Shifting and erection of 25 kva Substation, 3ph 3w 11 kv and 3ph 4w LT line due to Construction of HL Bridge over Chanagudi Nallah at 19/150 km on Kaintragarh Doruha Road for the year 2025-26.

MATERIALS FOR DP MOUNTED 25 kva DSS WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)-DP (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

9 Mtr. long 300 Kg. PSC Pole

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

LT Cable raising Channel(GI) 75x40x4.8 mm GI Channel(GI) (1000 mm long)(7.14Kg./Mtr., 3 No's.) (Each 3x1.000x7.14= 21.42 Kg)

Top Channel(GI) GI 100 X 50 X 6 MM (3000 mm long) (9.56Kg./Mtr, 2 No's.) (Each 2x3.000x9.56= 57.36 Kg)

Fish Plate(GI) 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280)

M.U Channel(GI) GI 75x40x4.8 mm (3000 mm long)(7.14Kg./Mtr., 2 No's.) (Each 2x3.000x7.14= 42.84 Kg)

AB Switch Mounting Channel(GI) 75x40x4.8 mm GI Channel(GI) (3000 mm long)(7.14Kg./Mtr., 2 No's.) (Each 2x3.000x7.14= 42.84 Kg)

AB Switch Side Support Channel(GI) 100X50X6mm,9.56 KG/Mtr., each Channel(GI) length 0.35 mtr., 2 no's Channel(GI) required =( 9.56x2x0.35)

Channel(GI) Support for down Pipe 75X40X 4.8mm., 7.14KG/Mtr., each Channel(GI) length 0.8 Mtr., 1 no's Channel(GI) required =( 7.14x0.8x1)

HG/ DO Fuse Mounting Channel(GI) 75x40x4.8 mm GI Channel(GI) (3000 mm long)(7.14Kg./Mtr., 2 No's.) (Each 2x3.000x7.14= 42.84 Kg)

Cantilever Support Channel(GI) 75x40x4.8 mm GI Channel(GI) (810 mm long,2 No's.) (7.14Kg./Mtr., 2 No's.) (Each 2x0.810x7.14= 11.57 Kg)

Cantilever Support Angle(GI) 50 X 50 X 6MM GI (1282 mm long) (4.5Kg./Mtr, 2 No's.) (Each 2x1.282x4.5= 11.54Kg)

Transformer Base GI Channel(GI) 100 X 50 X 6 MM (3000 mm long) (9.56Kg./Mtr, 2 No's.) (Each 2x3.000x9.56= 57.36 Kg)

Transformer Base Support GI Channel(GI) 100 X 50 X 6 MM (515 mm long) (9.56Kg./Mtr, 2 No's) (Each 2x0.515x9.56= 9.85Kg)

Transformer Belting Angle(GI) 50 X 50 X 6MM GI (3000 mm long)(4.5Kg./Mtr, 2 No's) (Each 2x3.0x4.5 Kg)

Transformer Belting Support Angle(GI) 50 X 50 X 6MM GI (580 mm long)(4.5Kg./Mtr,2 No's) (Each 2x0.580x4.5= Kg)

LTDB Mounting Angle(GI) 50 X 50 X 6MM GI (1000 mm long)(4.5Kg./Mtr, 2 No's) (Each 2x1x4.5 Kg)

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (2.5x7 mtr. For mesh formation, 12 Mtr. For LA and 2.5 mtr. For raising, 11 mtr for AB switch, 2.8 mtr for HG Fuse, 5x2 mtr. for DTR Nutral, (1.3+4.5) mtr. For DTR Body, 0.500 mtr for LTDB & AB Switch operating handle, 3 mtr. for Fencing) ( Each 65.6x 2.36= 154.81 Kg)

LT Distribution Box with MCCB, Aluminium Busbar of single Bay with kit kat fuse for 25 KVA S/S

55 SQ.MM. AAAC XLPE Covered Conductor

4 Cx 35 mm2 LT XLPE Cable(Armoured) - FOR 25 KVA Trf.

4 Cx 35 mm2 LT XLPE Cable(Armoured) - From LTDB to PSC Pole

AB Switch(11KV,200A.3pole,50Hz)

