Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹32.5 L
EMD Value
₹64,980
Closing Date
22 Oct 2020, 6:00 pmClosed
Commissioner
Municipal Board Nathdwara
Providing and Fixing of street Road light in Temple Parikrama marg Nathdwara and dismentling of existing street light fixtures
2020_DLB_203061_1
Nit No. 15/20-21_Ntd_4381-85 date 14-10-2020
Open Tender
Electrical Works
Percentage
60 days
Nathdwara
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
COmm. M.B. Nathdwara and MD RISL Jaipur
₹64,980
Yes
23 Oct 2020
14 Oct 2020
23 Oct 2020
15 Oct 2020
22 Oct 2020
15 Oct 2020
Amount
Decorative gravity cast aluminium pole having cast aluminium base height(1160mm and minimum bottom square size 355mm) and Ribbed galvanised mild steel upper profile having dia 105mm with minimum 14nos groove on outer circle of ribbed pipe. Pole will be suitable for single arm bracket for mounting of Twin Nos. Street Light. Pole is having MS base plate 460x460x12mm at hole to hole 380mm. Fixture should be alligned on both arm at a min distance of 7000mm from the outer edge of POLE. Pole is having a service window at bottom comprising 4 way connector and MCB for Loop in in and loop out arrangement. Pole and bracket are properly machined and treated before epoxy primer coating and polyurethene painted in grephite grey italian capcicot colour. All Dimension are as per drawing. Pole Height 6000mm With single Arm Bracket
Decorative gravity cast aluminium pole having cast aluminium base height(1160mm and minimum bottom square size 355mm) and Ribbed galvanised mild steel upper profile having dia 105mm with minimum 14nos groove on outer circle of ribbed pipe. Pole will be suitable for single arm bracket for mounting of Twin Nos. Street Light. Pole is having MS base plate 460x460x12mm at hole to hole 380mm. Fixture should be alligned on both arm at a min distance of 7000mm from the outer edge of POLE. Pole is having a service window at bottom comprising 4 way connector and MCB for Loop in in and loop out arrangement. Pole and bracket are properly machined and treated before epoxy primer coating and polyurethene painted in grephite grey italian capcicot colour. All Dimension are as per drawing. Pole Height 6000mm With Twin Arm Bracket
Decorative gravity cast aluminium pole having cast aluminium base height(1160mm and minimum bottom square size 355mm) and Ribbed galvanised mild steel upper profile having dia 105mm with minimum 14nos groove on outer circle of ribbed pipe. Pole will be suitable for single arm bracket for mounting of Twin Nos. Street Light. Pole is having MS base plate 460x460x12mm at hole to hole 380mm. Fixture should be alligned on both arm at a min distance of 7000mm from the outer edge of POLE. Pole is having a service window at bottom comprising 4 way connector and MCB for Loop in in and loop out arrangement. Pole and bracket are properly machined and treated before epoxy primer coating and polyurethene painted in grephite grey italian capcicot colour. All Dimension are as per drawing. Pole Height 7000mm With single Arm Bracket
Decorative gravity cast aluminium pole having cast aluminium base height(1160mm and minimum bottom square size 355mm) and Ribbed galvanised mild steel upper profile having dia 105mm with minimum 14nos groove on outer circle of ribbed pipe. Pole will be suitable for single arm bracket for mounting of Twin Nos. Street Light. Pole is having MS base plate 460x460x12mm at hole to hole 380mm. Fixture should be alligned on both arm at a min distance of 7000mm from the outer edge of POLE. Pole is having a service window at bottom comprising 4 way connector and MCB for Loop in in and loop out arrangement. Pole and bracket are properly machined and treated before epoxy primer coating and polyurethene painted in grephite grey italian capcicot colour. All Dimension are as per drawing. Pole Height 7000mm With Twin Arm Bracket
Supplying and fixing Decorative Ornamental street light bracket suitable for wall mounting with 32 mm diameter with Inclination of 30 degree with varying length to suit the width of the street, Base plate with four holes for fixing the bracket with screw,nut and bolts. Bracket should be fabricated from combination of G.I. and aluminium and must have an appealing appearance keeping the heritage look of the Nathdara city in mind.Design of the bracket should be as per attached drawing and to be approved by Engineer Incharge before installation.
Supplying and fixing of Outdoor/ Indoor /Wall ountin Type junction box as per directions by Engineer-in-charge. having following specifications:-Degree of protection-IP66, Diemension - [ 255 X 205 X 112 ]mm The Junction Box shall be insulated and made out of Thermoplastic Polycarbonate.It must consist of 4 terminals for connection and should have provision for mounting 1 single pole MCB The Thermoplastic Polycarbonate JB shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid& anti corrosive. The JB shall be rated for Degree of Ingress Protection IP 66 in accordance with IEC 60529. The gasket material shall be Polyurethane and the gasket shall be internally embedded. The JBs shall be complies with requirements of the standards IEC 60998-1,IEC 60998-2-1, IEC 60670 –22 & IEC 60670 – 2-5. The manufacturer of Junction Box / Enclosure shall submit a copy of IEC Certificate.For better safety the Polycarbonate encl shall be fire retardant & self-extinguishing in accordance with IEC 60 695-2-11, DIN VDE 0304 Part 3, UL Subject 94 for Flammability V-2. It should be tested at Glow Wire test for 750 deg. Cent. The impact strength of polycarbonate enclosures / boards i.e. the Degree of Protection against Mechanical load shall be in accordance with EN 50298-98 for IK 07. Manufacturer should submit routine test certificate for JB.
S&F following sizes (dia.) of ISI marked 32 mm dia HDPE pipe PN 10 (class PE-80) along with accessories in surface / recessed / ground under 1 ft. depth for laying phase wire for wall mounted bracket from nearest cable pit using saddles, clamps, fastener as required including cutting the wall and making good the same as required.
Labour charges for dismentaling of exixting street light and reinstalling it including making all connections with accessaries and maintaining inventory list record on a daily basis as per directions by Engineer-in-charge.
Bidder Name
Amount
M/s RAMURAM HARSUKHRAM
siddharth engineers
M/S S.R. ELECTRICALS
TECH MARTZ PLUS
M/S S.R. ELECTRICALS
siddharth engineers
TECH MARTZ PLUS
siddharth engineers
M/S S.R. ELECTRICALS
M/s RAMURAM HARSUKHRAM
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .