SPECIAL REPAIRS TO BUILDING NO 21 AND 22 AT BOLTON ROAD AND CAW AREA UNDER GE AIR FORCE HAKIMPET

Amount

SCHEDULE 'A' PART - I B/R PORTION :- Dismantling floor/wall tiling including cement mortor bedding (but not backing) removing of unserveable tiles from site and rubbish of the premises complete all as specified and as directed.

Demolition of plain cement cement concrete/terrazo tiles with cement mortor bedding in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Plain Cement concrete 1:2:4 type B-1mix (using 20 mm graded stone aggregate) 25 mm thick as in floors etc complete all as specified and as directed.

M&L for 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish complete all as specified and as directed.

M&L for Double charged Vitrified Ceramic tiles 10 mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc. set and jointed in cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Description all as per Ser item No.5 here-in-before but as in vertical surface such as skirting etc. to match with the flooring complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free complete all as specified and as directed.

Description all as per Ser item No.7 here-in-before but as in vertical surface such as skirting etc. to match with the flooring complete all as specified and as directed.

M&L for colourd non skid ceramic tiles 300 mm X 300 mm X 7 to 8 mm thick (Square/ rectangular) area of each tiles exc 0.06 Sqm but not.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set with grey pigment and cement , jointed and pointed in neat cement slurry as in floors laid over 15 mm thick 1:6 screed bed complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling as in skirting / dado complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles as in vertical surface 350 mm x 250 mm x 7 mm or 450 mm X 350 mm X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Cement concrete tiles 25 cm x 25 cm x 22 mm thick,machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polishedset jointed and pointed with grey cement and no pigment in neat cement slurry in floors complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and bee wax polishing complete all as specified and as directed.

M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed complete all as specified and as directed.

Demolition of RCC Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate ) for manhole cover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed.

M&L fot TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed complete all as specified and as directed.

M & L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. mirror polishing and edge rounded all as per specified for steps complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M & L for Plain Cement concrete 1:3:6 type C-1 mix using 20 mm graded crushed stone aggregates 75 mm thick as in plinth protection, hard standing, sub base, floor finish etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick plastering in CM 1:3 on fair faces of brick work or concrete surface as in ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surface of wall and applying 2 mm thick putty finish to obtain smooth finish wall surface and applying two coat of distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing new plastered surface of ceiling and applying 2 mm thick putty finish to obtain smooth finish in ceiling surface and applying two coat of distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing new plastered surface of wall surface and applying two coats of cement based paint a coat of alkali resistant primer complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coats of distemper over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment of ceiling and applying 2mm thick putty finish to obtain smooth finish ceiling surface and applying two coats of distemper over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coat of cement based paint over a coat of primer complete all as specified and as directed.

M&L for preparing old plastered surface of walls and applying two coats of white wash complete all as specified and as directed.

M&L for preparing old plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old decorated wall surfaces and applying two of exterior emulsion weather coat,complete all as specified and directed.Make: ’Apex weather proof exterior emulsion XP' or equivalent in Asian make as approved by GE complete all as specified and as directed.

M&L for Flush / raised pointing in CM 1:4 to squared rubble masonry, coursed complete all as specified and as directed.

Demolition of brick work built in CM including All Quions, arches, pillars etc complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) as in manhole etc complete all as specified and as directed.

M&L for Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removing to store 15 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removing to store 20 mm bore complete all as specified and as directed.

S&F tubes medium grade galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors 15 mm bore complete all as specified and as directed.

S&F tubes medium grade galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors 20 mm bore complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repair Gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and as directed.

Dismantling water tank of capacity exc 500 & n.exc 1000 ltrs complete all as specified and as directed.

S&F 1000 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Dismantling water tank of capacity exc 250 & n.exc 500 ltrs complete all as specified and as directed.

S&F 500 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed 20 mm bore (Minimum weight 455 gms) complete all as specified and as directed.

Demolition and breaking up of AC / PVC drain pipes 100 mm dia set in CM complete all as specified and as directed.

Demolition and breaking up of AC / PVC drain pipes 75 mm dia set in CM complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 150 mm X150 mm Salt-glazed stone ware gully traps, square, or round mouthed, type 'P' complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) bends any radiuis complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) bends with access door any radiuis complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) bends any radiuis complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) bends with access door any radiuis complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) junction single, (single T) complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) junction single, (single T) with access door complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) junction single, (single T) complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) junction single, (single T) with access door complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pedestral pan white/ coloured, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repairs vitreous china squating pan orrissa pattern size 580 x 440 mm white with integral foot rest , including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, , closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repairs vitreous china wash basins, white, flat back, size 550 mm X 400 mm including brackets, waste fittings, brass, chromium plated 32 mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, pillar tap, casr copper alloy, chromium plated fancy type screwed type high pressure, with long screwed shanks and fly-nuts, PVC waste pipe of 32 mm bore 75 cm long, complete all as specified and as directed.