H.G.Fuse( 11KV.200A.3Pole)

WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR

POLYCARBONATE BIRD GUARD

Disc insulator (B&S)70 KN polymer

H W fitting (B&S)70KN(3bolted)

Lightning Arrester(12KV,10KA) Station Class 2

11KV pin insulator polymer

HT stay set complete

HT stay Clamp (1.9Kg/pair)

HT stay insulator TYPE-C

7/10 SWG GI stay wire, Grade -2 (15Kg./ Set)

40 mm Nominal bore GI pipe (medium gauge) earthing device with 3 mtr .Long

GI Nuts & Bolts of Assorted size (25 Kg/ DSS DP)

GI Barbed wire/Anticlimbing device (3Kg /Pole)

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 8 no's = (8x0.59x0.510)

Danger plate 11kv

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 2 no's = (2x0.59x0.510)

Name plate

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Black Colour Paint(GIS Numbering & Zebra Stripping) for numbering

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.450Cu.mtr(Per Pole) (For WPB Pole)

Couping ratio 1:1.5:3(M-20 Grade) (500mmX500mmX450mm) = 0.113Cu.mtr(Per Pole)

PCC ratio 1:3:6(M-10 Grade) For DSS Area (5X3X0.1)= 1.5 Cu. mtr.

Fixing of stay set with 0.5Cum cement concrete foundation 1:3:6(M-10 Grade) size ( 900mmx600mmx900mm) using 40mm BHG metal with all labor and material except stay set , stay wire , stay insulator .

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Laying of 4 Cx 35 mm2 LT XLPE Cable

SITC and Erection of GI Fencing with Gate

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole) (For PSC Pole)

Supply of AL Lugs suitable for 35 sq mm cable/conductor, Crimping with cable and Fixing/connecting include supply and erection of PVC Tape as per voltage requirement.

Supply and erection of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 16-35sqmm including making hole in Base plate and dressing of cable along with vermin proofing properly .Supply to be done as per TPCODL Spec and approved make dowells.

Inspection fee of Transformer upto 100 KVA

MATERIALS FOR 11 KV Pin Points With WPB WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.) (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

11 KV V cross Arm(GI) (10.2 K.g. each )

Top bracket 100x50X6 mm GI Channel(GI) (2kg each)

Danger Plate, 1 no's. for each pole

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

11 KV pin insulator polymer, 3 Nos. required for each support

Earthing of Support ( Coil Type )

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

GI Nut , Bolt & Washer of different sizes (1.45 Kg/ Pin Point)

55 sq.mm AAA conductor

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

NON METALLIC TIES -11KV 55SQMM CVRD AAAC

Spike (GI ) (using 50x6mm Flat(GI) welded with 8 mm square bar) ( 2 Nos of spike per Set in each Pole )

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.45Cu.mtr(Per Pole)

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole)

MATERIALS FOR LT AB Cable Line WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.) (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

LT Accessories with Eye hook and Clamp Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

Suspension Clamp with EYE hook for ABC

4C×35 mm² (P)+1C×35 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable)

Insulated piercing connector.Type-B-main 25 to 150 sq.mm & Tap-6 to 35 sq.mm

GI Pipe Earthing (each 5th pole to earth)

Coil Earthing

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

Danger plate (LT)

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

GI Nut , Bolt & Washer of different sizes (0.5 Kg/ Pole)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole)

Couping ratio 1:1.5:3(M-20 Grade) with dimension ( 500X500X450)= 0.1125 Cu mtr(Per Pole)

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Dismantling Dismantling of 9/8 Mtr. PCC/Joist Pole

Dismantling / Removal of V Cross arm from pole

Dismantling of 11kV Pin Insulator with Pin

Dismantling of 11kV Disc Insulator with Hardware

Dismantling / Removal of MS Channel. from Double Pole Structure /pole

Dismantling of existing 11/0.4kV, 33/0.4KV, Three Phase Distribution Transformer 25KVA including removal of HT/LT leads, earth connections and unloading by crane if required.