capacity 400 K.g. of size 5000 mm (W) X 6000 mm (H) along with curtain made of single skinned galvalume steel laths with natural finish, pressed galvalume steel hood & motor cover with natural finish, CE certified CRS compact, gear P.R.C three station push button with deadman control, windlock storm anchor external safety brake complete as all specified and directed by the engineerg-in charge . The motorised rolling shutter shall confirm to the following technical specification: (i) Surface: Galvalume with natural finish (ii)Material thikness: 1.0 mm (iii) Curtein weight: 13 kg/m² approx (iv) Structure shape: Curved (v) Support Bracket mild steel wiih one coat of aluminium paint over coal of grey primer by spray. (vi) Shaft: Shaft is manufactured from mild steel tube of suitable outside diameter and wall thickness to suit the shutter application and is unsprung (vii) Finish : One coat of aluminium paint over a coat of Grev epoxy primer spray (viii) Side Guides: 5.0 mm thick heavy duty mild stee! storm guide (ix) Bottom Profile: Bend resistance double skinned extruded aluminium profiie forl additional strength. The bottom rail is filtted with exlruded rubber bottom, seal that will seal against the floor when the door is fully closed (x) Hood A Motor Cover. Pressed galvalune steel hood box complete with reinforced bracket as requried to suit the shutter width (xi) Drive Unit: Indirect drive operation (xii) Safety mechanism: Safety brake in accordance with EN- 14124-1: 2007 safety of machinary. (xiii)Contro! Swiich: Three station push button with deadman control (xiv) Emergency manual operation: Emergency operation by means of chain operation.

All as per Item No. 93 here in before but Capacity of 600 K.g

All as per Item No. 93 here in before but Capacity of 800 K.g

All as per Item No. 93 here in before but Capacity of 1000 K.g

All as per Item No. 93 here in before but Capacity of 1500 K.g

Comprehensive maintenance of Chemical Type Dehumidification Plant of capacity 900 CFM (1500CMH) to maintain condition of 40% x 5 RH complete including all equipments, accessories of make Bry Air model FFB-1500 total 12 No's unit complete installed at New CMT Complex Mankhurd comprising of the following:-

Scope of work as follows:- Servicing: 01. Checking the motors and starter / contactors. 02. Checking the operation and proper functioning of controls. 03. Checking up bed speed and bed drive. 04. Inspecting and cleaning the air filters. 05. Lubricating the bearings of motors, fans etc. 06. Inspection of “Reactivation” side “Regeneration Heat Source” 07. Inspection Of seals. 08. Inspection of draft gauge. 09. Checking the inlet & outlet dampers. 10. Inspection of Actuator unit. 11. Inspection of flexible connection of “Process” & “Reactivation” fans from unit. 12. Inspection of V-belt and adjustment of tension. 13. Checking the air pressure balancing and air flow of the system / unit. 14. Checking the plant performance. 15. Checking of all other charts furnished with the unit and their appropriate functioning as per system design.

Overhauling : Once A Year ( During Quarterly Visits) In addition to the ‘servicing’ mentioned above, the supervision of overhauling activity wil include the followings 1. Checking and inspection of bed(s), bed screen. 2. Checking and inspection of bed seal, centre divider seal and radius and end seal for 3. Greasing / lubricating of all motors, drives, bearings etc. 4. Checking and inspecting impellers of “Reactivation” fans as well as “Process” fan. 5. Cleaning and overhauling of draft gauge. 6. Change of V-belts, if necessary. 7. Overhauling of the bed drive gear reduction unit. 8. Checking of associate dust work for air vapour tightness. 9. Detailed check of the air pressure balancing of the system / unit. 10. Detailed check of the performance of the system.

S&F in repairs ULTRON LED polycarbonate T8 tube 20 Watt with in built driver with metal heat sink, Single/ double sided connection, 230 volts including fixing arrangements and taking down old unserviceable tube rod complete all specified and directed. Make-:Crompton / Havells /Bajaj/Jaquar/Wipro

S&F in Repairs/Replacement Surface and wall mounted batten suitable for LED tube 20-22 watts, 230 volts, including fixing mounting blocks 2 Nos, 1.5 sqmm 3 core PVC insulated copper conductor cable including fixing arrangements and taking down old rusted bracket fittings complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro

Supply and fix in repairs decorative recessed type LED light fitting 35/36 watt (size 2'x2') 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements and taking down old rusted bracket fittings complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro

Supply & fix in repairs recess & surface LED 1 ft x 4 ft panel ceiling light fitting 40 Watt (SPAN) with high brightness SMD LED as light source and including driver unit, including provision of 3 core copper flexible cable size 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro

Supply & fix in repairs LED Highbay light fittings 150 watts, Energy saving, environment friendly & robust open type vertical Highbay LED IP 66 luminaire including driver and required GI tube down road of length up to 2 meter with hoooks for hanging the fitting. The fitting including fixing arrangements and taking down old rusted bracket fittings complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro Note : Fittings shall will be installed in Hangers/Sheds, height up to 10 Meters only and directed by Engr-in-Charge.

Supply & fix in repairs very high efficiency round LED Highbay light fittings 150 Watt in PDC housing, IP 66 luminaire including driver and required GI tube down road of length up to 2 meter with hoooks for hanging the fitting including fixing arrangements and taking down old rusted bracket fittings complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro Note : Fittings shall will be installed in Hangers/Sheds, hight up to 10 Meters only and directed by Engr-in-Charge.

S&F in repair of building Security light fitting made up of pressure die cast alluminium body with mid power 60 Watt LED (PINNACLE PLUS) as lighting sources and PC cover having Top opening seperate driver compartment with IP66 protection Including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make-:Crompton /Bajaj/Jaquar/Wipro

M & L in repairs for GI steel tubing medium grade 40mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 40mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

Supply & Fix in repairs MCCB DB TPN 4 Way double door prewired suitable for Triple Pole 125 A incomer MCCB with the following acessories including taking down u/s DB - a) MCCB TP 125 A 25 KA 415 Volt - 1 Nos b) Bus bar, Din rail , Neutral link Make -Indoasaian/Legrand/ABB/Schneider

Supply & Fix in repairs MCB DB SPN 2 way 240 volts Single door, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make -Indoasaian/Legrand/ABB/Schneider

Supply & Fix in repairs MCB DB SPN 4 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make - Indoasaian/Legrand/ABB/Schneider

Supply & Fix in repairs MCB DB SPN 8 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make - Indoasaian/Legrand/ABB/Schneider

Supply & Fix in repairs MCB DB SPN 12 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make -Indoasaian/Legrand/ABB/Schneider

Supply & Fix in repairs TPN DB 4 way 415 volts Double door, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make - Indoasaian/Legrand/ABB/Schneider

S&F in repairs single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts including taking down old u/s complete all as specified and directed. Make - Indoasain/Legrand/L&T

S&F in repairs of Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amp 415 Volts including taking down old u/s complete all as specified and directed. Make - Indoasain/Legrand/L&T

M&L in repairs for MCB SP, 240 volt, 5 to 32 Amps, 10 KA, C Curve, including taking down old u/s complete all as specified and directed. Make - Indo Asian/Legrand/ ABB/Schneider/L&T

M&L in repairs for MCB SPN, 240 volt, 40 to 63 Amps, 10 KA, C Curve, including taking down old u/s complete all as specified and directed. Make - Indo Asian/Legrand/ABB/Schneider/L&T

M&L in repairs for MCB TPN, 240 volt, 40 to 100 Amps, 10 KA, C Curve, including taking down old u/s complete all as specified and directed. Make - Indo Asian/Legrand/ABB/Schneider/L&T

S&F in repairs GI strip size 25 x 4 mm all as directed including welding brazing and taking down of old copper strips as required at site

Taking down old unserviceable High bay, Mid Bay, Flame Proof light fittings from walls/Builings/Sheds/Ceiling height up to 10 Meter for repairs and replacement of burnt/worn out accessories and refixing the same in existing position including testing of fittings after repair, testing of connected wiring complete all as directed by Engineer in charge . Note :- (a) T & P, Ladder for any height etc are deemed to be included in the quoted rate. (iii) The representative of the contrcator shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contrcat period and the defect shall be rectified on the same day (iii) A penal recovery of Rs 500 Per Day Per Complaint for not attening the compalint will be recovered

Supply and Fix in repairs CIMFR certified LED flame proof tube light fitting 1 X 16/20 Watts, with driver & LED tube rod, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of size 1.5 Sqmm with flexible metal conduit, including fabrication and fixing of red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut bolts, hooks, chain etc including taking down old u/s fitting Make : Crompton/ Shyam Switch Gear /Bajaj / Sudhir Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

Supply and Fix in repairs CIMFR certified LED flame proof tube light fitting 2 X 16/20 Watts, with driver & LED tube rod, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of 1.5 Sqmm, with flexible metal conduit, including including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut, bolts, hooks, chain etc including taking down old u/s fitting. The Fitting Shall Conform to Make : Crompton/ Shyam Switch Gear /Bajaj / Sudhir Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

Supply and Fix in repairs CIMFR certified LED flame proof well glass light fitting 60 watts , with driver & LED, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of 1.5 Sqmm, with flexible metal conduit, including including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut, bolts, hooks, chain etc including taking down old u/s fitting. The Fitting Shall Conform to Make : Crompton/ Shyam Switch Gear /Bajaj / Sudhir Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

S&F in repairs flame proof WP rotory type, 10/16A, single pole 250V switch with cable termination box in LM6. Make : Shyam switch gear/Sudhir

