Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹50.0 LAdmitted-Finance | ₹50.0 L | L1 | Admitted-Finance |
| 2 | L2₹51.6 LAdmitted-Finance 70 SUBHASH ROAD HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | ₹51.6 L | L2 | Admitted-Finance |
| Rank | Bidder | Total Amount |
|---|---|---|
| L1 | M/S SWATI CONSTRUCTION Bid ID 3576663 | ₹49,95,231 |
| L2 | M/S SHIVA CONSTRUCTION Bid ID 3577283 | ₹51,58,506 |
| Sl No | Description | Qty | Unit | M/S SWATI CONSTRUCTION L1 | M/S SHIVA CONSTRUCTION L2 |
|---|---|---|---|---|---|
| 1.00 | Refixing / reinstallation of plumbing fittings without issue of materials from MES stores, including attending complaints such as leakage or malfunction, and carrying out refixing, adjustment, tightening, alignment, sealing and testing of existing plumbing fittings including bib taps, pillar taps, angle valves, stop cocks, float valves of water tanks, gratings, traps, WCs flushing cisterns, waste pipes, WHBs, EWCs, and other similar fittings, using old serviceable materials / fittings already available at site, by employing an experienced team of plumbers and helpers, complete, so as to restore the existing water supply and sanitary services to the satisfaction of the Engineer-in-Charge. | 500 | Each complaint | 160 ₹80,000 | 170 ₹85,000 |
| 1.01Contd/... Notes:- (i)No materials shall be issued from MES stores under this item. Only refixing, adjustment and minor consumables such as PTFE tape, rubber washers, screws, nuts & bolts, sealant, etc. shall be deemed included in the quoted rate. (ii)All complaints under this item shall be attended and fully resolved within 24 hours from the time of issue of complaint / job order by the Engineer-in-Charge or Complaint Cell. (iii)T&P, including conveyance required to attend complaints door-to-door, shall be provided by the contractor. (iv)Complaint slips / job orders shall be collected by the contractor or his authorised representative in writing from the Complaint Cell In-charge / JE (Civil). (v)The area / location of work shall cover all MD and OTM accommodation in Varanasi Cantt." | |||||
| 2.00 | Attending plumbing complaints such as leakage of taps, angle valves, stop cocks or pipes, and carrying out taking down of existing fittings and fixing with new items of plumbing fittings including bib taps, pillar taps, GI tubing, stop cocks, angle valves, float valves of water tanks, gratings, traps, WCs flushing cisterns, waste pipes, WHBs, EWCs, and other similar works, for ensuring continuity of essential internal water supply and sanitary services, by employing an experienced team of plumbers and helpers, complete, so as to restore the existing services to the satisfaction of the Engineer-in-Charge.
Notes:-
(i)T&P, including conveyance required to attend complaints door-to-door, shall be provided by the contractor.
(ii)Complaints shall be segregated based on resolution time, and materials (if required) shall be issued accordingly to the contractor. The categories shall be: | 450 | Each Complaint | 180 ₹81,000 | 200 ₹90,000 |
| 2.01Contd/... (iii)Urgent complaints – to be attended and resolved within 24 hours (iv)Semi-urgent complaints – to be attended and resolved within 3 days (v)Routine complaints – to be attended and resolved within 7 days (vi)Materials shall be separately measured and paid under the relevant item(s) of Schedule ‘A’. (vii)Complaint slips shall be collected by the contractor or his authorised representative in writing from the Complaint Cell In-charge / JE (Civil). (viii)The area / location of work shall include all MD and OTM accommodation in Varanasi Cantt. | |||||
| 3.00 | M&L for Cleaning of HDPE tank of capacity up to & including 500 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date with stencil and removing sludge, scale mud etc to a distance not exceeding 50 metre & depositing and removal of vagitation around tank area complete all as specified and directed.
Note: 1. Contractor will maintain a pucca bound register and cleaning activities will be recorded duly signed by AGE and User rep.
2. Ladder to be arranged by Contractor (rate inclusive in this item) whereever unaccessible roof is there upto a height of 12 m. | 600 | Each | 270 ₹1,62,000 | 300 ₹1,80,000 |
| 4.00 | M&L for cleaning of HDPE tank of capacity up to & including 1000 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date with stencil and removing sludge, scale mud etc to a distance not exceeding 50 metre & depositing and removal of vagitation around tank area complete all as specified and directed.
