CIVIL AND ELECTRICAL WORKS FOR INSTALLATION OF SINK EDM MACHINE

Removal of old MS/aluminium windows and doors including frame of approx. size up to 1.80m x 1.5m from plastered brick wall by chipping / cutting the holdfasts,handing over the useful material to store, packing the side walls (where the window is removed) with CC 1:2:4 if required and plastering with CM 1:6 to neat level line and finish, curing etc as directed by EIC. The rate shall include for cost of materials,tools, labour charges,taxes,etc

Dismantling/Removal of false ceiling form roof incliding grids etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. as directed by EIC. The rate shall include for cost of materials,tools, labour charges,taxes,etc

Removing old Aluminum/wooden partitions including doors by carefully removing glass,Powder coated Aluminum members of different sections and boards of any description at any height / position and handing over the useful materials to stores including cost of all tools, labour all as directed by EIC

Dismantling of brick work built in cement mortor manually /by mechanical means including stacking of steel bars and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge

Providing, manufacturing and erecting Partly glazed and partly panneled single / Double leaf Aluminium door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members -114.30 x 44.45x 2.15mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.88mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips - Weight of 0.097Kg/RM. I) Aluminium hinges 125mm long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 4 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant, etc

Providing and erecting partly glazed and partly panelled powder coated Aluminium partition using standard sections of JINDAL or HINDALCO so that each pannel shall not exceed 1.20 SQM with 12mm thick pre-laminated board having twin finish of Novopan / TESA in bottom rows and 5mm thick float glass of MODI / ST GOBAIN on middle and top rows including glazing clips, rubber gasket for fixing the glass, filling gaps with silicon sealant,strengthening the partition by taking the required intermediate vertical members up to roof lvel, etc. Specification for aluminum sections to be used is a) Bottom members -114.30 x 44.45x 2.15mm b) Top / vertical members - 63.50 x 38.10 x1.95mm c)Middle memebers - 63.50 x 38.10 x 1.95mm.

Providing & fixing Mineral Fibre suspended Ceilling System with 595mm x 595mm size and 15 to 16mm thick MINATUFF (MICRO LOOK) EDGE TILES having NRC value of 0.7 with ARMSTRONG SILHOUETTE exposed grid or equivalent product from St.Gobain make.INSTALLATION: To Comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using Armstrong /St.Gobain suspension system (specifications below) at 1200 mm maximum centre & not more than 150mm from spliced joints. The Fisrt / Last suspension system at the end of each main runner should not be greater than 600mm from the adjacent wall.1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm modules to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees. he 1200mm Cross tees to have central "birdsmouth" notches facilitate fitting of 600mm cross tees with rate including cost of all all materials,labour,tools,wastage ,taxes,etc all as approved and directed by EIC.

Supplying,providing and laying Epoxy flooring of 2mm thickness from SIKA/CERA/FOSROCK/MYK or equivalent barnd over a applying primer and 2mm thick Epoxy screed of SIKA/CERA/FOSROCK/MYK compound consisting of Base,including cleaning the surface thoroughly,making it free from grease,oil etc,scarifying, filling pot holes with epoxy putty,etc with rateincludingcostofallmaterials,necessary tools,labour charges, transportation,etc complete all as specified and directed by EIC.

Construction of half brick works with locally available flyash bricks in Cm1:6 for partition walls with standard bonds including racking out joints, chipping of existing floor wallsa atc, applying cement slurry before constructing walls to have proper bonds , complete apecified and as directed by EIC

Providing plastering by rendering 15 mm thick Cement mortar 1:6 (one part Cement : Six parts fine sand) over concrete / brick surfaces like ceiling, walls etc.,wherever required and finishing smooth and even, using trowel with all necessary scaffolding at all heights, etc., complete with rates including cost of all material, tools, labour, wastages etc., all as directed and approved by EIC.

Providing and applying on prepared surface and applying two coats of interior acrylic emulsion paint of Asian paints having VOC(volatile organic compound) content less than 50 gram/litter of approved and manufacturer including applying additional coats whrerever required to achiev even shade and colour over a coat of primer of Asian paint having VOC content less than 50gram/litter to prepare the surface even and shade and colour with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified , all made good and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.The rates include for: (a) Use of all scaffoldings and cradles including hoisting and lowering.(b)Taking down, cleaning as directed Use of dust sheets and other coverings for the protection of fixtures, fittings, furniture, etc. Work in patches (over one square metre each) including matching with existing work and marrying in at the edges.

Supplying and sticking UV protected sun control / frosted film having 25 micron thickness over glass panes of windows,partitions and doors including material,labour,wastage etc as directed by EIC.

POINT WIRING: Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm ISI marked FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including earthing the point with 1.5sq mm FRLS PVC insulated flexible copper conductor single core cable and supply & fixing of 10 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex 2 Light points controlled by one switch 5 / 10 A modular type SP switch Make: Legrand/Siemens/L&T/GE.

Providing of LED Light Fixtures: Supply, installation, testing & commissioning of Recessed Mounted 2 X 2 ft (36-40) watt LED Full out put Luminaries with CRCA power coated With high diffuser efficiency of 3600 lumens with necessary fixing accessories as per site & inter-connection complete Make: philips / CGL / Wipro / FA /Havells / Bajaj

POWER WIRING: Providing and laying of 2 runs of 2.5 sq mm and 1 runs of 1.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Polycab/Havells/Finolex only)

POWER WIRING: Providing and laying of 4 runs of 6.0 sq mm and 2 runs of 4 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

Providing of Independent Modular Sockets & Switches: Supply and fixing of following items with 2 mm thick GI modular box independent concealed in the wall with inter connection complete. 3 No, 6 Amp 3/2 pin multiple universal socket controlled one no.6 Amp switch each & 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch. Make: Legrand/Siemens for 230V Supply

PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 2 Nos 6/16 amps 3 pin multiple socket controlled by 2 No. 16 amps SP MODULAR switch of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement.The box shall be mounted on concelled/ surface of wall / floor with all requred ccessories as per site condition. Make:Legrand / Crabtree

COPPER PLATE EARTHING:Making Earth pit complete with copper plate 60 cm x 60 cm x 3.15 mm thick electrode and 25 mmx3 mm copper strip. Copper plate is to be buried directly in ground with top edge of the plate not less than 3.0 metres below normal ground level. Copper strip to be bolted with the earth plate at three points by means of copper bolts, nuts, check nuts and washers. Earth strip to be extended upto earth test point in earth chamber at ground level. Scope of work includes excavation of earth & refilling, drilling hole to electrodes, supply and covering the earth plate with alternate layer of salt and charcoal (not less than 15.0 cm on both side of plate), PCC pit and CI cover, Funnel with watering pipe, wire mesh and copper lugs etc as specified, GI protection pipe of size as specified for protection of earthing lead from top of earth plate upto earth chamber, laying copper strip of length of 5.0 mtrs connecting from test point to mainswitch or switch board or equipment and any other work necessary to complete making earth pit in all respect. Note: Earth resistance to be achived 0.5 ohms by connecting all eartpits as grid as directed by EIC

EARTH STRIP:Supply & laying of 25 mm x 5 mm Copper Strip on porciline insulators clamped to walls at distance of one meter or on cable trays, run in pipes, run underground etc., as required including interconnection between the earth stations etc., complete as required conforming to IS: 3043-1987. Scope of work includes supply of calmping materials necessary to complete work in all respect as per direction of EIC.

MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 32A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

Sub-total Rs.

(A) Quoted percentage (Excess or below)

(B) Sub-Total Amount excluding GST Rs. [after considering percentage at (A)]

(C)Add 18% GST on Value on (B) in Rs.

(D) Grand Total : [ B+C] in Rs.

GST SAC Code No

Example: 1. If the contractor wish to quote 5% below estimated amount, then they need to enter "- 5 %" in Green colour Column against Quoted percentage (Excess or below) 2. If the contractor wish to quote 2% excess over estimated amount, then they need to enter "2 % " in Green colour Column against Quoted percentage (Excess or below)

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION

HYDERABAD - 500 042.

Pre-Qualification Profile (To Be uploaded along with Part A)

Tender Notice No.:

Estimated Amount in Rs.

Tender Notice Date:

Tender Submission Date:

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Contact person name

Designation

Mobile No.

Ph. No. with STD code

FAX No. with STD code

Email Id :

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

2022-23 (Ending on 31-03-2023) Rs.

2023-24 (Ending on 31-03-2024) Rs.

2024-25 (Ending on 31-03-2025) Rs.

Average annual Financial turn over

Avg Annual Turnover criteria is not met

ESI & PF Nos with proof (If any)

ESI Registration No/. with proof if any

PF Registration No. with proof if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

Branch, Place

Bank Code No.

MICR No.

ECS No.

IFS Code No.

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Name of Bank & Branch

Date of Issue [MM/DD/YYYY]:

Date of Issue of solvency certificate is NOT with in One Year. Submit Valid Solvency

Value in Rs.

Solvency value is NOT as per NIT. Submit required value Solvency

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Completed similar works during last 7 years

Work NoI

Brief Description of Work:

Completed value of Work in Rs. :

Date of Commencement of Work [MM/DD/YYYY]:

Date of Actual Completion of Work [MM/DD/YYYY]:

Work Competion is NOT with in 7 years

Work No II

Brief Description of Work:

Completed value of Work in Rs. :

Date of Commencement of Work [MM/DD/YYYY]:

Date of Actual Completion of Work [MM/DD/YYYY]:

Work Competion is NOT with in 7 years

Work No III

Brief Description of Work:

Completed value of Work in Rs. :

Date of Commencement of Work [MM/DD/YYYY]:

Date of Actual Completion of Work [MM/DD/YYYY]:

Work Competion is NOT with in 7 years

Details of person holding the power of Attorney (If different from contact person)

Position

Mobile No.

Ph. No. with STD code

FAX No. with STD code

DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and award of work.

DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5. I/We have not imposed any condition in price bid, I/We have not modified any part of tender documents issued by HAL.