Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L1 | Accepted-AOC AOC | |
| 2 | L2₹36.8 L+₹96,176 (2.68%)Rejected-Finance 3 100 2 KOTIAN CO NH66 KULAI POST SURATHKAL MANGALORE DAKSHINA KANNADA KARNATAKA 575019 | DAKSHINA KANNADA | KARNATAKA | 575019 | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹39.3 L+₹3.4 L (9.45%)Rejected-Finance | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹40.9 L+₹5.1 L (14.1%)Rejected-Finance PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L4 | Rejected-Finance BEING NOT L1 |
Tender Value
₹42.6 L
EMD Value
₹85,300
Closing Date
1 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (I) (CG) Goa
Garrison Engineer (I) (CG) Goa HQ Coast Guard DHQ-11 Chicolna PO- Bogmalo Goa 403806
PROVISION OF KITCHEN CABINETS AND MISC WORKS IN BLDG NO P-43 TO P-88 OF CGRA KANKANADY MANGALORE UNDER GE(I)(CG) GOA
2024_MES_639924_1
8456/GOA/E8
Open Tender
Miscellaneous Works
Item Rate
210 days
BLDG NO P 43 TO P 88 CGRA KANKANADY MANGALORE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (I) (CG) Goa
₹85,300
Yes
22 Mar 2024
31 Jan 2024
8 Mar 2024
31 Jan 2024
1 Mar 2024
15 Feb 2024
31 Jan 2024 - 7 Feb 2024
Amount
Taking down chowkats or frames n exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed
Taking down and re-fixing of shutters in same opening n exc 1 Sqm each complete all as specified and directed
Taking down and re-fixing of shutters in same opening but exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed
S & F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed
S & F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board with commercial veneering on both faces the size of rails and stile as per IS -1003 kiln seasoned and chemically pressure treated complete all as specified and directed
S & F 30mm thick Glazed and skelton shutters 2nd class hard wood, open rebated and prepared to receive glass, guage etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed
S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
M & L Plain WPC door frame 100mm x 50mm Decorative including all fixing arrangements /accessories for fixing WPC shutter providing Brand Factory Made 30mm thick 100% solid WPC (Wood polymer Composite) Solid Plain flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade) Calcium Carbonate and natural Fibers (Wood Powders/rice husk/wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbn having good screw holding capacity (Screw Withdrawal strength of 2000N (Face) & 1100 N (Edge)., Minimimum Compressive Strengh of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Fee Water/Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full doby threaded star headed counter sunk SS Screws complete all as specified and directed
M & L Plain WPC shutter 30mm thick with all fixing accessoried all as directed providing Brand Factory Made 30mm thick 100% solid WPC (Wood polymer Composite) Solid Plain flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade) Calcium Carbonate and natural Fibers (Wood Powders/rice husk /wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbn having good screw holding capacity (Screw Withdrawal strength of 2000N (Face) & 1100 N (Edge). Minimimum Compressive Strengh of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Fee Water/Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full doby threaded star headed counter sunk SS Screws complete all as specified and directed
M & L Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M & L Preparing old treated wooden surface of any description over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed
S & F Mild steel hold fast for chowkats and other small articles complete all as specified and directed
M & L Plain cement concrete (1:2:4) type B-1,(using 20mm graded stone aggregate) as in “hold fast block including necessary form work complete all as specified and directed.
S & F Factory made PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour, PVC sheet reinforced with Mild steel square tube complete all as specified and directed
S & F Factory made Solid PVC Moulded Door Shutters 28 to 30mm thick (stile:) with wood free EPS, with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed
S & F Powder coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed
S & F Powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, three track sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed
S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed
S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening as per requirement complete all as specified and directed
S & F 100mm size Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed
S & F 75mm size Stainless steel butt hinges fixed to frame complete all as specified and directed.
M & L 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed
S & F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
S & F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed
S & F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring overall length of cover plate 140 mm and fixed complete all as specified and directed
S & F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of apeture 1.40mm and fixed with aluminium wire stapples complete all as specified and directed
M & L Providing & fixing of Aluminium composite panel of approved make and colour for wall cladding for straight Brick/Rcc/stone walls & columns/beams with necessary Aluminium frame works at required level made out of 50 x 25 x 3mm 'C' section equivalent. The panel should consist of 3mm thermoplastic core of antitoxic LDPE sandwiched between 0.5 skins thick Aluminium sheet making a total panel thickness of 4 mm. The surfaces will be finished with PVDF based coating on top sides and service coating on reverse sides would be in polyster paint. The system shall be fixed using GI brackets, Aluminium 'L' cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done using silicon weather proofing sealant with necessary rods etc., complete with all lead & lift, as per manufacturers specifications complete all as specified and directed.
S & F Stainless steel auto hinges for kitchen cupboard shutter of required size complete all as specified and directed.
S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
S & F 75mm size extruded brass handles, fabricated type polished complete all as specified and directed.
M & L Hacking out old broken glass (any thickness, size quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.
S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in sqm n exc .5 Sqm in each pane complete all as specified and directed.
S & F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sq.m in each pane complete all as specified and directed.
M & L Cement mortor 1:6 Forming jambs, etc to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.
M & L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed.
M & L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.
S & F Fortune wall mount glass corner shelf/ Bathroom shelf/ Kitchen shelf /multi functional storage shelf, bath room accessories for home and hotels etc complete all as specified and directed.
S & F looking mirror of size 600mm x 450mm, 5mm thick bevelled edge mounted on 6mm thick plywood including fixing with screws and cup washers complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified and directed.
Supplying and laying of 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.
Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.
M & L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.
