Construction of Paver Block Road from PWD Road to Sitai Kishan Mandi under Sitai-I G.P. within Sitai P.S. of District Cooch Behar. SL1

Picking up and removing old bituminous layer or sand sealing coat from old black topped surface and cleaning the exposed surface by scraping and stacking the material as directed. (ii) From 50 mm to 100 mm thick. (a) By manual means : (i) From 25 mm to 50 mm thick.

Supplying and laying in the specific pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks ( with Concrete grade as per table- 1 of IS -15658-2006) manufactured in steel mouls clamped to a vibrating table by hydraulic pressure (as per clause no 6.30 of IRC-SP-63 (2018) from BIS licence manufacture with spacer nib (small protruding profiles on the vertical faces of a paver block used as a device for keeping minimum joints gap in between paving blocks as per clause 3.25 of IS 15658 and of specific size and shape etc 80 mm thick coloured Decorative. .

Construction of Sub Base using Local Materials: Construction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal as necessary, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, lighting, guarding and barricading including cost and carriage of all materials and making necessary earthen bundh of one metre wide on each side to protect the edges complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. River bazree

Excavation for Structures Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 for Rural Roads of MORD including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing and fixing concrete Signboard as per I RC.specification of size 900 X 750 X 37 mm thick made with R. C .C. (1:1.5:3) with pakur variety stone chips reinforced with double layer IRC. fabric ( 75 X 75 mm mesh ) and fixed with necessary nuts & bolts on two RC. precast post 100 mm X 150 mm of high 2.65 m of which top 750 mm is of section 100 mm X 13 mm and 1.90 metre above G. L. & 0.75 metre below G. L. including digging hole, repacking the same with cement concrete (1:3:6 ) with local stone chips etc.complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-charge ( The rate is inclusive of cost of reinforcement concrete, shuttering, nuts & bolts, washer etc. complete)