S&F in repairs stainless Steel sink with drainage board made of stainless steel 1.0 mm thick kichen with plugs washers and wastes, including fixing cantilever brackets and connecting union to pipe over all size 915 mm X 460 mm with bowl size 410 mm X 330mm X 160mm including PVC waste pipe of 38 mm bore and 75 cm long complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including PVC waste pipe of 38 mm bore and 75 cm long complete all as specified and as directed.

S & F stainless steel plate rack of size 900 mm x 1200 mm rectangular, 1mm thick including provision of wooden gutties complete all as specified and as directed. Make :- Deep / Anjali

S&F Chromium plated wall mixer 3-in-1 system with provision of for both hand shower & over head shower complete with 115mm long bend pipe on upper side, connecting legs & flanges (without hand and overhead shower) complete all as specified and as directed. Make :- Jaquar Code No CQT-23273UPR or equivalent approved make

S&F in repairs CP Angular stop cock 15 mm complete all as specified and as directed. Make :- Jaquar Cat No :CQT-CHR-23053 or equivalent approved make.

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and as directed.

S&F in repairs Chromium plated two way bib cock with flanges.complete all as specified and as directed. Make :- :Jaguar Cat No DRC-CHR-37041 or equivalent approved make.

S&F in repair for 15 mm bore chromium plated bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs Tubular towel rail, 20 mm dia, "D" type, 60 cm long between flanges complete all as specified and as directed.

S&F in repairs Soap dish holder complete all as specified and as directed. Make :- Jaquar cat No AKP-CHR-35731 or equivalent approved make.

S&F chromium plated heavy duty coat hook having 2 nos of hooks Make :- Jaquor Cat No 35761 or equivalent approved make fixed the existing door with necessary screws etc complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F cornner glass shelf of size 9" x 9" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and as directed. Make :- Jaquor Cat No ACR 1173 or equivalent approved make.

S&F in repairs Brass chromium plated shower rose 125 mm sizecomplete all as specified and as directed.

S&F in repairs PVC wall cabinet 320 mm X 350 mm X 270 mm with single door fixed to wall complete all as specified and as directed.Cat No: SSMPL-04 of SEAGULL or equivalent as approved by GE.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

M&L for Welding in repairs exc 2.5 cm but not exc 5 cm in length thickness of metal to be welded Exc. 6 mm but not.exc 9 mm steel door and making good complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B-0 mix using 12.5 mm graded stone aggregate as in terrace including water proofing compound finished even surface complete all as specified and directed. Note: Paid and Measured water proofing compound seperately complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of plain cement concrete of any description in any position as in padding concrete, sunken slabs coping, benching, kerbs or mud stops etc complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement but excluding the cost of WPC ( water proofing compound should be measured and paid seperately) complete all as specified and as directed.

M&L for cleaning the roof surface and applying oil bond bitumen primer @ 0.20 kg/sqm providing and laying 4 mm thick APP modified water proofing membrane weight not less than 4 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800/N/sqm cum tearing strength 180N with minimum of 10 cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2 kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed.

Supply Only integral water proofing compound as per manufactures instruction.complete all as specified and as directed.

S&F in repairs for 25 mm dia Stainless Steel Curtain Rod fancy type complete all as specified and as directed.

S&F in repairs for Brackets, Ends Cap and Holder suitable for 25 mm dia Stainless Steel Curtain Rod complete all as specified and as directed.

S&F in repairs Sheet glass, ordinary quality 3 mm thick and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 1st class hard wood beads, straight (any size) for glazed or guaged joinery, renewed, including mitres etc. and removing old beads complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stain less steel wire staples complete all as specified and as directed.

Taking down chowkats with shutter ( without taking off shutters from the frame) exc 1.5 Sqm but not exc. 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and not .exc 2 sqm each complete all as specified and as directed.

S&F for Pressed steel frames (size 125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and as directed.

S&F Pressed steel frames (size 105 mm x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 mix (using 20 mm graded stone aggregate) as in filling for pressed steel frames ,cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

S&F 35 mm thick flush shhutters solid core construction with black board core and ply wood face panels commercial type on both sides both face is covered with decorative face veneer with lipping / frame to match complete all as specified and as directed.

S & F for 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stain less steel wire staples complete all as specified and as directed.

Taking down chowkats with shutter ( without taking off shutters from the frame) not .exc 1.5 Sqm each including steel windows and ventilators complete all as specified and as directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm),sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories) complete all as specified and as directed. Area not exceeding 2.00 sqm each

S&F Sheet glass, ordinary quality 4.8 mm thick and glazing with rubber to UPVC frame in square/rectangle exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Steel ventilators with top hung shutters including hinges, steel peg stay etc. complete all as specifed and as directed.

S&F 3.0 mm thick sheet glass ordinary quality frosted fixing with putty in squre not .exc 0.5 sqm in each pane complete all as specified and as directed.

S&F MS hold fasts cut to length bent to shape as required drilling holes and fixing with MS screws etc complete all as specified and as directed.

S & F in repairs Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S & F in repairs Solid PVC Door Frame of size 50 mm X 47 mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S & F in repairs Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as specified and as directed.

S&F 100 mm long MS butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long extruided aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hartd drawn steel spring, fixed in floor complete all as specified and as directed.

S&F Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and as directed.

Dismantling of wall boards (fibre, Pulp, insulation, plywood etc.) as in cup boards, shelve, pelmet boxes etc. complete all as specified and as directed.

S&F in repairs 1st class hard wood plain fillets rectangular exc. 3 and not .exc 6 sqcm wrought fixed with screws complete all as specified and as directed.

M&L for 25 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work (Greenply or equivalent ) complete all as specified and as directed.

M&L for 18 / 19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work (Greenply or equivalent )complete all as specified and as directed.

S&F 100 mm Rim latch with two levers, of aluminium alloy body, with brass knob or lever handle and fixed complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised complete all as specified and as directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised 75mm size complete all as specified and as directed.

M&L for antitermite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L antitermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Removing building materials etc upto a distance of 6 Km including loading, unloading at the destination complete all as specified and as directed.

SCHEDULE 'A' PART - II E/M PORTION :- Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed.

Taking down unserviceable MCB DBs, Metal clad DBs along with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed.

Taking down unserviceable Security light of any description including service bracket, clamps nut bolts etc complete all as specified and as directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc complete all as specified and as directed for the following :-

(a) One light point controlled by one one way switch .

(b) One light point controlled by one two way switch .

(c) One ceiling fan point controlled by one one way switch.

(d) One Exhaust fan point controlled by one one way switch.

(e) One 3 pin socket outlet 5 Amps on the same board with other switches.

(f) One 3 pin socket outlet 5 Amps on the Independent board.

(g) One bell/buzzer point controlled by one push button on the same board with other switches or independent.

Description all as per item No.139 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

M&L for Modular switch 6A, 1 way complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

M&L for Modular switch 6A, 2 way complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

M&L for Modular switch 16A, 1 way complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

M&L for Socket outlet 6A modular complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

M&L for Socket outlet 16A modular complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

M&L for switch bell push modular complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

M&L for Stepped type fan regulator(4steps), 120 W-2 modular complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

S&F Electric bell/ buzzer 230 volts, single pole, 240 V complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

S&F ceiling rose, 3 terminal, PVC / Polycarbonate isolated body complete all as specified and as directed. Make :- Anchor/ Havells/ Legrand/ Crabtree

M&L for Lamp holder PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

M&L for Modular Telephone socket complete all as specified and as directed. Make :- Anchor/ Havells/ Legrand/ Crabtree

M&L for Modular TV socket. complete all as specified and as directed. Make :- Anchor/ Havells/ Legrand/ Crabtree

M&L for Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn through and including non metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finishing to match with the sorroundings) and including provision of 1.5 sqmm PVC insulated FRLS copper cable as earth continuity conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches / sockets/ regulators etc. complete all as specified and as directed for the following :-

(a) One light point controlled by one way switch .

(b) One ceiling fan point controlled by one way switch.

(d) One 3 pin socket outlet 5 Amps on the same board with other switches.

(e) One 3 pin socket outlet 5 Amps on the Independent board.

S&F Switch piano flush type 5 / 6 Amps single pole one way 230 Volts complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree.

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volts complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

S&F Stepped type electronic fan regulator flush type on laminated sheet for 1200 mm sweep fans complete all as specified and as directed. Make :- Anchor / Havells / Legrand / Crabtree

M&L for rigid non- metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of size 20 mm dia for Tele & TV points. complete all as specified and as directed.