Supply & fix in repairs UPVC panel trunking of size 25 mm X 25mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed Make - Precision Cat No PPT 2525 or Equivalent from Presto Plast/Finolex

Supply & fix in repairs UPVC panel trunking of size 45 mm X 45mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed Make - Precision Cat No PPT 4545 or Equivalent from Presto Plast/Finolex

Supply & fix in repairs UPVC panel trunking of size 100 mm X 100mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed Make - Precision Cat No PPT 100100 or Equivalent from Presto Plast/Finolex

Supply & fix in repairs UPVC panel trunking of size 300 mm X 100mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed Make - Precision Cat No PPT 100100 or Equivalent from Presto Plast/Finolex

Supply only portable water from approved and authorised water point through water bowser to MES water supply installation at Thane location under GE (NW) Mankhurd in any situation/when required complete all as specified and directed by Engr-in-Charge. Note:- (a) Source of water supply shall be got approved before procurement of water.

S&F in repairs the following component in existing LT Kiosks (Idoor/Outdoor) including disconnecting and taking down at different locations all as directed :- Voltmeter Digital type ,0-500 Volts of size 96x96mm.

All as per item No 129 but Ammeter Digital type of upto 400 amps capacity of size 96X96mm.

M&L in repairs Phase indicating lamp neon type complete with holder assy RYB phase complete.

M&L in repairs CT coils any capacity suitable for 1100volts, 50Hz, AC, supply complete.

Drilling and taping cast iron water mains (in position) for branch connections 15 mm bore of the internal dia.

-Ditto- all as per item No 134.0 above but 20mm bore

-Ditto- all as per item No 134.00 above but 25mm bore

-Ditto- all as per item No 134.00 above but 40mm bore

-Ditto- all as per item No 134.00 above but 50mm bore

M & L for preparation of old painted / unpainted surfaces of any description, including taking out of parts / components under painting (if required) from any position / location as listed hereinunder and applying one coat of epoxy paint (with colour code maintained as per relevant IS) including marking with flow directions (of approved colour) complete al as specified and as directed by the Engineer-In-Charge. Make:- ASIAN/BERGER/APCOLITE Note: each job consist a LT Panel or Electric Motor/Sluice Valve/AMF panel etc

M & L for laying of LT XLPE insulated, armoured heavy duty 1100 volt grade electric cable with aluminium conductor of size 2 Core 10 Sqmm in wall/Roof/steel Structures of buildings/Storgae Sheds etc complete all as specified and directed by Enginner incharge including of cable glands, lugs & making all connections complete as required at site and as directed by Engr-in-Charge. Make - KEI/ Polycab/ Gloster/ Havells

M & L for laying of LT XLPE insulated, armoured heavy duty 1100 volt grade electric cable with aluminium conductor of size 2 Core 6 Sqmm in wall/Roof/steel Structures of buildings/Storgae Sheds etc complete all as specified and directed by Enginner incharge including of cable glands, lugs & making all connections complete as required at site and as directed by Engr-in-Charge. Make - KEI/ Polycab/ Gloster/ Havells

S&F in repairs electronic timers for star-delta starter three phase 415 volts including taking down old unserviceable starters complete.

M& L for load balancing of a LT Panel job consist of checking the load in three phases in different time period as 9.00 am,2.00 PM and 9.00 PM and distribute load to make load balance as possible

Supply and fix outdoor type vermin and weatherproof totally inclosed cubical type front operated, sufficient ventilation on sides cubicle type fabricated out of 3.15 mm thick CRCA sheet duly treated with seven tank process and painted epoxy powder coated siemens grey colour and with industrial type built in locking arrangement. The Panel indoor type cubical panel board IP 52 free standing floor mounted (CPRI approved manufacturers). The panel to be prewired with PVC insulated copper conductors appropriate current carrying capacity for connecting the incoming and out going MCCBs and MCBs. including disconnecting the LT panel and taking down the unserviceable cables and including MCBs.. Disconnecting the incoming and out going cable connection and dismantling the unserviceable conventional type industrial meter board and removing from site for further disposal and making LT UG cable connection complete consist of following items:- Location Near OC Residence and Near Offrs Qtrs at Thane

Note : A SUM OF RS 64,726.00 TOWARDS SCHEDULE OF CREDIT SHALL BE DEDUCTED TO ARRIVE THE CONTRACT SUM

M/s Shree Construction Co (BID ID -3463428)

R.C. Magla and Co. (BID ID -3464313)

M/s Mukesh Engineers (BID ID -3464179)

M/S SOMANATH ENTERPRISES (BID ID -3464380)

Shree Ayyappa Engineering (BID ID -3464284)

cooltech engineering services (BID ID -3464327)

sapana enterprises (BID ID -3464117)