Improvements and facelifting of Parade Road, Thimmaya Marg (Part), Srinagesh Garden and cremation ground at Uri enclave, Delhi Cantt.

"VIKSIT BHARAT" Thematic Art Installation & Structural Monument (Refer Figure-01 , Page 195 of the RFP): Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the "Viksit Bharat" vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. Minimum Dimensions: Length: 21 feet | Width: 2 feet | Height: 12 feet ( a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish.The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"SASHAKT BHARAT – monumental diamond-cut frame " Thematic Art Installation & Structural Monument (Refer Figure-02 , Page 196 of the RFP): Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the " SASHAKT BHARAT " vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. Minimum Dimensions: Length: 08 feet | Width: 2 feet | Height: 12 feet ( a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish.The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"INDIA'S RESCUE MISSIONS " Thematic Art Installation & Structural Monument (Refer Figure-03 , Page 196 of the RFP): ​Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the "" INDIA'S RESCUE MISSIONS " vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. ​Minimum Dimensions: Length: 12 feet | Width: 2 feet | Height: 10 feet (a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final ​surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish. ​The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"SENA KE SAATH JAN KA VISHWAS– mirror mosaic pavilion " Thematic Art Installation & Structural Monument (Refer Figure-04 , Page 197 of the RFP): ​Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the " SENA KE SAATH JAN KA VISHWAS " vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. ​Minimum Dimensions: Length: 08 feet | Width: 2 feet | Height: 12 feet (a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final ​surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish. ​The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"INDIA FOR PEACE-HUMANITY BEYOND BORDERS " Thematic Art Installation & Structural Monument (Refer Figure-05 , Page 198 of the RFP): ​Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the " INDIA FOR PEACE-HUMANITY BEYOND BORDERS " vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. ​Minimum Dimensions: Length: 26 feet | Width: 2 feet | Height: 11 feet (a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final ​surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish.​The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"RANN KE VEER-KHELO KE MAHAVEER " Thematic Art Installation & Structural Monument (Refer Figure-06, Page 198 of the RFP): ​Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the " RANN KE VEER-KHELO KE MAHAVEER" vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. ​Minimum Dimensions: Length: 20 feet | Width: 2 feet | Height: 10 feet (a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final ​surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish. ​The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"TIRANGE KI SHAAN- MANAVTA KA SAMMAN " Thematic Art Installation & Structural Monument (Refer Figure-07, Page 199 of the RFP): ​Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the " TIRANGE KI SHAAN- MANAVTA KA SAMMAN " vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. ​Minimum Dimensions: Length: 20 feet | Width: 2 feet | Height: 10 feet (a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final ​surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish. The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"JAY JAWAAN-JAY KISAAN" Thematic Art Installation & Structural Monument (Refer Figure-08, Page 199 of the RFP): ​Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the " JAY JAWAAN-JAY KISAAN " vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. ​Minimum Dimensions: Length: 08 feet | Width: 2 feet | Height: 12 feet (a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final ​surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish. ​The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"KAUSHAL SE SHAKTI-BHARAT KI PRAGTI " Thematic Art Installation & Structural Monument (Refer Figure-09, Page 200 of the RFP): ​Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the " KAUSHAL SE SHAKTI-BHARAT KI PRAGTI " vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. ​Minimum Dimensions: Length: 22 feet | Width: 2 feet | Height: 12 feet (a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final ​surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish. ​The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.

"EK BHARAT-SHRESTH BHARAT " Thematic Art Installation & Structural Monument (Refer Figure-10, Page 200 of the RFP): ​Design, fabrication, shop drawing preparation, supply, and installation of a monumental thematic sculpture/artwork depicting the " EK BHARAT-SHRESTH BHARAT" vision using structural mild steel sections, mild steel scrap, scrap metals, Industrial off-cuts and allied waste/recycled materials. ​Minimum Dimensions: Length: 20 feet | Width: 2 feet | Height: 10 feet (a variation of plus/minus 3% in length, width and height without any price adjustment is allowed, beyond 3% reduction will invite price adjustment on Pro-rata basis as per overall size requirements given in the item. No extra charges or amount shall be payable for enhanced size beyond given sizes). The bidder shall prepare and submit detailed shop drawings and thematic design mock-ups for prior approval by the Engineer-in-Charge before commencing fabrication. The work shall include complete foundation and structural support work, Excavation to required depth, disposal of surplus earth, provision of a solid brick masonry platform or structural retaining framework, and laying of 1:3:6 cement concrete foundation bed with M-25 grade PCC/RCC slabs as and where required for structural stability. The robust support base be finished with premium quality exterior-grade granite floor/cladding of approved colour and texture. The Structural framework shall be prepared using heavy-duty Mild Steel (MS) sections and artistic composition built from approved MS scrap and recycled metal components, capturing thematic motifs to include all letters, symbols, logos etc. Concealed internal metal support grids be provided for ensuring absolute rigidity and safety against high outdoor wind pressures. The 3D lettering, ornamental scrolls, and artistic details shall be hand-formed, welded, and sculpted using recycled mild steel waste, industrial scrap plates, off-cuts, and shaped re-bars. Internal support columns, base plates, and structural ribs shall be of structural steel sections (IS 2062, Grade E250 / IS structural tubes) of adequate thickness to ensure long-term stability. All structural welds joining the scrap elements must be meticulously ground, dressed, and blended to achieve a seamless, immaculate artistic contour without sharp burrs or slag irregularities. Final ​surface preparation shall be with thorough sandblasting or grit-blasting of the entire assembly to Sa 2.5 standard to remove mill scale, impurities, and surface oxidation. For Painting & Surface preparation use sand/shot blasting followed by application of anti-corrosive epoxy primer and multiple coats of premium exterior-grade polyurethane (PU) automotive paint of approved shades for long-lasting weather resistance and rich metallic patina finish. ​The scope of work shall include provisioning and installation of complete IP66-compliant exterior-grade lighting fixtures, including energy-efficient LED uplighters/downlighters and focused accent spotlights. Includes weather-proof electrical wiring in conduits, appropriate MCBs, control switchboards, and safe earthing connections. The scope shall also include supply and plantation of suitable plants/ horticulture works around the monument/base. The quoted rates shall Include all labour, machinery, scaffolding, materials, testing, cartage, and complete construction of the art work using appropriate waste/scrap materials finished on turnkey basis complete all as specified and directed by the Engineer in charge.