S & F in repairs, wall mounted 10W, 6K,LED light fitting 2' with all in one fixture extruded aluminium heat sink provided for efficient heat dissipation & intergrated electronic driver, internally pre-wired including two Nos PVC blocks and connecting up with twin core twisted flexible copper conductor cable of suitable size upto ceiling rose including taking down old one. complete all as specified and as directed. Make :- Havells, Model: LUMILINEBS10WLED865SPCWH or equivalent in Philips / Crompton Greaves

S & F in repairs, wall mounted 22W, 6K,LED light fitting 4' ultra slim with extruded aluminium, heat sink provided for efficient heat dissipation & intergrated electronic driver, internally pre-wired including two Nos PVC blocks and connecting up with twin core twisted flexible copper conductor cable of suitable size upto ceiling rose including taking down old one. complete all as specified and as directed. Make :- Havells, Model : LUMILINEBS22WLED865SPCWH or equivalent in Philips /Crompton Greaves

M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan complete all as specified and as directed.

Dismantle the unserviceable rubber bush with clamping set, supply and fix rubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Including taking down existing water heater and deposit to E/M Store. complete all as specified and as directed. Make :- Venus or equivalent in Havells / Crompton Greaves

M&L for Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. complete all as specified and as directed. NOTE : - Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Description all as per item No. 163 above but with 2 x4.0 Sqmm + 1x4 Sqmm complete all as specified and as directed. . NOTE :- Two runs of 4.0 sqmm cable conductor, one run of 4.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Description all as per item No. 163 above but with 2x1.5 Sqmm + 1x1.5 Sqmm complete all as specified and as directed. NOTE :- Two runs of 1.5 sqmm cable conductor, one run of 1.5 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Descrption all as per item No. 163 above but with 4 x10.0 Sqmm + 2 x 10.0 Sqmm complete all as specified and as directed . NOTE :- Four runs of 10.0 sqmm cable conductor, two runs of 10.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

M&L for Providing suitable hole in stone masonary or any type of wall for Exhaust fan of 300 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall complete all as specified and as directed.

Supply and fix MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete including taking down existing DB sheet metal including MCB complete all as specified and as directed including taking down. Make :- Havells / Legrand / Schneider

S & F for sheet metal enclosure for vertical distribution board when MCCB for in coming and MCBs for out going to be used VTPN 4 way , 415 volts double door complete all as specified and as directed. . Note :- MCCB and MCB will be measured and paid separately under relevant items.

S&F MCB distribution board double door type, SPN 12 way sheet steel powder painted with bus bar neutral link earth bar etc complete all as specified and as directed. Make :- Havells / Legrand / Schneider

S&F MCB distribution board double door type, SPN 4 way sheet steel powder painted with bus bar neutral link earth bar etc complete all as specified and as directed. Make :- Havells / Legrand / Schneider

Supply & fixed MCCB 3 pole, 415V, fixed type, 63 Amps with breaking capacity 16 KA complete all as specified and as directed. Make :-Havells / Legrand / Schneider

Supply & fix, MCB SPN 40 Amps, 240 volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed. Make :- Havells/Legrand/Schneider

Supply & fix MCB SP 5 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed. Make :- Havells / Legrand / Schneider

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistent complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make :- Havells or equivalent in Philips / Crompton Greaves

M&L for Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected to & including the galvanized iron trip 25 x 4mm by (upto 7.5m) welding and brought upto 1.0m above plinth protection, including proviion of suitable ize of light grade GI pipe for protection of galvanized iron trip up to plinth and further connecting with GI wire to distribution board, including excavation, earth work, Charcoal & salt , 30cms layer of two parts of bentonite mixed with one part BC/loomy/garden soil and four parts of water all around the charcoal, salt mixture all as directed , PCC chamber, RCC cover slab, watering pipe 20 mm dia bore med. grade, wire net, funnel etc. & testing on completion all, as specified in plate No.3 of ssr Pt, including taking down exisiting earthing. complete all as specified and as directed.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to wall or any other indicated situation for loop earthing etc. as required 25 mm x 4 mm dia galvanised iron or steel wire,including taking down complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 m sweep with, blades, and frame and louvers ,connecting wire and all accessories including taking down Existing exhaust fan and deposit to E&M store complete all as specified and as directed. Make :- Havells or equivalent in Anchor / Usha.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter or fix using ply board, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm or nearest sweep . complete all as specified and as directed. Make :- Havells or equivalent in Anchor / Usha.

Saiansh Associates

UNITED TECHNO PROJECTS PVT LTD

M/s Amit Associates

PAVAN ENTERPRISES

GNV Engg Services

SRI LAKSHMI VENKATESHWARA INFRATECH

PAVANI INFRAS

STANDARD AGENCIES

G K CONSTRUCTIONS

P SRINIVASA RAO

Jack Electrolinks Private Limited