Note: 1. Contractor will maintain a pucca bound register and cleaning activities will be recorded duly signed by AGE and User rep.
2. Ladder to be arranged by Contractor (rate inclusive in this item) whereever unaccessible roof is there upto a height of 12 m. | 60 | Each | 350 ₹21,000 | 400 ₹24,000 |
| 5.00 | Supply only 15 mm size bib cock with wall flange cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.
Make : Jaquar Model No OPP-CHR-15037PM or equivalent in Grohe or Kohler | 30 | Each | 1,700 ₹51,000 | 1,900 ₹57,000 |
| 6.00 | Supply only 15 mm size Angular Stop Cock with Wall Flange, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.
Make : Jaquar Model No KUP‑CHR‑35053PM or equivalent in Grohe or Kohler | 15 | Each | 1,350 ₹20,250 | 1,350 ₹20,250 |
| 7.00 | Supply only Single Lever Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges, complete all as specified and directed.
Make : Jaquar Model No OPP-CHR-15117PM or equivalent in Grohe or Kohler | 5 | Each | 7,000 ₹35,000 | 7,000 ₹35,000 |
| 8.00 | Supply only 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed.
Make Jaquar Model No COP-CHR-167BPM or equivalent in Grohe or Kohler | 15 | Each | 4,350 ₹65,250 | 4,350 ₹65,250 |
Updated dates
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
30 Mar 2026, 6:00 pmClosed
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
ANNUAL PERIODICAL MAINT OF B/R AND E/M NATURE WORK AT VARANASI CANTT.
2025_MES_720661_3
8808/E8
Open Tender
Civil Works
180 days
Varanasi
AS PER NIT
7 documents required · 7 mandatory
₹500
GE (East) Prayagraj
₹96,000
Yes
7 Apr 2026
28 Feb 2026
4 Apr 2026
28 Feb 2026
30 Mar 2026
16 Mar 2026
28 Feb 2026 - 7 Mar 2026
Refixing / reinstallation of plumbing fittings without issue of materials from MES stores, including attending complaints such as leakage or malfunction, and carrying out refixing, adjustment, tightening, alignment, sealing and testing of existing plumbing fittings including bib taps, pillar taps, angle valves, stop cocks, float valves of water tanks, gratings, traps, WCs flushing cisterns, waste pipes, WHBs, EWCs, and other similar fittings, using old serviceable materials / fittings already available at site, by employing an experienced team of plumbers and helpers, complete, so as to restore the existing water supply and sanitary services to the satisfaction of the Engineer-in-Charge.
Contd/... Notes:- (i)No materials shall be issued from MES stores under this item. Only refixing, adjustment and minor consumables such as PTFE tape, rubber washers, screws, nuts & bolts, sealant, etc. shall be deemed included in the quoted rate. (ii)All complaints under this item shall be attended and fully resolved within 24 hours from the time of issue of complaint / job order by the Engineer-in-Charge or Complaint Cell. (iii)T&P, including conveyance required to attend complaints door-to-door, shall be provided by the contractor. (iv)Complaint slips / job orders shall be collected by the contractor or his authorised representative in writing from the Complaint Cell In-charge / JE (Civil). (v)The area / location of work shall cover all MD and OTM accommodation in Varanasi Cantt."
Attending plumbing complaints such as leakage of taps, angle valves, stop cocks or pipes, and carrying out taking down of existing fittings and fixing with new items of plumbing fittings including bib taps, pillar taps, GI tubing, stop cocks, angle valves, float valves of water tanks, gratings, traps, WCs flushing cisterns, waste pipes, WHBs, EWCs, and other similar works, for ensuring continuity of essential internal water supply and sanitary services, by employing an experienced team of plumbers and helpers, complete, so as to restore the existing services to the satisfaction of the Engineer-in-Charge. Notes:- (i)T&P, including conveyance required to attend complaints door-to-door, shall be provided by the contractor. (ii)Complaints shall be segregated based on resolution time, and materials (if required) shall be issued accordingly to the contractor. The categories shall be:
Contd/... (iii)Urgent complaints – to be attended and resolved within 24 hours (iv)Semi-urgent complaints – to be attended and resolved within 3 days (v)Routine complaints – to be attended and resolved within 7 days (vi)Materials shall be separately measured and paid under the relevant item(s) of Schedule ‘A’. (vii)Complaint slips shall be collected by the contractor or his authorised representative in writing from the Complaint Cell In-charge / JE (Civil). (viii)The area / location of work shall include all MD and OTM accommodation in Varanasi Cantt.
M&L for Cleaning of HDPE tank of capacity up to & including 500 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date with stencil and removing sludge, scale mud etc to a distance not exceeding 50 metre & depositing and removal of vagitation around tank area complete all as specified and directed. Note: 1. Contractor will maintain a pucca bound register and cleaning activities will be recorded duly signed by AGE and User rep. 2. Ladder to be arranged by Contractor (rate inclusive in this item) whereever unaccessible roof is there upto a height of 12 m.
M&L for cleaning of HDPE tank of capacity up to & including 1000 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date with stencil and removing sludge, scale mud etc to a distance not exceeding 50 metre & depositing and removal of vagitation around tank area complete all as specified and directed. Note: 1. Contractor will maintain a pucca bound register and cleaning activities will be recorded duly signed by AGE and User rep. 2. Ladder to be arranged by Contractor (rate inclusive in this item) whereever unaccessible roof is there upto a height of 12 m.
Supply only 15 mm size bib cock with wall flange cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. Make : Jaquar Model No OPP-CHR-15037PM or equivalent in Grohe or Kohler
Supply only 15 mm size Angular Stop Cock with Wall Flange, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. Make : Jaquar Model No KUP‑CHR‑35053PM or equivalent in Grohe or Kohler
Supply only Single Lever Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges, complete all as specified and directed. Make : Jaquar Model No OPP-CHR-15117PM or equivalent in Grohe or Kohler
Supply only 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed. Make Jaquar Model No COP-CHR-167BPM or equivalent in Grohe or Kohler
Supply only Sink Mixer with Swinging Spout (Wall Mounted Model) with connecting legs & Wall Flanges complete all as specified and directed. Make Jaquar Model No CQT-CHR-23309 or equivalent in Grohe or Kohler
Supply only overhead Rain shower SS 100 mm dia (4") with 200 mm (8") long shower arm and wall flange complete all as specified and directed. Make: CERA model no F7020109SS or equivalent in Jaquar/Grohe/Kohler
Supply only Hand Shower (Health Faucet) with 8mm Dia, 1.0m long flexible tube & Wall Hook complete all as specified and as directed. Make Jaquar Model No ALD-CHR-573 or equivalent in Grohe or Kohler
Supply only 15 mm size two way bib tap with wall flange , chromium plated Brass, fancy type with capstan head, screwed down, screwed for iron pipes,complete all as specified and directed. Make Jaquar Model No COP-CHR-041PM or equivalent in Grohe or Kohler
Supply only 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed
Supply only PVC Rigid waste pipe 32 mm dia and over for fixing in urinals and wash basin ,kitchen sink complete all as specified and directed.
Supply only 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed, complete all as specified and directed.
Supply only PPR Gate valve (Brass Insert) for Pipe Dia 25mm OD as per site requirement complete all as specified and directed.
Supply only 600 mm long PVC connections 15 mm size with PTMT nuts at both end, complete all as specified and directed.
Supply only 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
Supply only waste coupling of 32 mm size chromium plated for glazed ware wash basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.
Supply only waste coupling of 40 mm size brass chromium plated for sink , etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete all as specified and directed.
Supply only Stainless Steel grating (round) 125 mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.
S&F 110mm UPVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
S&F 75mm UPVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
S&F 110 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.
S&F 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.
S&F 110mm UPVC (SWR) bends any radius with access door, complete all as specified and directed.
S&F 75mm UPVC (SWR) bends any radius with acess door, complete all as specified and directed.
S&F 75 mm UPVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified and directed.
S&F 110mm UPVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified and directed.
S&F 110mm UPVC (SWR) vent cowl, complete all as specified and directed.
S&F in repair 75mm UPVC floor trap plain with grating including jointing with solvent cement, complete all as specified and directed.
Supply only UPVC bottle trap, of approved make and quality, including all fittings, washers, unions and necessary connections to wash hand basin (WHB) / sink, complete, including cutting, jointing, testing for leakage and making good disturbed surfaces, all as directed, to the satisfaction of the Engineer-in-Charge.
Taking down wash hand basin or sink of any type complete all as specified and directed
S&F vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm excluding taps and plug but including bracket or any other fixing arrangement, waste coupling of 32 mm size fixed complete all as specified and directed by Engineer-in-Charge.
S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
Taking down vitreous china water closet of any type complete all as specified and directed.
S&F white vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, with P Trap,and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim all including all connection complete all as specified and directed. Cera Cat Part No S1053102 or equivalent model of Parryware/Hindware
Taking down steel plate rack of any type complete all as specified and directed.
S&F Stainless steel plate rack / utensils rack of size 900mm x 1200mm x 300mm depth made out ot 0.63mm thick stainlesss steel sheet, fixed to wall with brass screws including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, the plate rack shall conform to the sample kept in sample room of AGE B/R Old Cantt, complete all as specified and directed. Make: Neelkamal, Nirali, Blue star, Prayag or equivalent
Taking down PVC water tanks of capacity 500 liters from unaccessible roofs incl disconnecting pipes complete all as specified and directed.
Supply and fix 500 liters capacity white colour, triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
Demolition of RCC service tanks of capacity upto 2000 liters and removal of debris at designated location all as directed by Engineer in charge.
Taking down PVC water tanks of capacity 1000 liters from unaccessible roofs incl disconnecting pipes complete all as specified and directed.
Supply and fix 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (wall, ceiling, floors, etc.) 15 mm bore of pipe complete all as specified and as directed.
Refixing old steel tubing and connections in new or old position(wall,ceiling,floors etc.) 20 mm bore of pipe complete all as specified and directed.
Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed by Engineer-in-Charge.
Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store 25 mm bore pipe complete all as specified and directed.
Supply and fix 25 mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.
Attending complaints related to carpenter works and obtaining completion certificate from the user, including repair, easing, fixing and tightening of doors and windows, re-securing of door/window wire gauge, fixing only of builder’s hardware, helical door springs, and carrying out all incidental works using nails, screws and similar minor consumables required to make the work good, for ensuring continuity of essential carpentry services, by employing a team of experienced carpenters with helpers, complete, so as to restore the existing services to the satisfaction of the Engineer-in-Charge, all as directed.
Contd/... Notes: T&P, including conveyance required to attend complaints door-to-door, shall be provided by the contractor and shall be deemed to be included in the quoted rate. Only fixing labour is included under this item. Supply of builder’s hardware or any other stores/fittings, if required, shall be paid separately under the relevant “Supply Only” items of Schedule ‘A’. Complaint slips / job orders shall be collected by the contractor’s authorised representative in writing from the Complaint Cell In-charge / JE (Civil). The area / location of work shall include all MD and OTM accommodation in the Varanasi Cantt
Supply only sheet glass corner shelf set of one with complete all as specified and directed. Make Model No. WPT6010A1 in parryware or equivalent in Hindware or Cera
Supply only in Single Towel Rail 600mm Long, Stainless Steel including brackets fixed to wall stainless steel screws, complete all as specified and directed. Make Jaquar Model No. ACN-CHR-1111SM or equivalent in Grohe or Kohler
Supply only SS soap dish complete all as specified and directed. Make Cera/Parryware/Hindware
Supply only Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make- F880010CP of hindware or equivalent in Parryware or Cera
Supply only PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screw all as specified and as directed.
Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
Material only for 4.8 mm thick plain sheet glass ordinary quality and glazing with clip n exc 0.5 sqm in each pane complete all as specified and as directed.
Material only for for 4.0 mm thick frosted sheet glass ordinary quality and glazingoil putty n exc 0.5 sqm in each pane complete all as specified and as directed.
Supply only 25 mm dia chromium plated curtain rails including brackets and knob as required ( one pair of bracket and knob for each rail) etc. complete all as specified and directed.
Taking down and re-fixing the existing wooden shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed.
