PROVISION OF FURNITURE STORAGE YARD AT CG LAND CHICOLNA GOA

Amount

SCHEDULE "A" Part - I (BUILDING & STRUCTURE WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( SITE CLEARANCE, EXCAVATION & EARTHWORK) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" Part - III (INTERNAL WATER SUPPLY) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-IV( INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" Part - V (ROAD/PATH/CULVERT/ HARD STANDING) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART- VI( SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" Part - VII (AREA DRAINAGE) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART- VIII (GALVALUME SHEET WORK SHED ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" Part - IX (FENCING AND GATE) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART- X( EXTERNAL WATER SUPPLY ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART- XI ( EXTERNAL ELECTRIFICATION ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART - XII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

Internal Water Supply: S & F Two way Bib tap 15 mm dis of make Drizzel or equivalent in list of approved make enclosed

S & F Health Faucet with wall hook of make Hindware model no F160027 or equivalent in list of approved make enclosed

Internal Electric Supply: S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Havells Cat-Part No. MAGNUMGRANDGOLD20WLED857SPCL or equivalent in list of approved make enclosed

S & F 40 W Energy saving long life corrosion resistant, verticle/ horrizontal surface mounting with high power LED batten as light source with luminous efficacy of ≥ 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, having input voltage 220-240V, input frequency 50-60 Hz, PF>0.95 including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Havells Cat-Part No. MAGNUMGRANDNEOIP6640WLED865SPC or equivalent in list of approved make enclosed

S & F modular type bell ding dong of 2 module size, conforming to IS 8884-1978 complete all as specified and directed. Make:Legrand Arteor Cat-Part No. 5734 69 or equivalent in list of approved make enclosed

S & F 12 W surface/wall mounted round shape LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Havells Cat-Part No. LHEBABP5IZ1W012 or equivalent in list of approved make enclosed

S & F 10 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Havells Cat-Part No. LHEXACP5IN1W010 or equivalent in list of approved make enclosed

S & F 25 W LED building security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of > 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high efficiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, seperate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket 1.5mt long including necessaru electrical connection to the fixture with 3 core flexible Copper conductor cable of appropriate size and light grade GI pipe of dia 20mm including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. Make: BajalCat-Part No. BCLST 20W LED I or equivalent in list of approved make enclosed

S & F BLDC five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downrod of suitable size and electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Crompton Cat-Part No. ENTRUST50 or Havells Cat- Part No. ES-50 or equivalent in list of approved make attached

S & F engery efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent in list of approved make attached

S & F engery efficient metalic exhaust fan having blade sweep 300 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. TRANS AIR 12" or equivalent in list of approved make attached

Supply, instllation, testing and commissioning of metal enclosure for housing 3 phase Energy meter

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified and directed by engineer-in-charge. 6 A, SP MCB, C- curve

16 A, DP MCB, C- curve

25 A, FP MCB, C- curve

16 A, SP MCB, C- curve

32A, 30mA, 230V, 50Hz TP, RCBO

EXTERNAL ELECTRIC SUPPLY: Supply, install,test and commision LT panel board, TPN 415 Volts, 50 Hz, 200Amp capacity of copper bus bar, Outdoor Cubicle type, floor mounted, factory made dust and vermin proof, IP-54, fabricated out of 3.15 mm thick CRCA Sheet, fixed on MS angle iron frame of 50X50X6 mm with cable chamber for individual feeders for incoming and out going connections, one set of indicator lamp RYB with switch and fuse, multyfunction panel meter etc and with the following:- Incoming:- MCCB 4 pole, 18KA, 63 Amp, microprocessor release - 01 Nos. Outgoing:- (a) MCB, TPN 25 amps, 415 Volts -04 Nos (Shopping complex -01 No, BSO office - 02 Nos, Spare - 01No). (b) Voltmeter Digital type (c) Ammeter digital type (d) Indicator lamp with toggle switch set of 3

EXTERNAL WATER SUPPLY: M & L for cutting/ joining the existing GI pipe up to 50mm dia and inserting Tee for taking branch connection including excavation, earthwork etc complete as specified and directed

M & L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 3, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. all as specified and directed by engineer- in - charge.

M/s. R.S. LAWANDE

pk janardhanan