Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹2 L
Closing Date
29 Aug 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka State Road Transport Corporation
Rajeshwari MC
Renovation of KSRTC call center at Mysore Road Bus station, Bangalore for VTMS project
KSRTC/2025-26/BD/WORK_INDENT139
KSRTC/2025-26/BD/WORK_INDENT139
Open
Buildings
Two Tender Document System(Two Cover)
Karnataka State Road Transport Corporation Office Bengaluru
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To Qualify for award of this contract the Tenderer in his name should have, in the last five financial years (i.e. during the years i.e 2020-21, 2021-22 ,2022-23,2023-24 & 2024-25) achieved in at least two financial years a minimum financial turnover of Rs. 247.18 Lakh (in all classes of civil engineering construction scanned copy of audited profit loss statement of two financial years in which minimum financial turnover of Rs. Rs Rs. 247.18 LA is achieved. (Certified by Chartered Accountant along with Member ship/U D IN Number only.)Statement issued by others will not qualify for Eligibility.works only and
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tenderNote: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity (A X N x2.5) B) Where A Maximum value of Civil Engineering works, ( updated to financial year of the tender invited ), executed in any one year during the last five years. ( Completed as well as works in progress )B Value at price level ( updated to financial year of the tender invited ), of existing commitments and ongoing works to be completed during the next two years.N Number of years prescribed for completion of the work for which tender is invited2.5 Multiplying factor for assessing the available tender capacity for works costing upto Rs.100.00Lakhs. (Note:- the last five financial years (i.e. during the years i.e. , , 2020-21, 2021-22, 2022-23, 2023-24 & 2024-23 achieved in at least One financial years a minimum financial turnover of Rs. 23.73 Lakhs ) P & L Should be uploaded for calculating Bid capacity.The Bidder/Contractor must submit details of existing commitments and ongoing works to be completed in the prescribed format only (Annexure-B) FORM-B duly signedin case the Bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format ,duly signed.Details submitted in any other format or submission of document in which the Bidder himself has calculated the Bid capacity will not be considered.(Note:- Scanned copy of audited profit and loss statement of one financial years in which minimum financial turnover of Rs. 23.73lakhs is achieved. (Certified by Chartered Accountant or Tax Consultant along with Member ship or UDIN Number only.) Profit & loss Statement)
₹3,090
₹2 L
1 Aug 2025
1 Aug 2025
3 Sept 2025
12 Aug 2025
18 Aug 2025
Renavation of interior VTMS data center (CCS) at MCTC Busstation, KSRTC Bangalore.
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. (...
Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...
Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...
Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...
Providing and fixing both side polished granite slab and 20mm thick fired to wall in CM 1:3 edges of the slab are polished and etc., Complete as per Specifications (Rate As per VTMS Old Estimate Rate)
Interior and Work Station works : Providing and fixing acoustic Veneer paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall filled with 50mm thick 3...
Providing and fixing Veneer paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed over...
Providing and fixing in position glazed doors with 40mm board laminated on either side with 1mm laminate. The laminate profile is as per door design with specified colours. The glass of 6mm thicknes...
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling ...
Providing and laying of teak wooden polished flooring of 12mm thick high density timber of approved colour and design with end trims ,transition ,profiles ,beading.15mm thick felt and 20 micron polyes...
Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and ceiling, the partition shall be skinned ...
Providing and fixing STRAIGHT WORKSTATION consisting of back to back unit made out of 75 mm thick MS CRCA powder coated,tile based system for main sprine, Separator 25 mm tghick PLPB BSL wooden se...
FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing free Standing Table for Cabin - without frames consisting of 25mm thick PLPB table top, 25mm thick PLPB with edge bomded End table...
Providing and fixing meeting table consisting of 25mm thick PLPB table top edge bounded, 25 mm thick PLPB table topedge bounded,25 mm thick PLPB with edge bounded End table, 18 mm thick PLPB with edge...
Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCd powder coated, tile based system for main and return spine, top tile finish 8 kk thick MDF covered with Fa...
Storage Unit - wooden -One side laminate Providing and fixing woode storage unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and indivisual lo...
Mobile Pedestal unit - Wooden Providing and fixing 450mmw x 450mmd x 685mmht) Mobile pedestal unit - wooden with 18mm thick PLPB with edge bonded for body, Two equal drawer and filing drawer with ce...
Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and ceiling, the partition shall be skinned ...
Providing and laying of Rolling carpet -24 Once Selection of Colour and design as per the engineer incharge and architect.
Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor c...
Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run cap...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.P32of 105...
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...
Supplying & filling refrigerant (F-22/F/12) for air conditioning equipment's. Which includes the labour & Nitrogen gas for pressure and leak testing.P32 of 105/6.19
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ atteries.P32of105/6.22
Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. 300 mm Sweep P 30 of 105/6.5.1
Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete P 30 of 105/6.2
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.P 57 of 105/13.14
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified 1...
Do-Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Do-Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box.
Do-Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box.
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch P 9 of 105/3.6.1.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch P 9 of 105/3.6.3 6A Three Way socket P 9 of 105/3.6.3.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch P 9 of 105/3.6.12 RJ45/I.O Outlet Cat-6
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch P 9 of 105/3.6.9 32A DP Switch
Supplying & fixing miniature circuit breakers on existing MCB distrib ution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...
Supplying & fixing miniature circuit breakers on existing MCB distrib ution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...
Supplying & fixing miniature circuit breakers on existing MCB distrib ution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded luminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CR...
Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CR...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wi...
Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240Vat 50...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm.
Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all ccessories complete and Excluding batteries and wi...
Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries 120 AH capacity P38 of 105/9.5.8
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, ultistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch P 9 of 105/3.6.10 6/16A Universal Socket.
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and drawing UTP-CAT 6E LAN cable. P36 of 105/8.1.
Supplying & Fixing of switch mounting rack with power manager & Cable manager. 6U with 450mm depth P36 of 105/8.4.2.
Supplying fixing of Network Switches 24 port 10/100/1000 Switch P 36 of 105/8.9.10.
Supplying & Fixing of ... ms Cat 6 Patch Cable P37/105- 8.11.2 2 m.
Supplying & Fixing of ... ms Cat 6 Patch Cable P37/105- 8.11.3 3 m.
Supplying, installing, testing & commissioning approved make heavy duty (C') GI pipes and fittings confirming to IS 1239PI&II, Malleable Specials such as tees, long radius bends, check nuts, unions, f...
Supplying Installing, testing and commissioning of, pendent Type/Upright Type ,Standard Response Standard Coverage, Sprinkler, K5.6(80),1/2”NPT, 68 Degree C, Chrome finish, UL listed. P 90 of 105/15...
Stainless steel braided flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as re...
Supplying Installing, testing and commissioning of Ceiling Mounted powder coated Surface Finishing Mild Steel Rosette Plate including cost of materials, labour, usage charges of machinery complete as ...
Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diam...
Supply ,erection ,testing and commissioning of Fire Fighting panel cubicle type made out of 14/16Swg SCRC Asheet which is derusted, degreased, phosphated and passivated with g le iron skeleton or s...
Supplying Installing, testing and commissioning of Response Indictor constists of twin LED with electronic circuit work on 24 DC enclose in PVC retangular. complete including cost of materials, labour...
Supply, installation in position, testing and commissioning of Addressable Optical Smoke Detector radio-linked optical detector (smoke) operates with an optical sensing chamber based on the principle ...
2mmthickperforatedcableGItraywithonexistingMSanglesupportusing necessary GI bolts/nuts and washer or welding as required.
Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured cable P 92 of 105/15.105
Supplying, installing, testing and commissioning of Diesel Generator set with Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS1002...
Supply, Erection, testing and commissioning of AMF panel suitable for kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, alumin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ANNEXURE B.doc
Others - Annexure B • 0.03 MB
TENDER NOTIFICATION NO-07 VTMS MCTC.doc
Others - Tender notification • 0.93 MB
KW-4 VTMS MCTC.doc
Others - KW 4 • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .