Works Contract for Transportation,Insertion of poles, Replacement of damaged poles Erection of 33KV linesand dismantling of exs 33KV lines and allied works in 33KV Ranipet feeder from 110/33-11 Kaveripakkam SS under RDSS in Urben/Walaja section

Amount

Excavation and erection of metal supports above 9m/RSJ/Rail pole/Tubler pole with steel plate

Fixing of HT Tapping X arm / V Cross arms 3 1/2, 4 1/2 & 5 feet

Fixing of HT / LT TI Fitting

Fixing of HT Pin Insulators (11/33KV)

Fixing of HT 33 KV stain disc

Paving and stringing of conductors of sizes above Dog or other equivalent conductor /AB Cable (route length)

Provision of flat guarding with two numbers earth pits excludig stay set erection (with Guarding X Arm, GI Wire etc.,)

Transportation of all types and sizes of poles and other associated material from road side to pole pit and vice versa upto 0.50KM

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) for a lead upto 5KM

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) Above 5KM of lead of every KM

Transporting of Distribution Transformer / Line materials from Sub stores to office/ site upto 10KM distance by engaging 1 ton capacity Minidor(lorry)

Transporting of Distribution Transformer / Line materials from stores to office/ site above 10KM distance by engaging 1 ton capacity Minidor(lorry)

Loading/Unloading of metal Poles of all sizes

Loading of Conductor

Unloading of conductor

Loading/Unloading of line material

Dismandling of RCC, REC, PSC & Metal poles of all sizes including the closing of pit

Dismandling of conductor upto 7/3.35/AB Cable including Transporting the conductor to the nearest road side and stocking in coils

Earthing of poles with GI wires 4/ 6/8 SWG by coil earthing

Cement Concrete of ratio for individual poles shall be in the ratio of 1:2:4 (1 part Cement, 2 parts coarse sand and 4 parts 20mm aggregate stones chips)(material +labour) sleeve concreting of poles

Provision of muffing on RSJ Poles of 250mm dia X 12" size to prevent rain water entry

Numbering of each Poles with black letters in Yellow base by using stencils/skilled painters (including cost of paint per pole).The height of the lettering shall be 40mm for numbers and 50mm for alphabets.

Painting of metal pole with 2 or more coats of Red Oxide paint and 2 or more coats of Aluminium paint by either including cross arm per coat using his own brush(including cost of paint per pole)

Painting of all types of X arm and TI fitting with Aluminium Paint (including cost of paint)

Tree cutting

clamp alteration

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder