Provn of covered accn, parking shed with hard standing for B Vehs at MTPark 78Inf Bde and GR. Spl repair/replacement of wornout cement fencingpost with anglepost and Provn of temporary shed for generatorat2 ASD (18 FAD)underGE (South)Pathankot

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/ loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Excavating in trenches, n.exc 1.5 m wide and exc 1.5 m but n.exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil complete all as specified and directed.

M&L for Cement concrete in foundations, filling and mass concrete type D-2 (1:4:8) using 40 mm graded stone aggregate) complete all as specified and directed.

M & L for reinforced cement concrete design mix M-25 using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, basement slabs etc complete all as specified and directed.

M & L for reinforced cement concrete design mix M-25 using 20mm graded crushed stone aggregate as in roof beams, cantilevers, bressummers, lintels complete all as specified and directed.

M & L for reinforced cement concrete design mix M-25 using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, square, rectangular or polygonal complete all as specified and directed.

M&L Formwork to sides of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces of concrete flat complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coat of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surface of walls complete all as specified and directed.

M&L for preparing the new plaster surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for Structural steel work as in Roof trusses (framed), trussed, purlins, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-w(Gde E-250) quality A complete all as specified and directed.

M&L for Mild Steel Plates (Plain or chequred) channels, square cut or notched (ordinary or counter sunk) forming holes with riveted, bolted or welded attachment complete all as specified and directed.

Preparation of new or previously untreated steel surface of any description, over 10cm in width or girth,not otherwise described applying two coat of synthetic enamel (ordinary tint) paint over one coat of red oxide primer complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridges to wall, fixed with self tapping screws (AS-3566 class-iii) complete . Sheet colour approved by Engineer- in -Charge complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridging to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material and labour 75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregate as in plinth protection in panels, joints filled with bitumen mastic including finishing the surfaces even and fair complete all as specified and directed

M & L for sand filling under floors or in foundations including watering, ramming and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block rubber moulded Lacquar finish any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

Returning and filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing of excavated material n.exc 50 m and deposited where directed at a level n .exc 1.5 m aove the starting point complete all as specified and directed.

M&L for Soil filling under floors or in foundations including spreading, levelling in layers n.exc 25 cm thick, well ramming including watering and consolidation complete all as specified and directed. (Note :- Soil bring from out side defence land)

Excavation in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and rammed earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good in any type of soil complete all as specified and as directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 incl one shop coat of zinc chromate primer paint incl prepration of steel surfaces complete all as specified and directed.

S&F Mild steel rag or lewis bolts/ screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised length of bolt exc 30 cm long 20 mm dia of neck complete all as specified and directed.

M&L chequered cement concrete coloured tiles of size 200mm x 200mm x 25 mm thick machine pressed set, jointed in neat slurry and pointed in grey cement mixed with pigment laid over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed.

M&L for mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long , 5 to 10 mm diameter of shank, complete all as specified and directed.

Supply only Chain link MS galvanised hot dip fencing of wire mesh size 50mmX50mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Dismantling of Galvanised steel barbed wire of any dia and any size with all fixing arrangements complete all as specified and directed.

S&F Galvanised hot dip 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each and treated with tar or coal tar black paint complete all as specified and directed.

Sch of Credit = 29200.00

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

Abrol construction co

M/S TARA CHAND CONSTRUCTION CO.

VIKRAM SINGH MANHAS

M/S Satpal and co.