Taking down and re-fixing the existing wooden shutter in same opening after & including necessary easing/repair etc.n exc.1 Sqm complete all as specified and directed.
M&L for easing / adjusting of steel doors/ windows and oiling/ greasing/ welding for smooth functioning complete all as specified & directed by the Engg-in -charge .
Material and labour for repairing aluminium doors/window including refixing tightening and making good with using rubber/beads/locks and others fixtures/fittings floor machine , glass, handle, lock etc. if required and making serviceable complete all as specified and directed.
M&L for repairs to existing steel rolling shutters by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover / hood etc, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint complete all as specified & directed.
Supply only 2nd Class hard wood plain fillets square/ rectangular in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, wrought and fixed with nails complete all as specified and directed.
Supply only 250/300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed.
Supply only 100 mm long Stainless steel hinges all as specified and as dierected by Engineer-In-Charge.
Supply only 100 mm size stainless steel handle all as specified and as dierected by Engineer-In-Charge.
Supply only 150 mm size stainless steel handle, fabricated type all as specified and as dierected by Engineer-In-Charge.
Supply only 100 mm long stainless steel barrel tower bolt all as specified and as dierected by Engineer-In-Charge.
Supply only 150 mm long stainless steel barrel tower bolts all as specified and as dierected by Engineer-In-Charge.
Supply only 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete all as specified and directed.
Supply only 100 mm size 4-lever mild steel mortice lock vertical type with two keys etc complete all as specified and directed.
Supply only floor door stopper of Aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length of 150 mm size complete all as specified and directed.
Supply only Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.
Supply only 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws
Supply only Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge,thickness,including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F roof trusses (framed), trussed, purlins,crane grantries, pillars, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, Hollow or flat sections)including distance pieces,cleats etc.Fe 410-W (Gde - E-250) quality - A complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa fixed over angle iron/pipe framework as in sunshade to windows or balconies upto a height of 12m from the ground level including fixing with self tapping screws complete all as specified and directed.
S&F steel framework for supporting sunshades to windows or balconies up to a height of 12m fabricated from angle iron, channel,pipe tee or flat sections including brackets, cleats, distance pieces , bolts and nuts and washers conforming to Fe 410-W (Gde - E-250) quality - A including preparation of surfaces and painting with one coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) external surface, complete all as specified and directed.
Supply only Integral crystalline water proofing compound of approved make, complete all as specified and directed.
M&L for rendering 10 mm thick in CM (1:6) on Brick/ Concrete surface finished even and fair on internal surfaces of wall, complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling, complete all as specified and directed.
M&L for Complete removal of existing treatment on exterior surface of wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour, complete all as specified and directed.
Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & color stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algal propertiess in two coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer instruction applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m. the spray machine should be of reputed paint manufacturer as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface using auto roller for making the surface uniform complete all as specified and directed. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
Contd/... Mame of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in appx B Note- The contractor shall obtain approval of the agency from GE and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE. The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defectlibality period, if any defect is noticed, the contractor shall only be responsible for the rectification of same.
Material and labour for 1mm thick wall care putty with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. Mame of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in Appx 'D' in PS.
M&L for scrapping with wire brush/sanding paper and preparation of surface to make surface clean, free from dust, loose paint etc all as specified and directed
M&L for preparation of new or old plastered surface and applying two coats of oil bound distemper on walls incl 1 mm thick wall care putty, complete all as specified and directed.
M&L for preparation of new/old plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
M&L for preparing steel/wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and incl a coat of red oxide/pink primer complete all as specified and directed.
S & F Solid PVC Wall Lining consisting of 5mm thick decorative type PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.
S & F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and as directed by Engineer in charge.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.
Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed.y Engr-in-Charge.
Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed.
M&L for wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required One light point controlled by one way modular switch 6 Amps including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.
All as per item No. 107 above but cable 2.5 sqmm FRLS for one 5 pin 5 Amp socket outlet point on an independent board.
All as per item No. 107 above but cable 2.5 sqmm FRLS for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per item No. 107 above but for one bell/buzzer point controlled by one bell push single pole one way .
All as per item No. 107 above but for Two way point control by Two two way 5 Amp swithes.
All as per item No. 107 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.
All as per item No. 107 above but an independent board with cables of size 4.0sqmm (for Geyser & AC).
S & F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed.
S & F for switch piano, flush type, 5 amps, single pole , two way , 230 volt complete all as specified and directed.
S & F bell push switch 5 Amp flush type complete all as specified and directed.
S & F for 5 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.
S & F in repair switch piano type 15 Amps single pole one way ISI marked.
S & F in repair socket outlet 6 pin 5 & 15 Amps flush type ISI marked
S&F switch socket combination 2 in 1, 6 pin 16Amps multipurpose type 240 volts complete all as specified and directed.
S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F in repair for modular switch 1 way 6 Amp complete all as specified and directed.
S&F in repair for modular switch 2 way 6 Amp complete all as specified and directed.
S&F in repair for modular switch 1 way 16 Amp complete all as specified and directed.
S&F in repair for modular switch bell push 6 Amp complete all as specified and directed.
S&F in repair for modular socket universal 6/16Amp combined 2 Module with ISI marked complete all as specified and directed.
S&F in repair for modular socket universal 6A-2/3 pin type ISI Marked complete all as specified and directed.
S&F LED retrofit lamp of capacity 12 watt, B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.
S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.
Supply & fixing fan regulator, modular type, 120 watt single phase complete all as specified and directed.
S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 8 way 415 Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40Amp current carrying capacity in the MCB DB complete with connection testing and commissioning.
S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.
S&F MCB TPN, 40-100 Amps 415 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.
S&F 1 x 10W LED Mirror light fitting,2 feet, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.
S&F LED tube light fittings of 18/20 wattage including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.
S&F decorative wall light fixture made up of Polycarbonate, suitable for 15W TU retrofit LED bulb (B-22 base) polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make Havells Cat No CITY 3, LHDL06160099 or equivalent of Philips / Crompton.
S&F 35 Watt road lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed. Make Philips/ Havells/ Bajaj/ Crompton.
S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FR PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, complete all as specified and directed. NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire.
Taking down carefully ceiling fan by disconnecting all electrical connection, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed. (NOTE: Existing fans shall be deposited by the contractor in AGE E/M Varanasi yard).
Taking down existing Exhaust fans including mosquito mesh net with frame for existing hole and electrical connection and depositing to MES store and S&F of new exhaust fan heavy duty exhaust fan 300 mm sweep ,single phase 240 volt including making holes and electrical connection through wire of 3 core 23/0.0076 copper conductor marking MES No wirh paint complete all as specified and directed.
Taking down existing Exhaust fans including mosquito mesh net with frame for existing hole and electrical connection and depositing to MES store and S&F of new plastic exhaust fan 250 mm sweep ,single phase 240 volt including making holes and electrical connection through wire of 3 core 23/0.0076 copper conductor marking MES No wirh paint complete all as specified and directed.
S&F in repair two pin and earth plug and socket with 1 MCB single pole 20 to 32amps 'C' series 10KA in sheet metal enclosure and connecting complete all as specified and directed.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply earthing complete all as directed.
Supplying ,laying, commissioning & testing 16 Sqmm, 4.0 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down old / unserveciable existing cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.
Supply and fix PVC sheathed white colour three core copper flexible cable of size 23/.0076 complete all as specified and directed.
S&F Heating element threaded/ screwed/ triangular or cup style type 2000 Watt ISI marked of suitable make , complete all as specified and directed.
S&F Thermostat suitable for 25 or 50 litre capacity of geyser, range 20 to 80 degree ISI marked, without taking down geyser, fixed in repair, complete all as specified and directed.
S&F PVC connection cotton braided heavy duty with brass union/ coupling of length 450 mm with rubber washer suitable for 15 mm dia pipe for hot or cold water connection, without taking down geyser, fixed in repair, complete all as specified and directed.
S&F condenser of 2.5 MFD, 440 Volt AC, conforming to IS-1709 suitable for fans complete all as specified and directed.
stage.html
html • 0.03 MB
technical_845399.pdf
techsummary_845399.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
Tender.pdf
Tender Documents • 1.66 MB
BOQ_845399.xls
BOQ • 0.50 MB
Download all tender documents and submit your bid