S & F in repairs Pillar taps fancy type 15mm bore cast copper alloy, with capstain heads, chromium plated screwed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S & F in repairs Bib taps fancy type, Chromium plated for iron pipe and fixed 15mm bore complete all as specified and directed.
S & F in repairs Stop valves cast copper alloy 15mm dia, fancy type, chromium plated, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F PVC connection 15mm size with PTMT nuts of lengths 450mm, complete all as specified and directed.
S & F in repairs Health faucet Chromium plated (hand shower type) with shut off valve (thumb or fush button type) to allow controlled and continuous flow of water with flexible polythene pipe of adequate length and with wall mounted pedestal for hanging faucet including taking down of old one complete all as specified and directed.
S & F in repairs Soap dish vitreous china coloured appx size 160mm x 160mm x 90mm recessed type fixed to plugs with Chromium plated brass screws complete all as specified and directed.
S & F in repairs vitreous china wash basin, white, flat back, size 630mm x 450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and 32mm dia waste pipe complete all as specified and directed.
S & F PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe complete all as specified and directed.
S & F Vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including floor trap and making good damaged/ disturbed surfaces complete all as specified and directed.
S & F in repairs 32mm dia Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.
S & F in repairs water closet (squatt pattern) vitreous china 'Orissa 'pettern size 580mm x 440mm white with integral foot rests excluding flushing cistern but including PVC flush pipe & provision of lime concrete bedding complete all as specified and directed.
S & F in repairs of Waste coupling 40mm dia of PTMT (half or full threaded)(Minimum weight 32mm?45gms/40mm-60 gms)complete all as specified and directed.
S & F in repairs of Waste coupling 32mm dia of PTMT (half or full threaded)(Minimum weight 32mm?45gms/40mm-60 gms)complete all as specified and directed.
Demolition of cement concrete in ground floors and paving n exc 15cm thickness (below or above ground level) including plinth protection complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M & L Virified Ceramic tiles light shade of 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors , etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed 1:4 complete all as specified and directed
All as per Item No 60.00 here-in- before but as in skirting over 10mm thick rendering in Cement mortar (1:4) complete all as specified and directed.
M & L 25mm thick cement concrete type B-O (using 12.50mm graded crushed stone aggregate) as in floors finished rough to receive floor finishes complete all as specified and directed.
M & L Non-skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular), area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M & L Glazed ceramic tiles in vertical surface 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing plaster in cement mortar 1:4 complete all as specified and directed.
M & L 75mm thick Plain cement concrete 1:3:6 Mix type C2 as in sub base/plinth protection and in path surface to be finished without using extra cement complete all as specified and directed.
Taking down cement plaster on brick walls including racking out joints haking for keys scrubbing down with water etc complete all as specified and directed.
M & L rendering 15mm thick in Cement mortar 1:6 on fair surfaces of brick works/concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.
M & L rendering 10mm thick plaster in Cement mortar 1:3 on fair faces of concrete surfaces as in ceiling complete all as specified and directed.
M & L rendering 15mm thick in Cement mortar 1:4 on finished with water proofing compound @ 3% by weight of cement finish the surfaces even and fair complete all as specified and directed. [Note:- WPC will be measured and paid separately]
Supply only integral water proofing compound complete all as specified and directed.
M & L Preparation of finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm complete all as specified and directed.
M & L Preparing new plastered surfaces of walls and complete removing of existing surfaces and applying two coats of oil emulson distemper over one coat of cement primer complete all as specified and directed.
M & L Preparing old treated steel surface of any description over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.
S & F Water Storage tank ISI marked of capacity 1000 ltrs hoisted and fixed in position including ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube including dismantling of old one etc complete all as specified and directed.
S & F in repairs Gunmetal globe or gate valve 20mm dia iron wheel head screwed both ends for PVC pipes including taking out old one complete all as specified and directed.
S & F Joist, Channel, angle, or tee sections fixed independently, as in `Y' section/swan neck etc without connecting plates, etc. (cut to ordinary lengths i.e within 20mm of the length indicated) grade Fe-410(Gde E-250) complete all as specified and directed.
M & L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 grade 165 quality A complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
M & L Precast Reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in man hole cover slabs etc set in cement mortar (1:4) including use and waste of form work (reinforcement shall be measured and paid for relevant item) complete all as specified and directed.
M & L TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified and directed.
M & L TMT bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified and directed.
Demolition of Stone slabs and tiles laid bedded and pointed of any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
Supplying & Laying of 60mm thick machine pressed precast concrete paver block any shape & size confirming to IS 15658-2006 of M-35 grade with grey cement and pigment etc complete all as specified and directed.
M & L 100mm thick Plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base etc complete all as specified and directed.
M & L Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed.
S & F 20mm dia float valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.
S & F in repairs toilet paper holder of Stainless steel of size 10.5cm x 9cm fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
S & F in repairs brass chromium plated towel rail 20mm dia, 'D' type 600mm long between flanges with brackets fixed to walls with brass screws complete all as specified and directed.
M & L Preparation and complete removal of existing treatment of walls and applying two coats of oil emulsion distemper (white/tinted) complete all as specified and directed.
M & L Preparing old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
Taking down electric switch board and re-fixing on same position complete all as specified and directed.
S & F in repairs long shank Bib taps fancy type, Chromium plated for iron pipe and fixed 15mm bore complete all as specified and directed.
S & F in repairs 32mm dia Harrison rails,stainless steel fancy type with fixing brackets, stops, rollers etc complete all as specified and directed.
S & F Utensil rack (Plate rack) made out of 1mm thick Stainless steel of size 31inch x 30 inch x 10inch fixed to wall with chromium plated brass screw 30 to 50mm size including all internal fittings of untensil rack as per sample approved complete all as specified and directed.
KOTIAN -ECC
SIRI SALES AND SERVICES
Gates Infra Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .