REPAIRS/REPLACEMENT TO WOODEN, STEEL AND ALUMINIUM

Amount

Taking down chowkhats or frames with shutters n. exc. exceeding 1.5 Sq.m Each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 Sq.m and not exc. 4 Sq. m Each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description n. exc. 1.00sqm each.

Taking down shutters of any description exc. 1.00sqm and n.exc.2.00sqm each

S&F for Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,

S&F for Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,

S & F 35 mm thick, Factory made second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and tred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); complete all as specified and as directed

S & F 30 mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, decorative faces on both sides veneered with lipping alround to match complete all as specified and as directed .

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) Supply only 4 mm thick sheet glass and stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose.

S&F for Anodised aluminium powder coated frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated Aluminium section for door shutters aluminium section weighing not less than 0.88 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etx complete all as specified

S&F Anodised Aluminium powder coated windows sliding windows frame section weighing not less than 0.980kg/m sliding type (Three track frame) with jointing cleat, beadings etc. for fixing of aluminium anodised skelton windows & shutter section weighing not less than 0.55kg/m fixed with glass or gauge, without sash bars using standard aluminium section incl necessary jointing cleats, glazing clip, rubber packing, anodised aluminium snap, beading screws, anodised aluminium fittings such as handles, locks, stainless steel adjustable friction stay hinges etc complete all as directed by Engineer-in-Charge. Note :- However unit rate includes cost of rubber beading, fitting such as handles, SS friction stay hinges and fixing of glass/ S S wire mesh etc.

S&F Anodised Aluminium powder coated Ventilators with frames section weighing not less than 0.980kg/m suitable for top portion with fixed wire mesh and louvers with glazing, bottom portion with fixed glass (Pinhead glass) incl jointing cleat for fixing glass, wire mesh etc incl necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap-beadings, screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc as required complete all as directed by Engineer-in-Charge. NOTE:- However unit rate includes cost of rubber beading, fitting such as handle, SS friction stay hinges and fixing of glass/SS wire mesh etc.

S&F Aluminium powder coated grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standared section and fixed to the existing window frame with CP brass /stainless steel screws @ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all comnplete as per requirement and direction .

Supply only 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Supply only 3.00 mm thick figured glass pin head type obscured or frosted on one side and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

Supply only Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Door closer hydraulically regulated, designation No. 2,universal type, Aluminium (extruded section body) suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in openings all as specified .

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all specified and as directed.

S&F in repairs 18 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work all as specified and as directed

Supply and fixing in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

Supply and fixing 100 mm long butt hinges, extruded aluminiun alloy with galvanised mild steel himges, anodised and fixed.

Supply and fixing 100 mm long butt hinges, medium weight cold rold mild steel and fixed.

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 200 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 100mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply and fixing 150mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified

S & F Floor door of stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

S&F in repairs piano hinges and Supply and fixing Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (40 mm width of flaps when open ) all as specified and as directed

S & F in repairs helical spring Mild steel helical spring, 375 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed .

S & F in repairs door closer aluminium Door closer , aluminium die cast body , hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed .

Material and labour for Welding in repairs not exc 2.5 cm in length , thickness of Metal to be welded not exc. 6 mm complete all as specified and as directed.

Material and labour for Hacking out old broken glass (any thickness, size, quality or description) from metal frame exc 1.5 Sq.m, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed

Supply and fixing 4.8 mm thick sheet glass, ordinary quality fixed with PVC / neoprene gasket , angular glazing aluminium beads, rubber packing and glazing in squares exc 0.5 sq m Each pane for sliding rack with sliding handle all as specified and as directed

Supply and fixing 4 mm figured glass, pin headed type, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed

Supply and fixing 4 mm sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq m Each pane all as specified and as directed

Cutting holes into or through stone / brick walls, Superficial area not exc. 150 sq. cm, built in cement mortar 1:3 and making good or cement concrete 1:2:4 type B-l as required complete all as specified and as directed .

Material and labour for providing cement concrete 1:3:6, type C1, using 20 mm graded stone aggregates as in bed blocks for fixing hold fasts in fixing of MS door frames etc., complete all as specified and as directed .

Supply and fixing Second class Hard wood plain fillets, exc 3 Sq cm and not exc 6 Sq cm area, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete, as specified and as directed

S&F in repairs gear operated Steel rolling shutters, having interlocking arrangement of MS sheet laths made out of 1.25 mm thick with ball bearing, as specified including top cover, anchoring rod, hasp and staple guide channel and one shop coat of primer; erected in position as indicated, complete; push & pull or manual type complete fixed as in repair all as specified in SSR 2009 (Part-I) and as directed.

Dismantling boarding, anydescription, fixed in any position with screws.

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as pspecified and directed.

M&L for Aluminium snap grid of size 605 x 605mm frame work for false ceiling as specified and 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to GI //Aluminium frame work in ceiling including two coat of oil bound distemper ver a coat of primer , GI suspenders of 3mm thick GI wire and level adjusters all complete and incl. cost of making opening for light fittimngs diffusers. cut out to be required line and shape as per manufactures recommendations at any height complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete

M & L for rendering 15mm thick in cement mortar (1:4) on brick and concrete surfaces finished even and smooth without using extra cement

M&L for two coats of oil bound distemper over one coat of Priming with alkali resistan priming paint on newly plastered wall surfaces including preparation all as specified and as directed.

Material and labour for preparing surfaces of old steel and iron surfaces, not otherwise described, over 10cm width or girth and applying one coat of aluminium paint, complete all as specified and as directed .

Material and labour for preparing surfaces of steel and iron surfaces, new or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

Material and labour for preparing surfaces of wooden surfaces, new or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thickness (below or above ground).

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection finishing surface even and fair including. making of groove as specified and directed.

Demolition of cement concrete (reinforced)(other than ground floors), staircases, landing,chajjas and similar suspended work.(Note: Height of the building varies from 3m to 10m from GL)

M&L for Reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in slab supported on wall, beam ,roofs, landing, chajja, shelves etc all as specified and as directed.

M&L for mild steel bars 10 mm dia and over TMT bar, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed.

M & L formwork to sides and soffits ofchajjas, lintels for flat fair finished surfaces of concrete all as specified and as directed.

M & L for Formwork to soffits of suspended slabs such as lintels,chajjas and similar work , with supports and fair finished surfaces of concrete

M & L for Providing, cement concrete type B1 1:2:4 (12.5mm graded concrete) in lintels/chajjas upto 1.5m clear span, cills, steps; including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as directed.

Demolition of cement concrete/ removal of waterproofing membrane/ roof tiles (unreinforced)(other than ground floors),roofs and similar suspended work.(Note: Height of the building varies from 3m to 10m from GL)

Roughening surfaces of old concrete/brick floor by picking, sweeping clean and washing down with water to remove dust, etc. & brushing neat cement slurry with 3.0kg of cement per sq. metre all as specified and directed.

M&L for Rendering 10mm thick on fair face of concrete surfaces in CM 1:3 with WPC as specified finishing even and smooth with out using extre cement.

Supply only integral water proofing compound all as specified.

M&L for labour for preparation of surface by removing dust, dirt and applying oil bound bitumen primer @0.20 Kg / sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0Kg/sqm reinforced with non woven polyester matt weighing not less than160gm/sqm having softening point not less than 150̊ degree centigrade, having tensile strength of 650N/sqcm and 350N/sqcm in longitudinal and transverse directions respectively of the reinforcement tearing strength of180N by torch application with minium 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumin 90/15 over the membrane @ 1.2Kg/sqm and on drying apply a coat of solar reflective bituminous aluminium paint over membrane @ 0.1kg/sqm all as specified and directed.

Taking up or down 25mm bore steel tubing and connection including cleaning for refixing all as specified and as directed

Disconnection exisiting PVC water tanks of 500 liters to 1000 liters capacity setting aside or lowering for carrying out roof repairs etc, includingn cleaning and removal of all scale, dirt etc from tanks and from mouths of circulating pipes, hoisting the tanks reconnecting and refixing in position, all as specified and as directed

Dismantling Asbestos cement/ GI Galvalume (corrugated,semicorrugated, etc.) sheets in roof coverings

Dismantling wrought iron or mild steel work of any description not otherwise provided for in roof.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F for Pre- painted galvalume aluminum zinc coating AZ 150 GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for 4mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. fixed with L-type or J-type or cranked hook bolt .

S&F in repairs160 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps,complete all as specified and directed.

S & F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where onnected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

Dismantling of Stone slabs and tiles of any description or thickness laid dry in floors, aprons etc.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded agg) of 75mm thick as in sub base

M&L for Heavy duty coloured Chequered cement concrete tiles 30cm x30cm x 25 to 30mm thick,laquered finish type set, jointed and pointed in neat cement slurry with gray cement pigment cement ang pigments. in floors

M&L for 20mm thick cement screed base bedding layer of mortar 1:4 for laying floor finishedall as specified

M&L for coloured Machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M & L for sand filling as in pathway in layers n. exc 30cm thick each, including watering and consolidation as directed

M&L for Cement concrete 1:5:10 type E-2 (using 40mm graded agg) as in sub base to pavings complete all as specified and as directed..

M&L for Cement concrete 1:2:4 type B-2 (using 40mm graded agg) of 100mm thick finished even and smooth with out using extra cement incl. spike rolling to surface or making impressions of expanded metal, while the concrete is green.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as directed.

Removing by cutting/up rooting plant/tree under surface of wall/celling/roof including pouring of acid on the place and making good the damage portion with cement mortar 1:3 or concrete 1:2:4 type B1 using 20 mm graded aggregate complete and removing of material retrived from above work to outside of MoD landall as specified and as directed (Note: Height of bldg is upto 3m)

Removing by cutting/up rooting plant/tree under surface of wall/celling including making good the damage portion with cement mortar 1:3 or concrete 1:2:4 type B1 using 20 mm graded aggregate complete all as specified and as directed(Note: Height of bldg is from 3m to 10m from GL)

M&L for Pre-cast cement concrete block masonry type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc.10cm in width and setting in mortar complete in CM 1:6 all as specified and directed.

M&L Rendering 15mm thick on fair faces of concrete surface in cement mortar 1:4 finished even and fair without using extra cement all as specified & directed.

M&L two coat of cement based paint on undecorated wall surfaces including preparation of new plastered surfaces all as specified and directed.

M&L for preperation of new steel surfaces girth exc. 10cm and apply two coat of synthetic enamel paint over a coat of zinc oxide primer.

Dismatling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L 25 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate in floor all as specified and directed.

M & L for Joint free Non - skid colored Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry 15mm thk cement screed base laid in mortar 1:4 and pointed in white or coloured cement to match all as specified

M & L for Joint free Non - skid colored Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces such as skirtings, dados and risers to steps etc. etc. set and jointed in neat cement slurry 15mm thk cement screed base laid in mortar 1:4 and pointed in white or coloured cement to match all as specified

M & L for Glazed ceramic tiles in vertical surface 450mm x 300mm x 7 mm thick, coloured,on wall surfaces including designer pattern, set and jointed in neat cement slurry and pointed in white cement with pigment to match over 10 mm thick rendering in CM 1:3 all as specified and as directed.

Removing building materials etc to a distance of 5km, beyond the lead included in the rates, including loading, unloading and stacking at the destination.

M/s SL CONSTRUCTION (BID ID -3084431)

VARALAKSHMI CONSTRUCTIONS (BID ID -3076454)